[syslinux:master] zlib: update to zlib 1.2.5
syslinux-bot for H. Peter Anvin
hpa at zytor.com
Mon Jul 5 13:45:30 PDT 2010
Commit-ID: 9a332c5f03c9f9cc81f6c247c6d248a715f6eabb
Gitweb: http://syslinux.zytor.com/commit/9a332c5f03c9f9cc81f6c247c6d248a715f6eabb
Author: H. Peter Anvin <hpa at zytor.com>
AuthorDate: Mon, 5 Jul 2010 13:41:04 -0700
Committer: H. Peter Anvin <hpa at zytor.com>
CommitDate: Mon, 5 Jul 2010 13:41:04 -0700
zlib: update to zlib 1.2.5
Update zlib to zlib 1.2.5.
Signed-off-by: H. Peter Anvin <hpa at zytor.com>
---
com32/include/zconf.h | 281 +++++++---
com32/include/zlib.h | 1293 ++++++++++++++++++++++++++++++---------------
com32/lib/zlib/FAQ | 347 +++++++------
com32/lib/zlib/README | 89 ++--
com32/lib/zlib/adler32.c | 136 ++++-
com32/lib/zlib/compress.c | 6 +-
com32/lib/zlib/crc32.c | 202 ++++++--
com32/lib/zlib/deflate.c | 495 +++++++++++++++---
com32/lib/zlib/deflate.h | 49 ++-
com32/lib/zlib/infback.c | 105 ++--
com32/lib/zlib/inffast.c | 95 +++-
com32/lib/zlib/inffast.h | 4 +-
com32/lib/zlib/inflate.c | 382 +++++++++++---
com32/lib/zlib/inflate.h | 37 +-
com32/lib/zlib/inftrees.c | 69 ++-
com32/lib/zlib/inftrees.h | 27 +-
com32/lib/zlib/trees.c | 138 +++--
com32/lib/zlib/trees.h | 5 +-
com32/lib/zlib/uncompr.c | 5 +-
com32/lib/zlib/zlib.3 | 66 +--
com32/lib/zlib/zutil.c | 68 ++--
com32/lib/zlib/zutil.h | 67 ++-
22 files changed, 2712 insertions(+), 1254 deletions(-)
diff --git a/com32/include/zconf.h b/com32/include/zconf.h
index 031f08d..02ce56c 100644
--- a/com32/include/zconf.h
+++ b/com32/include/zconf.h
@@ -1,53 +1,134 @@
/* zconf.h -- configuration of the zlib compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+/* @(#) $Id$ */
+
#ifndef ZCONF_H
#define ZCONF_H
/*
* If you *really* need a unique prefix for all types and library functions,
* compile with -DZ_PREFIX. The "standard" zlib should be compiled without it.
+ * Even better than compiling with -DZ_PREFIX would be to use configure to set
+ * this permanently in zconf.h using "./configure --zprefix".
*/
-#ifdef Z_PREFIX
-# define deflateInit_ z_deflateInit_
-# define deflate z_deflate
-# define deflateEnd z_deflateEnd
-# define inflateInit_ z_inflateInit_
-# define inflate z_inflate
-# define inflateEnd z_inflateEnd
-# define deflateInit2_ z_deflateInit2_
-# define deflateSetDictionary z_deflateSetDictionary
-# define deflateCopy z_deflateCopy
-# define deflateReset z_deflateReset
-# define deflatePrime z_deflatePrime
-# define deflateParams z_deflateParams
-# define deflateBound z_deflateBound
-# define inflateInit2_ z_inflateInit2_
-# define inflateSetDictionary z_inflateSetDictionary
-# define inflateSync z_inflateSync
-# define inflateSyncPoint z_inflateSyncPoint
-# define inflateCopy z_inflateCopy
-# define inflateReset z_inflateReset
-# define compress z_compress
-# define compress2 z_compress2
-# define compressBound z_compressBound
-# define uncompress z_uncompress
-# define adler32 z_adler32
-# define crc32 z_crc32
-# define get_crc_table z_get_crc_table
-
-# define Byte z_Byte
-# define uInt z_uInt
-# define uLong z_uLong
-# define Bytef z_Bytef
-# define charf z_charf
-# define intf z_intf
-# define uIntf z_uIntf
-# define uLongf z_uLongf
-# define voidpf z_voidpf
-# define voidp z_voidp
+#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */
+
+/* all linked symbols */
+# define _dist_code z__dist_code
+# define _length_code z__length_code
+# define _tr_align z__tr_align
+# define _tr_flush_block z__tr_flush_block
+# define _tr_init z__tr_init
+# define _tr_stored_block z__tr_stored_block
+# define _tr_tally z__tr_tally
+# define adler32 z_adler32
+# define adler32_combine z_adler32_combine
+# define adler32_combine64 z_adler32_combine64
+# define compress z_compress
+# define compress2 z_compress2
+# define compressBound z_compressBound
+# define crc32 z_crc32
+# define crc32_combine z_crc32_combine
+# define crc32_combine64 z_crc32_combine64
+# define deflate z_deflate
+# define deflateBound z_deflateBound
+# define deflateCopy z_deflateCopy
+# define deflateEnd z_deflateEnd
+# define deflateInit2_ z_deflateInit2_
+# define deflateInit_ z_deflateInit_
+# define deflateParams z_deflateParams
+# define deflatePrime z_deflatePrime
+# define deflateReset z_deflateReset
+# define deflateSetDictionary z_deflateSetDictionary
+# define deflateSetHeader z_deflateSetHeader
+# define deflateTune z_deflateTune
+# define deflate_copyright z_deflate_copyright
+# define get_crc_table z_get_crc_table
+# define gz_error z_gz_error
+# define gz_intmax z_gz_intmax
+# define gz_strwinerror z_gz_strwinerror
+# define gzbuffer z_gzbuffer
+# define gzclearerr z_gzclearerr
+# define gzclose z_gzclose
+# define gzclose_r z_gzclose_r
+# define gzclose_w z_gzclose_w
+# define gzdirect z_gzdirect
+# define gzdopen z_gzdopen
+# define gzeof z_gzeof
+# define gzerror z_gzerror
+# define gzflush z_gzflush
+# define gzgetc z_gzgetc
+# define gzgets z_gzgets
+# define gzoffset z_gzoffset
+# define gzoffset64 z_gzoffset64
+# define gzopen z_gzopen
+# define gzopen64 z_gzopen64
+# define gzprintf z_gzprintf
+# define gzputc z_gzputc
+# define gzputs z_gzputs
+# define gzread z_gzread
+# define gzrewind z_gzrewind
+# define gzseek z_gzseek
+# define gzseek64 z_gzseek64
+# define gzsetparams z_gzsetparams
+# define gztell z_gztell
+# define gztell64 z_gztell64
+# define gzungetc z_gzungetc
+# define gzwrite z_gzwrite
+# define inflate z_inflate
+# define inflateBack z_inflateBack
+# define inflateBackEnd z_inflateBackEnd
+# define inflateBackInit_ z_inflateBackInit_
+# define inflateCopy z_inflateCopy
+# define inflateEnd z_inflateEnd
+# define inflateGetHeader z_inflateGetHeader
+# define inflateInit2_ z_inflateInit2_
+# define inflateInit_ z_inflateInit_
+# define inflateMark z_inflateMark
+# define inflatePrime z_inflatePrime
+# define inflateReset z_inflateReset
+# define inflateReset2 z_inflateReset2
+# define inflateSetDictionary z_inflateSetDictionary
+# define inflateSync z_inflateSync
+# define inflateSyncPoint z_inflateSyncPoint
+# define inflateUndermine z_inflateUndermine
+# define inflate_copyright z_inflate_copyright
+# define inflate_fast z_inflate_fast
+# define inflate_table z_inflate_table
+# define uncompress z_uncompress
+# define zError z_zError
+# define zcalloc z_zcalloc
+# define zcfree z_zcfree
+# define zlibCompileFlags z_zlibCompileFlags
+# define zlibVersion z_zlibVersion
+
+/* all zlib typedefs in zlib.h and zconf.h */
+# define Byte z_Byte
+# define Bytef z_Bytef
+# define alloc_func z_alloc_func
+# define charf z_charf
+# define free_func z_free_func
+# define gzFile z_gzFile
+# define gz_header z_gz_header
+# define gz_headerp z_gz_headerp
+# define in_func z_in_func
+# define intf z_intf
+# define out_func z_out_func
+# define uInt z_uInt
+# define uIntf z_uIntf
+# define uLong z_uLong
+# define uLongf z_uLongf
+# define voidp z_voidp
+# define voidpc z_voidpc
+# define voidpf z_voidpf
+
+/* all zlib structs in zlib.h and zconf.h */
+# define gz_header_s z_gz_header_s
+# define internal_state z_internal_state
+
#endif
#if defined(__MSDOS__) && !defined(MSDOS)
@@ -59,8 +140,10 @@
#if defined(_WINDOWS) && !defined(WINDOWS)
# define WINDOWS
#endif
-#if (defined(_WIN32) || defined(__WIN32__)) && !defined(WIN32)
-# define WIN32
+#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__)
+# ifndef WIN32
+# define WIN32
+# endif
#endif
#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32)
# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__)
@@ -104,13 +187,13 @@
# define STDC
#endif
-#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
+#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */
# define STDC
#endif
#ifndef STDC
-# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
-# define const /* note: need a more gentle solution here */
+# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */
+# define const /* note: need a more gentle solution here */
# endif
#endif
@@ -134,7 +217,7 @@
* gzip.)
*/
#ifndef MAX_WBITS
-# define MAX_WBITS 15 /* 32K LZ77 window */
+# define MAX_WBITS 15 /* 32K LZ77 window */
#endif
/* The memory requirements for deflate are (in bytes):
@@ -150,9 +233,9 @@
for small objects.
*/
- /* Type declarations */
+ /* Type declarations */
-#ifndef OF /* function prototypes */
+#ifndef OF /* function prototypes */
# ifdef STDC
# define OF(args) args
# else
@@ -199,7 +282,7 @@
# define ZEXTERN extern __declspec(dllimport)
# endif
# endif
-# endif /* ZLIB_DLL */
+# endif /* ZLIB_DLL */
/* If building or using zlib with the WINAPI/WINAPIV calling convention,
* define ZLIB_WINAPI.
* Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI.
@@ -247,75 +330,99 @@
#endif
#if !defined(__MACTYPES__)
-typedef unsigned char Byte; /* 8 bits */
+typedef unsigned char Byte; /* 8 bits */
#endif
-typedef unsigned int uInt; /* 16 bits or more */
-typedef unsigned long uLong; /* 32 bits or more */
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
#ifdef SMALL_MEDIUM
/* Borland C/C++ and some old MSC versions ignore FAR inside typedef */
# define Bytef Byte FAR
#else
-typedef Byte FAR Bytef;
+ typedef Byte FAR Bytef;
#endif
-typedef char FAR charf;
-typedef int FAR intf;
-typedef uInt FAR uIntf;
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
typedef uLong FAR uLongf;
#ifdef STDC
-typedef void const *voidpc;
-typedef void FAR *voidpf;
-typedef void *voidp;
+ typedef void const *voidpc;
+ typedef void FAR *voidpf;
+ typedef void *voidp;
#else
-typedef Byte const *voidpc;
-typedef Byte FAR *voidpf;
-typedef Byte *voidp;
+ typedef Byte const *voidpc;
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */
+# define Z_HAVE_UNISTD_H
+#endif
+
+#ifdef STDC
+# include <sys/types.h> /* for off_t */
#endif
-#if 0 /* HAVE_UNISTD_H -- this line is updated by ./configure */
-# include <sys/types.h> /* for off_t */
-# include <unistd.h> /* for SEEK_* and off_t */
+/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and
+ * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even
+ * though the former does not conform to the LFS document), but considering
+ * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as
+ * equivalently requesting no 64-bit operations
+ */
+#if -_LARGEFILE64_SOURCE - -1 == 1
+# undef _LARGEFILE64_SOURCE
+#endif
+
+#if defined(Z_HAVE_UNISTD_H) || defined(_LARGEFILE64_SOURCE)
+# include <unistd.h> /* for SEEK_* and off_t */
# ifdef VMS
-# include <unixio.h> /* for off_t */
+# include <unixio.h> /* for off_t */
+# endif
+# ifndef z_off_t
+# define z_off_t off_t
# endif
-# define z_off_t off_t
#endif
+
#ifndef SEEK_SET
-# define SEEK_SET 0 /* Seek from beginning of file. */
-# define SEEK_CUR 1 /* Seek from current position. */
-# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
+# define SEEK_SET 0 /* Seek from beginning of file. */
+# define SEEK_CUR 1 /* Seek from current position. */
+# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */
#endif
+
#ifndef z_off_t
-# define z_off_t long
+# define z_off_t long
+#endif
+
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+# define z_off64_t off64_t
+#else
+# define z_off64_t z_off_t
#endif
#if defined(__OS400__)
-#define NO_vsnprintf
+# define NO_vsnprintf
#endif
#if defined(__MVS__)
# define NO_vsnprintf
-# ifdef FAR
-# undef FAR
-# endif
#endif
/* MVS linker does not support external names larger than 8 bytes */
#if defined(__MVS__)
-# pragma map(deflateInit_,"DEIN")
-# pragma map(deflateInit2_,"DEIN2")
-# pragma map(deflateEnd,"DEEND")
-# pragma map(deflateBound,"DEBND")
-# pragma map(inflateInit_,"ININ")
-# pragma map(inflateInit2_,"ININ2")
-# pragma map(inflateEnd,"INEND")
-# pragma map(inflateSync,"INSY")
-# pragma map(inflateSetDictionary,"INSEDI")
-# pragma map(compressBound,"CMBND")
-# pragma map(inflate_table,"INTABL")
-# pragma map(inflate_fast,"INFA")
-# pragma map(inflate_copyright,"INCOPY")
+ #pragma map(deflateInit_,"DEIN")
+ #pragma map(deflateInit2_,"DEIN2")
+ #pragma map(deflateEnd,"DEEND")
+ #pragma map(deflateBound,"DEBND")
+ #pragma map(inflateInit_,"ININ")
+ #pragma map(inflateInit2_,"ININ2")
+ #pragma map(inflateEnd,"INEND")
+ #pragma map(inflateSync,"INSY")
+ #pragma map(inflateSetDictionary,"INSEDI")
+ #pragma map(compressBound,"CMBND")
+ #pragma map(inflate_table,"INTABL")
+ #pragma map(inflate_fast,"INFA")
+ #pragma map(inflate_copyright,"INCOPY")
#endif
#endif /* ZCONF_H */
diff --git a/com32/include/zlib.h b/com32/include/zlib.h
index 92edf96..bfbba83 100644
--- a/com32/include/zlib.h
+++ b/com32/include/zlib.h
@@ -1,7 +1,7 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.1, November 17th, 2003
+ version 1.2.5, April 19th, 2010
- Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler
+ Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -37,43 +37,44 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.1"
-#define ZLIB_VERNUM 0x1210
+#define ZLIB_VERSION "1.2.5"
+#define ZLIB_VERNUM 0x1250
+#define ZLIB_VER_MAJOR 1
+#define ZLIB_VER_MINOR 2
+#define ZLIB_VER_REVISION 5
+#define ZLIB_VER_SUBREVISION 0
/*
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed data.
+ This version of the library supports only one compression method (deflation)
+ but other algorithms will be added later and will have the same stream
+ interface.
+
+ Compression can be done in a single step if the buffers are large enough,
+ or can be done by repeated calls of the compression function. In the latter
+ case, the application must provide more input and/or consume the output
(providing more output space) before each call.
- The compressed data format used by the in-memory functions is the zlib
- format, which is a zlib wrapper documented in RFC 1950, wrapped around a
- deflate stream, which is itself documented in RFC 1951.
+ The compressed data format used by default by the in-memory functions is
+ the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped
+ around a deflate stream, which is itself documented in RFC 1951.
- The library also supports reading and writing files in gzip (.gz) format
+ The library also supports reading and writing files in gzip (.gz) format
with an interface similar to that of stdio using the functions that start
with "gz". The gzip format is different from the zlib format. gzip is a
gzip wrapper, documented in RFC 1952, wrapped around a deflate stream.
- The zlib format was designed to be compact and fast for use in memory
+ This library can optionally read and write gzip streams in memory as well.
+
+ The zlib format was designed to be compact and fast for use in memory
and on communications channels. The gzip format was designed for single-
file compression on file systems, has a larger header than zlib to maintain
directory information, and uses a different, slower check method than zlib.
- This library does not provide any functions to write gzip files in memory.
- However such functions could be easily written using zlib's deflate function,
- the documentation in the gzip RFC, and the examples in gzio.c.
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
+ The library does not install any signal handler. The decoder checks
+ the consistency of the compressed data, so the library should never crash
+ even in case of corrupted input.
*/
typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
@@ -97,7 +98,7 @@ typedef struct z_stream_s {
free_func zfree; /* used to free the internal state */
voidpf opaque; /* private data object passed to zalloc and zfree */
- int data_type; /* best guess about the data type: ascii or binary */
+ int data_type; /* best guess about the data type: binary or text */
uLong adler; /* adler32 value of the uncompressed data */
uLong reserved; /* reserved for future use */
} z_stream;
@@ -105,45 +106,68 @@ typedef struct z_stream_s {
typedef z_stream FAR *z_streamp;
/*
- The application must update next_in and avail_in when avail_in has
- dropped to zero. It must update next_out and avail_out when avail_out
- has dropped to zero. The application must initialize zalloc, zfree and
- opaque before calling the init function. All other fields are set by the
- compression library and must not be updated by the application.
+ gzip header information passed to and from zlib routines. See RFC 1952
+ for more details on the meanings of these fields.
+*/
+typedef struct gz_header_s {
+ int text; /* true if compressed data believed to be text */
+ uLong time; /* modification time */
+ int xflags; /* extra flags (not used when writing a gzip file) */
+ int os; /* operating system */
+ Bytef *extra; /* pointer to extra field or Z_NULL if none */
+ uInt extra_len; /* extra field length (valid if extra != Z_NULL) */
+ uInt extra_max; /* space at extra (only when reading header) */
+ Bytef *name; /* pointer to zero-terminated file name or Z_NULL */
+ uInt name_max; /* space at name (only when reading header) */
+ Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */
+ uInt comm_max; /* space at comment (only when reading header) */
+ int hcrc; /* true if there was or will be a header crc */
+ int done; /* true when done reading gzip header (not used
+ when writing a gzip file) */
+} gz_header;
+
+typedef gz_header FAR *gz_headerp;
- The opaque value provided by the application will be passed as the first
- parameter for calls of zalloc and zfree. This can be useful for custom
- memory management. The compression library attaches no meaning to the
+/*
+ The application must update next_in and avail_in when avail_in has dropped
+ to zero. It must update next_out and avail_out when avail_out has dropped
+ to zero. The application must initialize zalloc, zfree and opaque before
+ calling the init function. All other fields are set by the compression
+ library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
opaque value.
- zalloc must return Z_NULL if there is not enough memory for the object.
+ zalloc must return Z_NULL if there is not enough memory for the object.
If zlib is used in a multi-threaded application, zalloc and zfree must be
thread safe.
- On 16-bit systems, the functions zalloc and zfree must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by zalloc for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-
- The fields total_in and total_out can be used for statistics or
- progress reports. After compression, total_in holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step).
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this if
+ the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers
+ returned by zalloc for objects of exactly 65536 bytes *must* have their
+ offset normalized to zero. The default allocation function provided by this
+ library ensures this (see zutil.c). To reduce memory requirements and avoid
+ any allocation of 64K objects, at the expense of compression ratio, compile
+ the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or progress
+ reports. After compression, total_in holds the total size of the
+ uncompressed data and may be saved for use in the decompressor (particularly
+ if the decompressor wants to decompress everything in a single step).
*/
/* constants */
#define Z_NO_FLUSH 0
-#define Z_PARTIAL_FLUSH 1 /* will be removed, use Z_SYNC_FLUSH instead */
+#define Z_PARTIAL_FLUSH 1
#define Z_SYNC_FLUSH 2
#define Z_FULL_FLUSH 3
#define Z_FINISH 4
#define Z_BLOCK 5
+#define Z_TREES 6
/* Allowed flush values; see deflate() and inflate() below for details */
#define Z_OK 0
@@ -155,8 +179,8 @@ typedef z_stream FAR *z_streamp;
#define Z_MEM_ERROR (-4)
#define Z_BUF_ERROR (-5)
#define Z_VERSION_ERROR (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
+/* Return codes for the compression/decompression functions. Negative values
+ * are errors, positive values are used for special but normal events.
*/
#define Z_NO_COMPRESSION 0
@@ -168,11 +192,13 @@ typedef z_stream FAR *z_streamp;
#define Z_FILTERED 1
#define Z_HUFFMAN_ONLY 2
#define Z_RLE 3
+#define Z_FIXED 4
#define Z_DEFAULT_STRATEGY 0
/* compression strategy; see deflateInit2() below for details */
#define Z_BINARY 0
-#define Z_ASCII 1
+#define Z_TEXT 1
+#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */
#define Z_UNKNOWN 2
/* Possible values of the data_type field (though see inflate()) */
@@ -184,115 +210,140 @@ typedef z_stream FAR *z_streamp;
#define zlib_version zlibVersion()
/* for compatibility with versions < 1.0.2 */
+
/* basic functions */
ZEXTERN const char * ZEXPORT zlibVersion OF((void));
/* The application can compare zlibVersion and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by deflateInit and inflateInit.
+ If the first character differs, the library code actually used is not
+ compatible with the zlib.h header file used by the application. This check
+ is automatically made by deflateInit and inflateInit.
*/
/*
ZEXTERN int ZEXPORT deflateInit OF((z_streamp strm, int level));
- Initializes the internal stream state for compression. The fields
- zalloc, zfree and opaque must be initialized before by the caller.
- If zalloc and zfree are set to Z_NULL, deflateInit updates them to
- use default allocation functions.
+ Initializes the internal stream state for compression. The fields
+ zalloc, zfree and opaque must be initialized before by the caller. If
+ zalloc and zfree are set to Z_NULL, deflateInit updates them to use default
+ allocation functions.
The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- Z_DEFAULT_COMPRESSION requests a default compromise between speed and
- compression (currently equivalent to level 6).
+ 1 gives best speed, 9 gives best compression, 0 gives no compression at all
+ (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION
+ requests a default compromise between speed and compression (currently
+ equivalent to level 6).
- deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
- enough memory, Z_STREAM_ERROR if level is not a valid compression level,
+ deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if level is not a valid compression level, or
Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- msg is set to null if there is no error message. deflateInit does not
- perform any compression: this will be done by deflate().
+ with the version assumed by the caller (ZLIB_VERSION). msg is set to null
+ if there is no error message. deflateInit does not perform any compression:
+ this will be done by deflate().
*/
ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
/*
deflate compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
+ buffer becomes empty or the output buffer becomes full. It may introduce
+ some output latency (reading input without producing any output) except when
forced to flush.
- The detailed semantics are as follows. deflate performs one or both of the
+ The detailed semantics are as follows. deflate performs one or both of the
following actions:
- Compress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
+ accordingly. If not all input can be processed (because there is not
enough room in the output buffer), next_in and avail_in are updated and
processing will resume at this point for the next call of deflate().
- Provide more output starting at next_out and update next_out and avail_out
- accordingly. This action is forced if the parameter flush is non zero.
+ accordingly. This action is forced if the parameter flush is non zero.
Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
-
- Before the call of deflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating avail_in or avail_out accordingly; avail_out
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (avail_out == 0), or after each call of deflate(). If deflate returns Z_OK
- and with zero avail_out, it must be called again after making room in the
- output buffer because there might be more output pending.
+ should be set only when necessary (in interactive applications). Some
+ output may be provided even if flush is not set.
+
+ Before the call of deflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating avail_in or avail_out accordingly; avail_out should
+ never be zero before the call. The application can consume the compressed
+ output when it wants, for example when the output buffer is full (avail_out
+ == 0), or after each call of deflate(). If deflate returns Z_OK and with
+ zero avail_out, it must be called again after making room in the output
+ buffer because there might be more output pending.
+
+ Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to
+ decide how much data to accumulate before producing output, in order to
+ maximize compression.
If the parameter flush is set to Z_SYNC_FLUSH, all pending output is
flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- avail_in is zero after the call if enough output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
+ that the decompressor can get all input data available so far. (In
+ particular avail_in is zero after the call if enough output space has been
+ provided before the call.) Flushing may degrade compression for some
+ compression algorithms and so it should be used only when necessary. This
+ completes the current deflate block and follows it with an empty stored block
+ that is three bits plus filler bits to the next byte, followed by four bytes
+ (00 00 ff ff).
+
+ If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the
+ output buffer, but the output is not aligned to a byte boundary. All of the
+ input data so far will be available to the decompressor, as for Z_SYNC_FLUSH.
+ This completes the current deflate block and follows it with an empty fixed
+ codes block that is 10 bits long. This assures that enough bytes are output
+ in order for the decompressor to finish the block before the empty fixed code
+ block.
+
+ If flush is set to Z_BLOCK, a deflate block is completed and emitted, as
+ for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to
+ seven bits of the current block are held to be written as the next byte after
+ the next deflate block is completed. In this case, the decompressor may not
+ be provided enough bits at this point in order to complete decompression of
+ the data provided so far to the compressor. It may need to wait for the next
+ block to be emitted. This is for advanced applications that need to control
+ the emission of deflate blocks.
If flush is set to Z_FULL_FLUSH, all output is flushed as with
Z_SYNC_FLUSH, and the compression state is reset so that decompression can
restart from this point if previous compressed data has been damaged or if
- random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
- the compression.
+ random access is desired. Using Z_FULL_FLUSH too often can seriously degrade
+ compression.
If deflate returns with avail_out == 0, this function must be called again
with the same value of the flush parameter and more output space (updated
avail_out), until the flush is complete (deflate returns with non-zero
- avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
+ avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that
avail_out is greater than six to avoid repeated flush markers due to
avail_out == 0 on return.
If the parameter flush is set to Z_FINISH, pending input is processed,
- pending output is flushed and deflate returns with Z_STREAM_END if there
- was enough output space; if deflate returns with Z_OK, this function must be
+ pending output is flushed and deflate returns with Z_STREAM_END if there was
+ enough output space; if deflate returns with Z_OK, this function must be
called again with Z_FINISH and more output space (updated avail_out) but no
- more input data, until it returns with Z_STREAM_END or an error. After
- deflate has returned Z_STREAM_END, the only possible operations on the
- stream are deflateReset or deflateEnd.
+ more input data, until it returns with Z_STREAM_END or an error. After
+ deflate has returned Z_STREAM_END, the only possible operations on the stream
+ are deflateReset or deflateEnd.
Z_FINISH can be used immediately after deflateInit if all the compression
- is to be done in a single step. In this case, avail_out must be at least
- the value returned by deflateBound (see below). If deflate does not return
+ is to be done in a single step. In this case, avail_out must be at least the
+ value returned by deflateBound (see below). If deflate does not return
Z_STREAM_END, then it must be called again as described above.
deflate() sets strm->adler to the adler32 checksum of all input read
so far (that is, total_in bytes).
- deflate() may update data_type if it can make a good guess about
- the input data type (Z_ASCII or Z_BINARY). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
+ deflate() may update strm->data_type if it can make a good guess about
+ the input data type (Z_BINARY or Z_TEXT). In doubt, the data is considered
+ binary. This field is only for information purposes and does not affect the
+ compression algorithm in any manner.
deflate() returns Z_OK if some progress has been made (more input
processed or more output produced), Z_STREAM_END if all input has been
consumed and all output has been produced (only when flush is set to
Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example
- if next_in or next_out was NULL), Z_BUF_ERROR if no progress is possible
- (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
+ if next_in or next_out was Z_NULL), Z_BUF_ERROR if no progress is possible
+ (for example avail_in or avail_out was zero). Note that Z_BUF_ERROR is not
fatal, and deflate() can be called again with more input and more output
space to continue compressing.
*/
@@ -301,13 +352,13 @@ ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
/*
All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
+ This function discards any unprocessed input and does not flush any pending
+ output.
deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the
stream state was inconsistent, Z_DATA_ERROR if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- msg may be set but then points to a static string (which must not be
+ prematurely (some input or output was discarded). In the error case, msg
+ may be set but then points to a static string (which must not be
deallocated).
*/
@@ -315,10 +366,10 @@ ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
/*
ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
- Initializes the internal stream state for decompression. The fields
+ Initializes the internal stream state for decompression. The fields
next_in, avail_in, zalloc, zfree and opaque must be initialized before by
- the caller. If next_in is not Z_NULL and avail_in is large enough (the exact
- value depends on the compression method), inflateInit determines the
+ the caller. If next_in is not Z_NULL and avail_in is large enough (the
+ exact value depends on the compression method), inflateInit determines the
compression method from the zlib header and allocates all data structures
accordingly; otherwise the allocation will be deferred to the first call of
inflate. If zalloc and zfree are set to Z_NULL, inflateInit updates them to
@@ -326,95 +377,108 @@ ZEXTERN int ZEXPORT inflateInit OF((z_streamp strm));
inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
- version assumed by the caller. msg is set to null if there is no error
- message. inflateInit does not perform any decompression apart from reading
- the zlib header if present: this will be done by inflate(). (So next_in and
- avail_in may be modified, but next_out and avail_out are unchanged.)
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit() does not process any header information -- that is deferred
+ until inflate() is called.
*/
ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
/*
inflate decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce
+ buffer becomes empty or the output buffer becomes full. It may introduce
some output latency (reading input without producing any output) except when
forced to flush.
- The detailed semantics are as follows. inflate performs one or both of the
+ The detailed semantics are as follows. inflate performs one or both of the
following actions:
- Decompress more input starting at next_in and update next_in and avail_in
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), next_in is updated and processing
- will resume at this point for the next call of inflate().
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing will
+ resume at this point for the next call of inflate().
- Provide more output starting at next_out and update next_out and avail_out
- accordingly. inflate() provides as much output as possible, until there
- is no more input data or no more space in the output buffer (see below
- about the flush parameter).
-
- Before the call of inflate(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (avail_out == 0), or after each
- call of inflate(). If inflate returns Z_OK and with zero avail_out, it
- must be called again after making room in the output buffer because there
- might be more output pending.
-
- The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH,
- Z_FINISH, or Z_BLOCK. Z_SYNC_FLUSH requests that inflate() flush as much
- output as possible to the output buffer. Z_BLOCK requests that inflate() stop
- if and when it get to the next deflate block boundary. When decoding the zlib
- or gzip format, this will cause inflate() to return immediately after the
- header and before the first block. When doing a raw inflate, inflate() will
- go ahead and process the first block, and will return when it gets to the end
- of that block, or when it runs out of data.
+ accordingly. inflate() provides as much output as possible, until there is
+ no more input data or no more space in the output buffer (see below about
+ the flush parameter).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming more
+ output, and updating the next_* and avail_* values accordingly. The
+ application can consume the uncompressed output when it wants, for example
+ when the output buffer is full (avail_out == 0), or after each call of
+ inflate(). If inflate returns Z_OK and with zero avail_out, it must be
+ called again after making room in the output buffer because there might be
+ more output pending.
+
+ The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH,
+ Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much
+ output as possible to the output buffer. Z_BLOCK requests that inflate()
+ stop if and when it gets to the next deflate block boundary. When decoding
+ the zlib or gzip format, this will cause inflate() to return immediately
+ after the header and before the first block. When doing a raw inflate,
+ inflate() will go ahead and process the first block, and will return when it
+ gets to the end of that block, or when it runs out of data.
The Z_BLOCK option assists in appending to or combining deflate streams.
Also to assist in this, on return inflate() will set strm->data_type to the
- number of unused bits in the last byte taken from strm->next_in, plus 64
- if inflate() is currently decoding the last block in the deflate stream,
- plus 128 if inflate() returned immediately after decoding an end-of-block
- code or decoding the complete header up to just before the first byte of the
- deflate stream. The end-of-block will not be indicated until all of the
- uncompressed data from that block has been written to strm->next_out. The
- number of unused bits may in general be greater than seven, except when
- bit 7 of data_type is set, in which case the number of unused bits will be
- less than eight.
+ number of unused bits in the last byte taken from strm->next_in, plus 64 if
+ inflate() is currently decoding the last block in the deflate stream, plus
+ 128 if inflate() returned immediately after decoding an end-of-block code or
+ decoding the complete header up to just before the first byte of the deflate
+ stream. The end-of-block will not be indicated until all of the uncompressed
+ data from that block has been written to strm->next_out. The number of
+ unused bits may in general be greater than seven, except when bit 7 of
+ data_type is set, in which case the number of unused bits will be less than
+ eight. data_type is set as noted here every time inflate() returns for all
+ flush options, and so can be used to determine the amount of currently
+ consumed input in bits.
+
+ The Z_TREES option behaves as Z_BLOCK does, but it also returns when the
+ end of each deflate block header is reached, before any actual data in that
+ block is decoded. This allows the caller to determine the length of the
+ deflate block header for later use in random access within a deflate block.
+ 256 is added to the value of strm->data_type when inflate() returns
+ immediately after reaching the end of the deflate block header.
inflate() should normally be called until it returns Z_STREAM_END or an
- error. However if all decompression is to be performed in a single step
- (a single call of inflate), the parameter flush should be set to
- Z_FINISH. In this case all pending input is processed and all pending
- output is flushed; avail_out must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be inflateEnd to deallocate the decompression state. The use of Z_FINISH
- is never required, but can be used to inform inflate that a faster approach
- may be used for the single inflate() call.
+ error. However if all decompression is to be performed in a single step (a
+ single call of inflate), the parameter flush should be set to Z_FINISH. In
+ this case all pending input is processed and all pending output is flushed;
+ avail_out must be large enough to hold all the uncompressed data. (The size
+ of the uncompressed data may have been saved by the compressor for this
+ purpose.) The next operation on this stream must be inflateEnd to deallocate
+ the decompression state. The use of Z_FINISH is never required, but can be
+ used to inform inflate that a faster approach may be used for the single
+ inflate() call.
In this implementation, inflate() always flushes as much output as
possible to the output buffer, and always uses the faster approach on the
- first call. So the only effect of the flush parameter in this implementation
+ first call. So the only effect of the flush parameter in this implementation
is on the return value of inflate(), as noted below, or when it returns early
- because Z_BLOCK is used.
+ because Z_BLOCK or Z_TREES is used.
If a preset dictionary is needed after this call (see inflateSetDictionary
- below), inflate sets strm-adler to the adler32 checksum of the dictionary
+ below), inflate sets strm->adler to the adler32 checksum of the dictionary
chosen by the compressor and returns Z_NEED_DICT; otherwise it sets
strm->adler to the adler32 checksum of all output produced so far (that is,
total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described
- below. At the end of the stream, inflate() checks that its computed adler32
+ below. At the end of the stream, inflate() checks that its computed adler32
checksum is equal to that saved by the compressor and returns Z_STREAM_END
only if the checksum is correct.
- inflate() will decompress and check either zlib-wrapped or gzip-wrapped
- deflate data. The header type is detected automatically. Any information
- contained in the gzip header is not retained, so applications that need that
- information should instead use raw inflate, see inflateInit2() below, or
- inflateBack() and perform their own processing of the gzip header and
- trailer.
+ inflate() can decompress and check either zlib-wrapped or gzip-wrapped
+ deflate data. The header type is detected automatically, if requested when
+ initializing with inflateInit2(). Any information contained in the gzip
+ header is not retained, so applications that need that information should
+ instead use raw inflate, see inflateInit2() below, or inflateBack() and
+ perform their own processing of the gzip header and trailer.
inflate() returns Z_OK if some progress has been made (more input processed
or more output produced), Z_STREAM_END if the end of the compressed data has
@@ -422,27 +486,28 @@ ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
preset dictionary is needed at this point, Z_DATA_ERROR if the input data was
corrupted (input stream not conforming to the zlib format or incorrect check
value), Z_STREAM_ERROR if the stream structure was inconsistent (for example
- if next_in or next_out was NULL), Z_MEM_ERROR if there was not enough memory,
+ next_in or next_out was Z_NULL), Z_MEM_ERROR if there was not enough memory,
Z_BUF_ERROR if no progress is possible or if there was not enough room in the
- output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
+ output buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and
inflate() can be called again with more input and more output space to
- continue decompressing. If Z_DATA_ERROR is returned, the application may then
- call inflateSync() to look for a good compression block if a partial recovery
- of the data is desired.
+ continue decompressing. If Z_DATA_ERROR is returned, the application may
+ then call inflateSync() to look for a good compression block if a partial
+ recovery of the data is desired.
*/
ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
/*
All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
+ This function discards any unprocessed input and does not flush any pending
+ output.
inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
- was inconsistent. In the error case, msg may be set but then points to a
+ was inconsistent. In the error case, msg may be set but then points to a
static string (which must not be deallocated).
*/
+
/* Advanced functions */
/*
@@ -457,52 +522,57 @@ ZEXTERN int ZEXPORT deflateInit2 OF((z_streamp strm,
int memLevel,
int strategy));
- This is another version of deflateInit with more compression options. The
- fields next_in, zalloc, zfree and opaque must be initialized before by
- the caller.
+ This is another version of deflateInit with more compression options. The
+ fields next_in, zalloc, zfree and opaque must be initialized before by the
+ caller.
- The method parameter is the compression method. It must be Z_DEFLATED in
+ The method parameter is the compression method. It must be Z_DEFLATED in
this version of the library.
The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
+ (the size of the history buffer). It should be in the range 8..15 for this
+ version of the library. Larger values of this parameter result in better
+ compression at the expense of memory usage. The default value is 15 if
deflateInit is used instead.
- windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
- determines the window size. deflate() will then generate raw deflate data
+ windowBits can also be -8..-15 for raw deflate. In this case, -windowBits
+ determines the window size. deflate() will then generate raw deflate data
with no zlib header or trailer, and will not compute an adler32 check value.
- windowBits can also be greater than 15 for optional gzip encoding. Add
+ windowBits can also be greater than 15 for optional gzip encoding. Add
16 to windowBits to write a simple gzip header and trailer around the
- compressed data instead of a zlib wrapper. The gzip header will have no
- file name, no extra data, no comment, no modification time (set to zero),
- no header crc, and the operating system will be set to 255 (unknown).
+ compressed data instead of a zlib wrapper. The gzip header will have no
+ file name, no extra data, no comment, no modification time (set to zero), no
+ header crc, and the operating system will be set to 255 (unknown). If a
+ gzip stream is being written, strm->adler is a crc32 instead of an adler32.
The memLevel parameter specifies how much memory should be allocated
- for the internal compression state. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.
+ for the internal compression state. memLevel=1 uses minimum memory but is
+ slow and reduces compression ratio; memLevel=9 uses maximum memory for
+ optimal speed. The default value is 8. See zconf.h for total memory usage
+ as a function of windowBits and memLevel.
- The strategy parameter is used to tune the compression algorithm. Use the
+ The strategy parameter is used to tune the compression algorithm. Use the
value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a
filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no
string match), or Z_RLE to limit match distances to one (run-length
- encoding). Filtered data consists mostly of small values with a somewhat
- random distribution. In this case, the compression algorithm is tuned to
- compress them better. The effect of Z_FILTERED is to force more Huffman
+ encoding). Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is tuned to
+ compress them better. The effect of Z_FILTERED is to force more Huffman
coding and less string matching; it is somewhat intermediate between
- Z_DEFAULT and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as fast as
- Z_HUFFMAN_ONLY, but give better compression for PNG image data. The strategy
- parameter only affects the compression ratio but not the correctness of the
- compressed output even if it is not set appropriately.
-
- deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as an invalid
- method). msg is set to null if there is no error message. deflateInit2 does
- not perform any compression: this will be done by deflate().
+ Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as
+ fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The
+ strategy parameter only affects the compression ratio but not the
+ correctness of the compressed output even if it is not set appropriately.
+ Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler
+ decoder for special applications.
+
+ deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
+ memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid
+ method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is
+ incompatible with the version assumed by the caller (ZLIB_VERSION). msg is
+ set to null if there is no error message. deflateInit2 does not perform any
+ compression: this will be done by deflate().
*/
ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
@@ -510,35 +580,37 @@ ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
uInt dictLength));
/*
Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after deflateInit, deflateInit2 or deflateReset, before any
- call of deflate. The compressor and decompressor must use exactly the same
+ without producing any compressed output. This function must be called
+ immediately after deflateInit, deflateInit2 or deflateReset, before any call
+ of deflate. The compressor and decompressor must use exactly the same
dictionary (see inflateSetDictionary).
The dictionary should consist of strings (byte sequences) that are likely
to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
+ used strings preferably put towards the end of the dictionary. Using a
dictionary is most useful when the data to be compressed is short and can be
predicted with good accuracy; the data can then be compressed better than
with the default empty dictionary.
Depending on the size of the compression data structures selected by
deflateInit or deflateInit2, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size in
- deflate or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front.
+ discarded, for example if the dictionary is larger than the window size
+ provided in deflateInit or deflateInit2. Thus the strings most likely to be
+ useful should be put at the end of the dictionary, not at the front. In
+ addition, the current implementation of deflate will use at most the window
+ size minus 262 bytes of the provided dictionary.
Upon return of this function, strm->adler is set to the adler32 value
of the dictionary; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The adler32 value
+ which dictionary has been used by the compressor. (The adler32 value
applies to the whole dictionary even if only a subset of the dictionary is
actually used by the compressor.) If a raw deflate was requested, then the
adler32 value is not computed and strm->adler is not set.
deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
inconsistent (for example if deflate has already been called for this stream
- or if the compression method is bsort). deflateSetDictionary does not
+ or if the compression method is bsort). deflateSetDictionary does not
perform any compression: this will be done by deflate().
*/
@@ -549,26 +621,26 @@ ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
This function can be useful when several compression strategies will be
tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
+ data with a filter. The streams that will be discarded should then be freed
by calling deflateEnd. Note that deflateCopy duplicates the internal
- compression state which can be quite large, so this strategy is slow and
- can consume lots of memory.
+ compression state which can be quite large, so this strategy is slow and can
+ consume lots of memory.
deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
destination.
*/
ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
/*
This function is equivalent to deflateEnd followed by deflateInit,
- but does not free and reallocate all the internal compression state.
- The stream will keep the same compression level and any other attributes
- that may have been set by deflateInit2.
+ but does not free and reallocate all the internal compression state. The
+ stream will keep the same compression level and any other attributes that
+ may have been set by deflateInit2.
- deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
+ deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
*/
ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
@@ -578,27 +650,45 @@ ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
Dynamically update the compression level and compression strategy. The
interpretation of level and strategy is as in deflateInit2. This can be
used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of deflate().
+ to switch to a different kind of input data requiring a different strategy.
+ If the compression level is changed, the input available so far is
+ compressed with the old level (and may be flushed); the new level will take
+ effect only at the next call of deflate().
Before the call of deflateParams, the stream state must be set as for
- a call of deflate(), since the currently available input may have to
- be compressed and flushed. In particular, strm->avail_out must be non-zero.
+ a call of deflate(), since the currently available input may have to be
+ compressed and flushed. In particular, strm->avail_out must be non-zero.
deflateParams returns Z_OK if success, Z_STREAM_ERROR if the source
- stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR
- if strm->avail_out was zero.
+ stream state was inconsistent or if a parameter was invalid, Z_BUF_ERROR if
+ strm->avail_out was zero.
*/
+ZEXTERN int ZEXPORT deflateTune OF((z_streamp strm,
+ int good_length,
+ int max_lazy,
+ int nice_length,
+ int max_chain));
+/*
+ Fine tune deflate's internal compression parameters. This should only be
+ used by someone who understands the algorithm used by zlib's deflate for
+ searching for the best matching string, and even then only by the most
+ fanatic optimizer trying to squeeze out the last compressed bit for their
+ specific input data. Read the deflate.c source code for the meaning of the
+ max_lazy, good_length, nice_length, and max_chain parameters.
+
+ deflateTune() can be called after deflateInit() or deflateInit2(), and
+ returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream.
+ */
+
ZEXTERN uLong ZEXPORT deflateBound OF((z_streamp strm,
uLong sourceLen));
/*
deflateBound() returns an upper bound on the compressed size after
- deflation of sourceLen bytes. It must be called after deflateInit()
- or deflateInit2(). This would be used to allocate an output buffer
- for deflation in a single pass, and so would be called before deflate().
+ deflation of sourceLen bytes. It must be called after deflateInit() or
+ deflateInit2(), and after deflateSetHeader(), if used. This would be used
+ to allocate an output buffer for deflation in a single pass, and so would be
+ called before deflate().
*/
ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
@@ -606,14 +696,38 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
int value));
/*
deflatePrime() inserts bits in the deflate output stream. The intent
- is that this function is used to start off the deflate output with the
- bits leftover from a previous deflate stream when appending to it. As such,
- this function can only be used for raw deflate, and must be used before the
- first deflate() call after a deflateInit2() or deflateReset(). bits must be
- less than or equal to 16, and that many of the least significant bits of
- value will be inserted in the output.
-
- deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ is that this function is used to start off the deflate output with the bits
+ leftover from a previous deflate stream when appending to it. As such, this
+ function can only be used for raw deflate, and must be used before the first
+ deflate() call after a deflateInit2() or deflateReset(). bits must be less
+ than or equal to 16, and that many of the least significant bits of value
+ will be inserted in the output.
+
+ deflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT deflateSetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ deflateSetHeader() provides gzip header information for when a gzip
+ stream is requested by deflateInit2(). deflateSetHeader() may be called
+ after deflateInit2() or deflateReset() and before the first call of
+ deflate(). The text, time, os, extra field, name, and comment information
+ in the provided gz_header structure are written to the gzip header (xflag is
+ ignored -- the extra flags are set according to the compression level). The
+ caller must assure that, if not Z_NULL, name and comment are terminated with
+ a zero byte, and that if extra is not Z_NULL, that extra_len bytes are
+ available there. If hcrc is true, a gzip header crc is included. Note that
+ the current versions of the command-line version of gzip (up through version
+ 1.3.x) do not support header crc's, and will report that it is a "multi-part
+ gzip file" and give up.
+
+ If deflateSetHeader is not used, the default gzip header has text false,
+ the time set to zero, and os set to 255, with no extra, name, or comment
+ fields. The gzip header is returned to the default state by deflateReset().
+
+ deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
@@ -621,42 +735,50 @@ ZEXTERN int ZEXPORT deflatePrime OF((z_streamp strm,
ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
int windowBits));
- This is another version of inflateInit with an extra parameter. The
+ This is another version of inflateInit with an extra parameter. The
fields next_in, avail_in, zalloc, zfree and opaque must be initialized
before by the caller.
The windowBits parameter is the base two logarithm of the maximum window
size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if inflateInit is used
- instead. windowBits must be greater than or equal to the windowBits value
+ this version of the library. The default value is 15 if inflateInit is used
+ instead. windowBits must be greater than or equal to the windowBits value
provided to deflateInit2() while compressing, or it must be equal to 15 if
- deflateInit2() was not used. If a compressed stream with a larger window
+ deflateInit2() was not used. If a compressed stream with a larger window
size is given as input, inflate() will return with the error code
Z_DATA_ERROR instead of trying to allocate a larger window.
- windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
- determines the window size. inflate() will then process raw deflate data,
+ windowBits can also be zero to request that inflate use the window size in
+ the zlib header of the compressed stream.
+
+ windowBits can also be -8..-15 for raw inflate. In this case, -windowBits
+ determines the window size. inflate() will then process raw deflate data,
not looking for a zlib or gzip header, not generating a check value, and not
- looking for any check values for comparison at the end of the stream. This
+ looking for any check values for comparison at the end of the stream. This
is for use with other formats that use the deflate compressed data format
- such as zip. Those formats provide their own check values. If a custom
+ such as zip. Those formats provide their own check values. If a custom
format is developed using the raw deflate format for compressed data, it is
recommended that a check value such as an adler32 or a crc32 be applied to
the uncompressed data as is done in the zlib, gzip, and zip formats. For
- most applications, the zlib format should be used as is. Note that comments
+ most applications, the zlib format should be used as is. Note that comments
above on the use in deflateInit2() applies to the magnitude of windowBits.
- windowBits can also be greater than 15 for optional gzip decoding. Add
+ windowBits can also be greater than 15 for optional gzip decoding. Add
32 to windowBits to enable zlib and gzip decoding with automatic header
detection, or add 16 to decode only the gzip format (the zlib format will
- return a Z_DATA_ERROR).
+ return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a
+ crc32 instead of an adler32.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
- memLevel). msg is set to null if there is no error message. inflateInit2
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by inflate(). (So next_in and avail_in may be
- modified, but next_out and avail_out are unchanged.)
+ memory, Z_VERSION_ERROR if the zlib library version is incompatible with the
+ version assumed by the caller, or Z_STREAM_ERROR if the parameters are
+ invalid, such as a null pointer to the structure. msg is set to null if
+ there is no error message. inflateInit2 does not perform any decompression
+ apart from possibly reading the zlib header if present: actual decompression
+ will be done by inflate(). (So next_in and avail_in may be modified, but
+ next_out and avail_out are unused and unchanged.) The current implementation
+ of inflateInit2() does not process any header information -- that is
+ deferred until inflate() is called.
*/
ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
@@ -664,33 +786,36 @@ ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
uInt dictLength));
/*
Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of inflate
- if this call returned Z_NEED_DICT. The dictionary chosen by the compressor
- can be determined from the adler32 value returned by this call of
- inflate. The compressor and decompressor must use exactly the same
- dictionary (see deflateSetDictionary).
+ sequence. This function must be called immediately after a call of inflate,
+ if that call returned Z_NEED_DICT. The dictionary chosen by the compressor
+ can be determined from the adler32 value returned by that call of inflate.
+ The compressor and decompressor must use exactly the same dictionary (see
+ deflateSetDictionary). For raw inflate, this function can be called
+ immediately after inflateInit2() or inflateReset() and before any call of
+ inflate() to set the dictionary. The application must insure that the
+ dictionary that was used for compression is provided.
inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a
- parameter is invalid (such as NULL dictionary) or the stream state is
+ parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is
inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the
- expected one (incorrect adler32 value). inflateSetDictionary does not
+ expected one (incorrect adler32 value). inflateSetDictionary does not
perform any decompression: this will be done by subsequent calls of
inflate().
*/
ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
/*
- Skips invalid compressed data until a full flush point (see above the
- description of deflate with Z_FULL_FLUSH) can be found, or until all
- available input is skipped. No output is provided.
-
- inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
- if no more input was provided, Z_DATA_ERROR if no flush point has been found,
- or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
- case, the application may save the current current value of total_in which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call inflateSync, providing more input each time,
- until success or end of the input data.
+ Skips invalid compressed data until a full flush point (see above the
+ description of deflate with Z_FULL_FLUSH) can be found, or until all
+ available input is skipped. No output is provided.
+
+ inflateSync returns Z_OK if a full flush point has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no flush point has been
+ found, or Z_STREAM_ERROR if the stream structure was inconsistent. In the
+ success case, the application may save the current current value of total_in
+ which indicates where valid compressed data was found. In the error case,
+ the application may repeatedly call inflateSync, providing more input each
+ time, until success or end of the input data.
*/
ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
@@ -705,22 +830,123 @@ ZEXTERN int ZEXPORT inflateCopy OF((z_streamp dest,
inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_STREAM_ERROR if the source stream state was inconsistent
- (such as zalloc being NULL). msg is left unchanged in both source and
+ (such as zalloc being Z_NULL). msg is left unchanged in both source and
destination.
*/
ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
/*
This function is equivalent to inflateEnd followed by inflateInit,
- but does not free and reallocate all the internal decompression state.
- The stream will keep attributes that may have been set by inflateInit2.
+ but does not free and reallocate all the internal decompression state. The
+ stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL).
+*/
- inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
- stream state was inconsistent (such as zalloc or state being NULL).
+ZEXTERN int ZEXPORT inflateReset2 OF((z_streamp strm,
+ int windowBits));
+/*
+ This function is the same as inflateReset, but it also permits changing
+ the wrap and window size requests. The windowBits parameter is interpreted
+ the same as it is for inflateInit2.
+
+ inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being Z_NULL), or if
+ the windowBits parameter is invalid.
+*/
+
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ If bits is negative, then the input stream bit buffer is emptied. Then
+ inflatePrime() can be called again to put bits in the buffer. This is used
+ to clear out bits leftover after feeding inflate a block description prior
+ to feeding inflate codes.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
*/
+ZEXTERN long ZEXPORT inflateMark OF((z_streamp strm));
/*
-ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits,
+ This function returns two values, one in the lower 16 bits of the return
+ value, and the other in the remaining upper bits, obtained by shifting the
+ return value down 16 bits. If the upper value is -1 and the lower value is
+ zero, then inflate() is currently decoding information outside of a block.
+ If the upper value is -1 and the lower value is non-zero, then inflate is in
+ the middle of a stored block, with the lower value equaling the number of
+ bytes from the input remaining to copy. If the upper value is not -1, then
+ it is the number of bits back from the current bit position in the input of
+ the code (literal or length/distance pair) currently being processed. In
+ that case the lower value is the number of bytes already emitted for that
+ code.
+
+ A code is being processed if inflate is waiting for more input to complete
+ decoding of the code, or if it has completed decoding but is waiting for
+ more output space to write the literal or match data.
+
+ inflateMark() is used to mark locations in the input data for random
+ access, which may be at bit positions, and to note those cases where the
+ output of a code may span boundaries of random access blocks. The current
+ location in the input stream can be determined from avail_in and data_type
+ as noted in the description for the Z_BLOCK flush parameter for inflate.
+
+ inflateMark returns the value noted above or -1 << 16 if the provided
+ source stream state was inconsistent.
+*/
+
+ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
+ gz_headerp head));
+/*
+ inflateGetHeader() requests that gzip header information be stored in the
+ provided gz_header structure. inflateGetHeader() may be called after
+ inflateInit2() or inflateReset(), and before the first call of inflate().
+ As inflate() processes the gzip stream, head->done is zero until the header
+ is completed, at which time head->done is set to one. If a zlib stream is
+ being decoded, then head->done is set to -1 to indicate that there will be
+ no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be
+ used to force inflate() to return immediately after header processing is
+ complete and before any actual data is decompressed.
+
+ The text, time, xflags, and os fields are filled in with the gzip header
+ contents. hcrc is set to true if there is a header CRC. (The header CRC
+ was valid if done is set to one.) If extra is not Z_NULL, then extra_max
+ contains the maximum number of bytes to write to extra. Once done is true,
+ extra_len contains the actual extra field length, and extra contains the
+ extra field, or that field truncated if extra_max is less than extra_len.
+ If name is not Z_NULL, then up to name_max characters are written there,
+ terminated with a zero unless the length is greater than name_max. If
+ comment is not Z_NULL, then up to comm_max characters are written there,
+ terminated with a zero unless the length is greater than comm_max. When any
+ of extra, name, or comment are not Z_NULL and the respective field is not
+ present in the header, then that field is set to Z_NULL to signal its
+ absence. This allows the use of deflateSetHeader() with the returned
+ structure to duplicate the header. However if those fields are set to
+ allocated memory, then the application will need to save those pointers
+ elsewhere so that they can be eventually freed.
+
+ If inflateGetHeader is not used, then the header information is simply
+ discarded. The header is always checked for validity, including the header
+ CRC if present. inflateReset() will reset the process to discard the header
+ information. The application would need to call inflateGetHeader() again to
+ retrieve the header from the next gzip stream.
+
+ inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
+/*
+ZEXTERN int ZEXPORT inflateBackInit OF((z_streamp strm, int windowBits,
unsigned char FAR *window));
Initialize the internal stream state for decompression using inflateBack()
@@ -736,15 +962,15 @@ ZEXTERN int ZEXPORT inflateBackInit OF((z_stream FAR *strm, int windowBits,
See inflateBack() for the usage of these routines.
inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of
- the paramaters are invalid, Z_MEM_ERROR if the internal state could not
- be allocated, or Z_VERSION_ERROR if the version of the library does not
- match the version of the header file.
+ the paramaters are invalid, Z_MEM_ERROR if the internal state could not be
+ allocated, or Z_VERSION_ERROR if the version of the library does not match
+ the version of the header file.
*/
typedef unsigned (*in_func) OF((void FAR *, unsigned char FAR * FAR *));
typedef int (*out_func) OF((void FAR *, unsigned char FAR *, unsigned));
-ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
+ZEXTERN int ZEXPORT inflateBack OF((z_streamp strm,
in_func in, void FAR *in_desc,
out_func out, void FAR *out_desc));
/*
@@ -758,15 +984,15 @@ ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
inflateBackInit() must be called first to allocate the internal state
and to initialize the state with the user-provided window buffer.
inflateBack() may then be used multiple times to inflate a complete, raw
- deflate stream with each call. inflateBackEnd() is then called to free
- the allocated state.
+ deflate stream with each call. inflateBackEnd() is then called to free the
+ allocated state.
A raw deflate stream is one with no zlib or gzip header or trailer.
This routine would normally be used in a utility that reads zip or gzip
files and writes out uncompressed files. The utility would decode the
- header and process the trailer on its own, hence this routine expects
- only the raw deflate stream to decompress. This is different from the
- normal behavior of inflate(), which expects either a zlib or gzip header and
+ header and process the trailer on its own, hence this routine expects only
+ the raw deflate stream to decompress. This is different from the normal
+ behavior of inflate(), which expects either a zlib or gzip header and
trailer around the deflate stream.
inflateBack() uses two subroutines supplied by the caller that are then
@@ -792,7 +1018,7 @@ ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called
immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in
must also be initialized, and then if strm->avail_in is not zero, input will
- initially be taken from strm->next_in[0 .. strm->avail_in - 1].
+ initially be taken from strm->next_in[0 .. strm->avail_in - 1].
The in_desc and out_desc parameters of inflateBack() is passed as the
first parameter of in() and out() respectively when they are called. These
@@ -802,18 +1028,18 @@ ZEXTERN int ZEXPORT inflateBack OF((z_stream FAR *strm,
On return, inflateBack() will set strm->next_in and strm->avail_in to
pass back any unused input that was provided by the last in() call. The
return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR
- if in() or out() returned an error, Z_DATA_ERROR if there was a format
- error in the deflate stream (in which case strm->msg is set to indicate the
- nature of the error), or Z_STREAM_ERROR if the stream was not properly
- initialized. In the case of Z_BUF_ERROR, an input or output error can be
- distinguished using strm->next_in which will be Z_NULL only if in() returned
- an error. If strm->next is not Z_NULL, then the Z_BUF_ERROR was due to
- out() returning non-zero. (in() will always be called before out(), so
- strm->next_in is assured to be defined if out() returns non-zero.) Note
- that inflateBack() cannot return Z_OK.
+ if in() or out() returned an error, Z_DATA_ERROR if there was a format error
+ in the deflate stream (in which case strm->msg is set to indicate the nature
+ of the error), or Z_STREAM_ERROR if the stream was not properly initialized.
+ In the case of Z_BUF_ERROR, an input or output error can be distinguished
+ using strm->next_in which will be Z_NULL only if in() returned an error. If
+ strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning
+ non-zero. (in() will always be called before out(), so strm->next_in is
+ assured to be defined if out() returns non-zero.) Note that inflateBack()
+ cannot return Z_OK.
*/
-ZEXTERN int ZEXPORT inflateBackEnd OF((z_stream FAR *strm));
+ZEXTERN int ZEXPORT inflateBackEnd OF((z_streamp strm));
/*
All memory allocated by inflateBackInit() is freed.
@@ -866,23 +1092,22 @@ ZEXTERN uLong ZEXPORT zlibCompileFlags OF((void));
/* utility functions */
/*
- The following utility functions are implemented on top of the
- basic stream-oriented functions. To simplify the interface, some
- default options are assumed (compression level and memory usage,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
+ The following utility functions are implemented on top of the basic
+ stream-oriented functions. To simplify the interface, some default options
+ are assumed (compression level and memory usage, standard memory allocation
+ functions). The source code of these utility functions can be modified if
+ you need special options.
*/
ZEXTERN int ZEXPORT compress OF((Bytef *dest, uLongf *destLen,
const Bytef *source, uLong sourceLen));
/*
Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least the value returned
- by compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be at least the value returned by
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
compressed buffer.
- This function can be used to compress a whole file at once if the
- input file is mmap'ed.
+
compress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
buffer.
@@ -892,11 +1117,11 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
const Bytef *source, uLong sourceLen,
int level));
/*
- Compresses the source buffer into the destination buffer. The level
+ Compresses the source buffer into the destination buffer. The level
parameter has the same meaning as in deflateInit. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
+ length of the source buffer. Upon entry, destLen is the total size of the
destination buffer, which must be at least the value returned by
- compressBound(sourceLen). Upon exit, destLen is the actual size of the
+ compressBound(sourceLen). Upon exit, destLen is the actual size of the
compressed buffer.
compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
@@ -907,22 +1132,20 @@ ZEXTERN int ZEXPORT compress2 OF((Bytef *dest, uLongf *destLen,
ZEXTERN uLong ZEXPORT compressBound OF((uLong sourceLen));
/*
compressBound() returns an upper bound on the compressed size after
- compress() or compress2() on sourceLen bytes. It would be used before
- a compress() or compress2() call to allocate the destination buffer.
+ compress() or compress2() on sourceLen bytes. It would be used before a
+ compress() or compress2() call to allocate the destination buffer.
*/
ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
const Bytef *source, uLong sourceLen));
/*
Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
+ the byte length of the source buffer. Upon entry, destLen is the total size
+ of the destination buffer, which must be large enough to hold the entire
+ uncompressed data. (The size of the uncompressed data must have been saved
+ previously by the compressor and transmitted to the decompressor by some
+ mechanism outside the scope of this compression library.) Upon exit, destLen
+ is the actual size of the uncompressed buffer.
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
@@ -930,136 +1153,199 @@ ZEXTERN int ZEXPORT uncompress OF((Bytef *dest, uLongf *destLen,
*/
-typedef voidp gzFile;
+ /* gzip file access functions */
+
+/*
+ This library supports reading and writing files in gzip (.gz) format with
+ an interface similar to that of stdio, using the functions that start with
+ "gz". The gzip format is different from the zlib format. gzip is a gzip
+ wrapper, documented in RFC 1952, wrapped around a deflate stream.
+*/
+
+typedef voidp gzFile; /* opaque gzip file descriptor */
-ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
/*
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
- Huffman only compression as in "wb1h", or 'R' for run-length encoding
- as in "wb1R". (See the description of deflateInit2 for more information
- about the strategy parameter.)
+ZEXTERN gzFile ZEXPORT gzopen OF((const char *path, const char *mode));
+
+ Opens a gzip (.gz) file for reading or writing. The mode parameter is as
+ in fopen ("rb" or "wb") but can also include a compression level ("wb9") or
+ a strategy: 'f' for filtered data as in "wb6f", 'h' for Huffman-only
+ compression as in "wb1h", 'R' for run-length encoding as in "wb1R", or 'F'
+ for fixed code compression as in "wb9F". (See the description of
+ deflateInit2 for more information about the strategy parameter.) Also "a"
+ can be used instead of "w" to request that the gzip stream that will be
+ written be appended to the file. "+" will result in an error, since reading
+ and writing to the same gzip file is not supported.
gzopen can be used to read a file which is not in gzip format; in this
case gzread will directly read from the file without decompression.
- gzopen returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression state; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is Z_MEM_ERROR). */
+ gzopen returns NULL if the file could not be opened, if there was
+ insufficient memory to allocate the gzFile state, or if an invalid mode was
+ specified (an 'r', 'w', or 'a' was not provided, or '+' was provided).
+ errno can be checked to determine if the reason gzopen failed was that the
+ file could not be opened.
+*/
+
+ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+/*
+ gzdopen associates a gzFile with the file descriptor fd. File descriptors
+ are obtained from calls like open, dup, creat, pipe or fileno (if the file
+ has been previously opened with fopen). The mode parameter is as in gzopen.
+
+ The next call of gzclose on the returned gzFile will also close the file
+ descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor
+ fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd,
+ mode);. The duplicated descriptor should be saved to avoid a leak, since
+ gzdopen does not close fd if it fails.
+
+ gzdopen returns NULL if there was insufficient memory to allocate the
+ gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not
+ provided, or '+' was provided), or if fd is -1. The file descriptor is not
+ used until the next gz* read, write, seek, or close operation, so gzdopen
+ will not detect if fd is invalid (unless fd is -1).
+*/
-ZEXTERN gzFile ZEXPORT gzdopen OF((int fd, const char *mode));
+ZEXTERN int ZEXPORT gzbuffer OF((gzFile file, unsigned size));
/*
- gzdopen() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in gzopen.
- The next call of gzclose on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use gzdopen(dup(fd), mode).
- gzdopen returns NULL if there was insufficient memory to allocate
- the (de)compression state.
+ Set the internal buffer size used by this library's functions. The
+ default buffer size is 8192 bytes. This function must be called after
+ gzopen() or gzdopen(), and before any other calls that read or write the
+ file. The buffer memory allocation is always deferred to the first read or
+ write. Two buffers are allocated, either both of the specified size when
+ writing, or one of the specified size and the other twice that size when
+ reading. A larger buffer size of, for example, 64K or 128K bytes will
+ noticeably increase the speed of decompression (reading).
+
+ The new buffer size also affects the maximum length for gzprintf().
+
+ gzbuffer() returns 0 on success, or -1 on failure, such as being called
+ too late.
*/
ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
/*
- Dynamically update the compression level or strategy. See the description
+ Dynamically update the compression level or strategy. See the description
of deflateInit2 for the meaning of these parameters.
+
gzsetparams returns Z_OK if success, or Z_STREAM_ERROR if the file was not
opened for writing.
*/
-ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
+ZEXTERN int ZEXPORT gzread OF((gzFile file, voidp buf, unsigned len));
/*
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, gzread copies the given number
- of bytes into the buffer.
- gzread returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error). */
+ Reads the given number of uncompressed bytes from the compressed file. If
+ the input file was not in gzip format, gzread copies the given number of
+ bytes into the buffer.
+
+ After reaching the end of a gzip stream in the input, gzread will continue
+ to read, looking for another gzip stream, or failing that, reading the rest
+ of the input file directly without decompression. The entire input file
+ will be read if gzread is called until it returns less than the requested
+ len.
+
+ gzread returns the number of uncompressed bytes actually read, less than
+ len for end of file, or -1 for error.
+*/
-ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
- voidpc buf, unsigned len));
+ZEXTERN int ZEXPORT gzwrite OF((gzFile file,
+ voidpc buf, unsigned len));
/*
Writes the given number of uncompressed bytes into the compressed file.
- gzwrite returns the number of uncompressed bytes actually written
- (0 in case of error).
+ gzwrite returns the number of uncompressed bytes written or 0 in case of
+ error.
*/
-ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
+ZEXTERN int ZEXPORTVA gzprintf OF((gzFile file, const char *format, ...));
/*
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. gzprintf returns the number of
- uncompressed bytes actually written (0 in case of error). The number of
- uncompressed bytes written is limited to 4095. The caller should assure that
- this limit is not exceeded. If it is exceeded, then gzprintf() will return
- return an error (0) with nothing written. In this case, there may also be a
- buffer overflow with unpredictable consequences, which is possible only if
- zlib was compiled with the insecure functions sprintf() or vsprintf()
- because the secure snprintf() or vsnprintf() functions were not available.
+ Converts, formats, and writes the arguments to the compressed file under
+ control of the format string, as in fprintf. gzprintf returns the number of
+ uncompressed bytes actually written, or 0 in case of error. The number of
+ uncompressed bytes written is limited to 8191, or one less than the buffer
+ size given to gzbuffer(). The caller should assure that this limit is not
+ exceeded. If it is exceeded, then gzprintf() will return an error (0) with
+ nothing written. In this case, there may also be a buffer overflow with
+ unpredictable consequences, which is possible only if zlib was compiled with
+ the insecure functions sprintf() or vsprintf() because the secure snprintf()
+ or vsnprintf() functions were not available. This can be determined using
+ zlibCompileFlags().
*/
ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
/*
- Writes the given null-terminated string to the compressed file, excluding
+ Writes the given null-terminated string to the compressed file, excluding
the terminating null character.
- gzputs returns the number of characters written, or -1 in case of error.
+
+ gzputs returns the number of characters written, or -1 in case of error.
*/
ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
/*
- Reads bytes from the compressed file until len-1 characters are read, or
- a newline character is read and transferred to buf, or an end-of-file
- condition is encountered. The string is then terminated with a null
- character.
- gzgets returns buf, or Z_NULL in case of error.
+ Reads bytes from the compressed file until len-1 characters are read, or a
+ newline character is read and transferred to buf, or an end-of-file
+ condition is encountered. If any characters are read or if len == 1, the
+ string is terminated with a null character. If no characters are read due
+ to an end-of-file or len < 1, then the buffer is left untouched.
+
+ gzgets returns buf which is a null-terminated string, or it returns NULL
+ for end-of-file or in case of error. If there was an error, the contents at
+ buf are indeterminate.
*/
-ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
+ZEXTERN int ZEXPORT gzputc OF((gzFile file, int c));
/*
- Writes c, converted to an unsigned char, into the compressed file.
- gzputc returns the value that was written, or -1 in case of error.
+ Writes c, converted to an unsigned char, into the compressed file. gzputc
+ returns the value that was written, or -1 in case of error.
*/
-ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
+ZEXTERN int ZEXPORT gzgetc OF((gzFile file));
/*
- Reads one byte from the compressed file. gzgetc returns this byte
- or -1 in case of end of file or error.
+ Reads one byte from the compressed file. gzgetc returns this byte or -1
+ in case of end of file or error.
*/
-ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
+ZEXTERN int ZEXPORT gzungetc OF((int c, gzFile file));
/*
- Push one character back onto the stream to be read again later.
- Only one character of push-back is allowed. gzungetc() returns the
- character pushed, or -1 on failure. gzungetc() will fail if a
- character has been pushed but not read yet, or if c is -1. The pushed
- character will be discarded if the stream is repositioned with gzseek()
- or gzrewind().
+ Push one character back onto the stream to be read as the first character
+ on the next read. At least one character of push-back is allowed.
+ gzungetc() returns the character pushed, or -1 on failure. gzungetc() will
+ fail if c is -1, and may fail if a character has been pushed but not read
+ yet. If gzungetc is used immediately after gzopen or gzdopen, at least the
+ output buffer size of pushed characters is allowed. (See gzbuffer above.)
+ The pushed character will be discarded if the stream is repositioned with
+ gzseek() or gzrewind().
*/
-ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
+ZEXTERN int ZEXPORT gzflush OF((gzFile file, int flush));
/*
- Flushes all pending output into the compressed file. The parameter
- flush is as in the deflate() function. The return value is the zlib
- error number (see function gzerror below). gzflush returns Z_OK if
- the flush parameter is Z_FINISH and all output could be flushed.
- gzflush should be called only when strictly necessary because it can
- degrade compression.
+ Flushes all pending output into the compressed file. The parameter flush
+ is as in the deflate() function. The return value is the zlib error number
+ (see function gzerror below). gzflush is only permitted when writing.
+
+ If the flush parameter is Z_FINISH, the remaining data is written and the
+ gzip stream is completed in the output. If gzwrite() is called again, a new
+ gzip stream will be started in the output. gzread() is able to read such
+ concatented gzip streams.
+
+ gzflush should be called only when strictly necessary because it will
+ degrade compression if called too often.
*/
-ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
- z_off_t offset, int whence));
/*
- Sets the starting position for the next gzread or gzwrite on the
- given compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
+ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile file,
+ z_off_t offset, int whence));
+
+ Sets the starting position for the next gzread or gzwrite on the given
+ compressed file. The offset represents a number of bytes in the
+ uncompressed data stream. The whence parameter is defined as in lseek(2);
the value SEEK_END is not supported.
+
If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
+ extremely slow. If the file is opened for writing, only forward seeks are
supported; gzseek then compresses a sequence of zeroes up to the new
starting position.
- gzseek returns the resulting offset location as measured in bytes from
+ gzseek returns the resulting offset location as measured in bytes from
the beginning of the uncompressed stream, or -1 in case of error, in
particular if the file is opened for writing and the new starting position
would be before the current position.
@@ -1069,63 +1355,127 @@ ZEXTERN int ZEXPORT gzrewind OF((gzFile file));
/*
Rewinds the given file. This function is supported only for reading.
- gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+ gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
*/
+/*
ZEXTERN z_off_t ZEXPORT gztell OF((gzFile file));
+
+ Returns the starting position for the next gzread or gzwrite on the given
+ compressed file. This position represents a number of bytes in the
+ uncompressed data stream, and is zero when starting, even if appending or
+ reading a gzip stream from the middle of a file using gzdopen().
+
+ gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+*/
+
/*
- Returns the starting position for the next gzread or gzwrite on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
+ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile file));
- gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+ Returns the current offset in the file being read or written. This offset
+ includes the count of bytes that precede the gzip stream, for example when
+ appending or when using gzdopen() for reading. When reading, the offset
+ does not include as yet unused buffered input. This information can be used
+ for a progress indicator. On error, gzoffset() returns -1.
*/
ZEXTERN int ZEXPORT gzeof OF((gzFile file));
/*
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
+ Returns true (1) if the end-of-file indicator has been set while reading,
+ false (0) otherwise. Note that the end-of-file indicator is set only if the
+ read tried to go past the end of the input, but came up short. Therefore,
+ just like feof(), gzeof() may return false even if there is no more data to
+ read, in the event that the last read request was for the exact number of
+ bytes remaining in the input file. This will happen if the input file size
+ is an exact multiple of the buffer size.
+
+ If gzeof() returns true, then the read functions will return no more data,
+ unless the end-of-file indicator is reset by gzclearerr() and the input file
+ has grown since the previous end of file was detected.
+*/
+
+ZEXTERN int ZEXPORT gzdirect OF((gzFile file));
+/*
+ Returns true (1) if file is being copied directly while reading, or false
+ (0) if file is a gzip stream being decompressed. This state can change from
+ false to true while reading the input file if the end of a gzip stream is
+ reached, but is followed by data that is not another gzip stream.
+
+ If the input file is empty, gzdirect() will return true, since the input
+ does not contain a gzip stream.
+
+ If gzdirect() is used immediately after gzopen() or gzdopen() it will
+ cause buffers to be allocated to allow reading the file to determine if it
+ is a gzip file. Therefore if gzbuffer() is used, it should be called before
+ gzdirect().
*/
ZEXTERN int ZEXPORT gzclose OF((gzFile file));
/*
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression state. The return value is the zlib
- error number (see function gzerror below).
+ Flushes all pending output if necessary, closes the compressed file and
+ deallocates the (de)compression state. Note that once file is closed, you
+ cannot call gzerror with file, since its structures have been deallocated.
+ gzclose must not be called more than once on the same file, just as free
+ must not be called more than once on the same allocation.
+
+ gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a
+ file operation error, or Z_OK on success.
+*/
+
+ZEXTERN int ZEXPORT gzclose_r OF((gzFile file));
+ZEXTERN int ZEXPORT gzclose_w OF((gzFile file));
+/*
+ Same as gzclose(), but gzclose_r() is only for use when reading, and
+ gzclose_w() is only for use when writing or appending. The advantage to
+ using these instead of gzclose() is that they avoid linking in zlib
+ compression or decompression code that is not used when only reading or only
+ writing respectively. If gzclose() is used, then both compression and
+ decompression code will be included the application when linking to a static
+ zlib library.
*/
ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
/*
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to Z_ERRNO and the application may consult errno
- to get the exact error code.
+ Returns the error message for the last error which occurred on the given
+ compressed file. errnum is set to zlib error number. If an error occurred
+ in the file system and not in the compression library, errnum is set to
+ Z_ERRNO and the application may consult errno to get the exact error code.
+
+ The application must not modify the returned string. Future calls to
+ this function may invalidate the previously returned string. If file is
+ closed, then the string previously returned by gzerror will no longer be
+ available.
+
+ gzerror() should be used to distinguish errors from end-of-file for those
+ functions above that do not distinguish those cases in their return values.
*/
ZEXTERN void ZEXPORT gzclearerr OF((gzFile file));
/*
- Clears the error and end-of-file flags for file. This is analogous to the
- clearerr() function in stdio. This is useful for continuing to read a gzip
+ Clears the error and end-of-file flags for file. This is analogous to the
+ clearerr() function in stdio. This is useful for continuing to read a gzip
file that is being written concurrently.
*/
+
/* checksum functions */
/*
These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
+ anyway because they might be useful in applications using the compression
+ library.
*/
ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
-
/*
Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
+ return the updated checksum. If buf is Z_NULL, this function returns the
+ required initial value for the checksum.
+
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster.
+
+ Usage example:
uLong adler = adler32(0L, Z_NULL, 0);
@@ -1135,12 +1485,24 @@ ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
if (adler != original_adler) error();
*/
+/*
+ZEXTERN uLong ZEXPORT adler32_combine OF((uLong adler1, uLong adler2,
+ z_off_t len2));
+
+ Combine two Adler-32 checksums into one. For two sequences of bytes, seq1
+ and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for
+ each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of
+ seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+*/
+
ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
/*
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
+ Update a running CRC-32 with the bytes buf[0..len-1] and return the
+ updated CRC-32. If buf is Z_NULL, this function returns the required
+ initial value for the for the crc. Pre- and post-conditioning (one's
+ complement) is performed within this function so it shouldn't be done by the
+ application.
+
Usage example:
uLong crc = crc32(0L, Z_NULL, 0);
@@ -1151,6 +1513,16 @@ ZEXTERN uLong ZEXPORT crc32 OF((uLong crc, const Bytef *buf, uInt len));
if (crc != original_crc) error();
*/
+/*
+ZEXTERN uLong ZEXPORT crc32_combine OF((uLong crc1, uLong crc2, z_off_t len2));
+
+ Combine two CRC-32 check values into one. For two sequences of bytes,
+ seq1 and seq2 with lengths len1 and len2, CRC-32 check values were
+ calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32
+ check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and
+ len2.
+*/
+
/* various hacks, don't look :) */
@@ -1167,7 +1539,7 @@ ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int level, int method,
int stream_size));
ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int windowBits,
const char *version, int stream_size));
-ZEXTERN int ZEXPORT inflateBackInit_ OF((z_stream FAR *strm, int windowBits,
+ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
unsigned char FAR *window,
const char *version,
int stream_size));
@@ -1182,16 +1554,57 @@ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_stream FAR *strm, int windowBits,
inflateInit2_((strm), (windowBits), ZLIB_VERSION, sizeof(z_stream))
#define inflateBackInit(strm, windowBits, window) \
inflateBackInit_((strm), (windowBits), (window), \
- ZLIB_VERSION, sizeof(z_stream))
+ ZLIB_VERSION, sizeof(z_stream))
+/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or
+ * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if
+ * both are true, the application gets the *64 functions, and the regular
+ * functions are changed to 64 bits) -- in case these are set on systems
+ * without large file support, _LFS64_LARGEFILE must also be true
+ */
+#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off64_t ZEXPORT gzseek64 OF((gzFile, z_off64_t, int));
+ ZEXTERN z_off64_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off64_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off64_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off64_t));
+#endif
+
+#if !defined(ZLIB_INTERNAL) && _FILE_OFFSET_BITS-0 == 64 && _LFS64_LARGEFILE-0
+# define gzopen gzopen64
+# define gzseek gzseek64
+# define gztell gztell64
+# define gzoffset gzoffset64
+# define adler32_combine adler32_combine64
+# define crc32_combine crc32_combine64
+# ifdef _LARGEFILE64_SOURCE
+ ZEXTERN gzFile ZEXPORT gzopen64 OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek64 OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell64 OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset64 OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+# endif
+#else
+ ZEXTERN gzFile ZEXPORT gzopen OF((const char *, const char *));
+ ZEXTERN z_off_t ZEXPORT gzseek OF((gzFile, z_off_t, int));
+ ZEXTERN z_off_t ZEXPORT gztell OF((gzFile));
+ ZEXTERN z_off_t ZEXPORT gzoffset OF((gzFile));
+ ZEXTERN uLong ZEXPORT adler32_combine OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine OF((uLong, uLong, z_off_t));
+#endif
+/* hack for buggy compilers */
#if !defined(ZUTIL_H) && !defined(NO_DUMMY_DECL)
- struct internal_state {int dummy;}; /* hack for buggy compilers */
+ struct internal_state {int dummy;};
#endif
-ZEXTERN const char * ZEXPORT zError OF((int err));
-ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp z));
+/* undocumented functions */
+ZEXTERN const char * ZEXPORT zError OF((int));
+ZEXTERN int ZEXPORT inflateSyncPoint OF((z_streamp));
ZEXTERN const uLongf * ZEXPORT get_crc_table OF((void));
+ZEXTERN int ZEXPORT inflateUndermine OF((z_streamp, int));
#ifdef __cplusplus
}
diff --git a/com32/lib/zlib/FAQ b/com32/lib/zlib/FAQ
index 7115ec3..1a22750 100644
--- a/com32/lib/zlib/FAQ
+++ b/com32/lib/zlib/FAQ
@@ -3,8 +3,8 @@
If your question is not there, please check the zlib home page
-http://www.zlib.org which may have more recent information.
-The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
+http://zlib.net/ which may have more recent information.
+The lastest zlib FAQ is at http://zlib.net/zlib_faq.html
1. Is zlib Y2K-compliant?
@@ -13,54 +13,51 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
2. Where can I get a Windows DLL version?
- The zlib sources can be compiled without change to produce a DLL.
- See the file win32/DLL_FAQ.txt in the zlib distribution.
- Pointers to the precompiled DLL are found in the zlib web site at
- http://www.zlib.org.
+ The zlib sources can be compiled without change to produce a DLL. See the
+ file win32/DLL_FAQ.txt in the zlib distribution. Pointers to the
+ precompiled DLL are found in the zlib web site at http://zlib.net/ .
3. Where can I get a Visual Basic interface to zlib?
See
- * http://www.winimage.com/zLibDll/
- * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
- * contrib/visual-basic.txt in the zlib distribution
+ * http://marknelson.us/1997/01/01/zlib-engine/
+ * win32/DLL_FAQ.txt in the zlib distribution
- 4. compress() returns Z_BUF_ERROR
+ 4. compress() returns Z_BUF_ERROR.
- Make sure that before the call of compress, the length of the compressed
- buffer is equal to the total size of the compressed buffer and not
- zero. For Visual Basic, check that this parameter is passed by reference
+ Make sure that before the call of compress(), the length of the compressed
+ buffer is equal to the available size of the compressed buffer and not
+ zero. For Visual Basic, check that this parameter is passed by reference
("as any"), not by value ("as long").
- 5. deflate() or inflate() returns Z_BUF_ERROR
+ 5. deflate() or inflate() returns Z_BUF_ERROR.
- Before making the call, make sure that avail_in and avail_out are not
- zero. When setting the parameter flush equal to Z_FINISH, also make sure
- that avail_out is big enough to allow processing all pending input.
- Note that a Z_BUF_ERROR is not fatal--another call to deflate() or
- inflate() can be made with more input or output space. A Z_BUF_ERROR
- may in fact be unavoidable depending on how the functions are used, since
- it is not possible to tell whether or not there is more output pending
- when strm.avail_out returns with zero.
+ Before making the call, make sure that avail_in and avail_out are not zero.
+ When setting the parameter flush equal to Z_FINISH, also make sure that
+ avail_out is big enough to allow processing all pending input. Note that a
+ Z_BUF_ERROR is not fatal--another call to deflate() or inflate() can be
+ made with more input or output space. A Z_BUF_ERROR may in fact be
+ unavoidable depending on how the functions are used, since it is not
+ possible to tell whether or not there is more output pending when
+ strm.avail_out returns with zero. See http://zlib.net/zlib_how.html for a
+ heavily annotated example.
6. Where's the zlib documentation (man pages, etc.)?
- It's in zlib.h for the moment, and Francis S. Lin has converted it to a
- web page zlib.html. Volunteers to transform this to Unix-style man pages,
- please contact Jean-loup Gailly (jloup at gzip.org). Examples of zlib usage
- are in the files example.c and minigzip.c.
+ It's in zlib.h . Examples of zlib usage are in the files example.c and
+ minigzip.c, with more in examples/ .
7. Why don't you use GNU autoconf or libtool or ...?
- Because we would like to keep zlib as a very small and simple
- package. zlib is rather portable and doesn't need much configuration.
+ Because we would like to keep zlib as a very small and simple package.
+ zlib is rather portable and doesn't need much configuration.
8. I found a bug in zlib.
- Most of the time, such problems are due to an incorrect usage of
- zlib. Please try to reproduce the problem with a small program and send
- the corresponding source to us at zlib at gzip.org . Do not send
- multi-megabyte data files without prior agreement.
+ Most of the time, such problems are due to an incorrect usage of zlib.
+ Please try to reproduce the problem with a small program and send the
+ corresponding source to us at zlib at gzip.org . Do not send multi-megabyte
+ data files without prior agreement.
9. Why do I get "undefined reference to gzputc"?
@@ -77,11 +74,12 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
11. Can zlib handle .zip archives?
- See the directory contrib/minizip in the zlib distribution.
+ Not by itself, no. See the directory contrib/minizip in the zlib
+ distribution.
12. Can zlib handle .Z files?
- No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
+ No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
the code of uncompress on your own.
13. How can I make a Unix shared library?
@@ -92,81 +90,97 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
14. How do I install a shared zlib library on Unix?
+ After the above, then:
+
make install
However, many flavors of Unix come with a shared zlib already installed.
Before going to the trouble of compiling a shared version of zlib and
- trying to install it, you may want to check if it's already there! If you
- can #include <zlib.h>, it's there. The -lz option will probably link to it.
+ trying to install it, you may want to check if it's already there! If you
+ can #include <zlib.h>, it's there. The -lz option will probably link to
+ it. You can check the version at the top of zlib.h or with the
+ ZLIB_VERSION symbol defined in zlib.h .
-15. I have a question about OttoPDF
+15. I have a question about OttoPDF.
We are not the authors of OttoPDF. The real author is on the OttoPDF web
- site Joel Hainley jhainley at myndkryme.com.
+ site: Joel Hainley, jhainley at myndkryme.com.
+
+16. Can zlib decode Flate data in an Adobe PDF file?
+
+ Yes. See http://www.pdflib.com/ . To modify PDF forms, see
+ http://sourceforge.net/projects/acroformtool/ .
+
+17. Why am I getting this "register_frame_info not found" error on Solaris?
+
+ After installing zlib 1.1.4 on Solaris 2.6, running applications using zlib
+ generates an error such as:
-16. Why does gzip give an error on a file I make with compress/deflate?
+ ld.so.1: rpm: fatal: relocation error: file /usr/local/lib/libz.so:
+ symbol __register_frame_info: referenced symbol not found
+
+ The symbol __register_frame_info is not part of zlib, it is generated by
+ the C compiler (cc or gcc). You must recompile applications using zlib
+ which have this problem. This problem is specific to Solaris. See
+ http://www.sunfreeware.com for Solaris versions of zlib and applications
+ using zlib.
+
+18. Why does gzip give an error on a file I make with compress/deflate?
The compress and deflate functions produce data in the zlib format, which
- is different and incompatible with the gzip format. The gz* functions in
- zlib on the other hand use the gzip format. Both the zlib and gzip
- formats use the same compressed data format internally, but have different
- headers and trailers around the compressed data.
+ is different and incompatible with the gzip format. The gz* functions in
+ zlib on the other hand use the gzip format. Both the zlib and gzip formats
+ use the same compressed data format internally, but have different headers
+ and trailers around the compressed data.
-17. Ok, so why are there two different formats?
+19. Ok, so why are there two different formats?
- The gzip format was designed to retain the directory information about
- a single file, such as the name and last modification date. The zlib
- format on the other hand was designed for in-memory and communication
- channel applications, and has a much more compact header and trailer and
- uses a faster integrity check than gzip.
+ The gzip format was designed to retain the directory information about a
+ single file, such as the name and last modification date. The zlib format
+ on the other hand was designed for in-memory and communication channel
+ applications, and has a much more compact header and trailer and uses a
+ faster integrity check than gzip.
-18. Well that's nice, but how do I make a gzip file in memory?
+20. Well that's nice, but how do I make a gzip file in memory?
You can request that deflate write the gzip format instead of the zlib
- format using deflateInit2(). You can also request that inflate decode
- the gzip format using inflateInit2(). Read zlib.h for more details.
+ format using deflateInit2(). You can also request that inflate decode the
+ gzip format using inflateInit2(). Read zlib.h for more details.
- Note that you cannot specify special gzip header contents (e.g. a file
- name or modification date), nor will inflate tell you what was in the
- gzip header. If you need to customize the header or see what's in it,
- you can use the raw deflate and inflate operations and the crc32()
- function and roll your own gzip encoding and decoding. Read the gzip
- RFC 1952 for details of the header and trailer format.
+21. Is zlib thread-safe?
-19. Is zlib thread-safe?
-
- Yes. However any library routines that zlib uses and any application-
- provided memory allocation routines must also be thread-safe. zlib's gz*
+ Yes. However any library routines that zlib uses and any application-
+ provided memory allocation routines must also be thread-safe. zlib's gz*
functions use stdio library routines, and most of zlib's functions use the
- library memory allocation routines by default. zlib's Init functions allow
- for the application to provide custom memory allocation routines.
+ library memory allocation routines by default. zlib's *Init* functions
+ allow for the application to provide custom memory allocation routines.
Of course, you should only operate on any given zlib or gzip stream from a
single thread at a time.
-20. Can I use zlib in my commercial application?
+22. Can I use zlib in my commercial application?
- Yes. Please read the license in zlib.h.
+ Yes. Please read the license in zlib.h.
-21. Is zlib under the GNU license?
+23. Is zlib under the GNU license?
- No. Please read the license in zlib.h.
+ No. Please read the license in zlib.h.
-22. The license says that altered source versions must be "plainly marked". So
+24. The license says that altered source versions must be "plainly marked". So
what exactly do I need to do to meet that requirement?
- You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
+ You need to change the ZLIB_VERSION and ZLIB_VERNUM #defines in zlib.h. In
particular, the final version number needs to be changed to "f", and an
- identification string should be appended to ZLIB_VERSION. Version numbers
+ identification string should be appended to ZLIB_VERSION. Version numbers
x.x.x.f are reserved for modifications to zlib by others than the zlib
- maintainers. For example, if the version of the base zlib you are altering
+ maintainers. For example, if the version of the base zlib you are altering
is "1.2.3.4", then in zlib.h you should change ZLIB_VERNUM to 0x123f, and
- ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
+ ZLIB_VERSION to something like "1.2.3.f-zachary-mods-v3". You can also
update the version strings in deflate.c and inftrees.c.
For altered source distributions, you should also note the origin and
nature of the changes in zlib.h, as well as in ChangeLog and README, along
- with the dates of the alterations. The origin should include at least your
+ with the dates of the alterations. The origin should include at least your
name (or your company's name), and an email address to contact for help or
issues with the library.
@@ -175,126 +189,143 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
ZLIB_VERSION and ZLIB_VERNUM and note the origin and nature of the changes
in zlib.h as you would for a full source distribution.
-23. Will zlib work on a big-endian or little-endian architecture, and can I
+25. Will zlib work on a big-endian or little-endian architecture, and can I
exchange compressed data between them?
Yes and yes.
-24. Will zlib work on a 64-bit machine?
+26. Will zlib work on a 64-bit machine?
- It should. It has been tested on 64-bit machines, and has no dependence
- on any data types being limited to 32-bits in length. If you have any
+ Yes. It has been tested on 64-bit machines, and has no dependence on any
+ data types being limited to 32-bits in length. If you have any
difficulties, please provide a complete problem report to zlib at gzip.org
-25. Will zlib decompress data from the PKWare Data Compression Library?
+27. Will zlib decompress data from the PKWare Data Compression Library?
- No. The PKWare DCL uses a completely different compressed data format
- than does PKZIP and zlib. However, you can look in zlib's contrib/blast
+ No. The PKWare DCL uses a completely different compressed data format than
+ does PKZIP and zlib. However, you can look in zlib's contrib/blast
directory for a possible solution to your problem.
-26. Can I access data randomly in a compressed stream?
+28. Can I access data randomly in a compressed stream?
- No, not without some preparation. If when compressing you periodically
- use Z_FULL_FLUSH, carefully write all the pending data at those points,
- and keep an index of those locations, then you can start decompression
- at those points. You have to be careful to not use Z_FULL_FLUSH too
- often, since it can significantly degrade compression.
+ No, not without some preparation. If when compressing you periodically use
+ Z_FULL_FLUSH, carefully write all the pending data at those points, and
+ keep an index of those locations, then you can start decompression at those
+ points. You have to be careful to not use Z_FULL_FLUSH too often, since it
+ can significantly degrade compression. Alternatively, you can scan a
+ deflate stream once to generate an index, and then use that index for
+ random access. See examples/zran.c .
-27. Does zlib work on MVS, OS/390, CICS, etc.?
+29. Does zlib work on MVS, OS/390, CICS, etc.?
- We don't know for sure. We have heard occasional reports of success on
- these systems. If you do use it on one of these, please provide us with
- a report, instructions, and patches that we can reference when we get
- these questions. Thanks.
+ It has in the past, but we have not heard of any recent evidence. There
+ were working ports of zlib 1.1.4 to MVS, but those links no longer work.
+ If you know of recent, successful applications of zlib on these operating
+ systems, please let us know. Thanks.
-28. Is there some simpler, easier to read version of inflate I can look at
- to understand the deflate format?
+30. Is there some simpler, easier to read version of inflate I can look at to
+ understand the deflate format?
- First off, you should read RFC 1951. Second, yes. Look in zlib's
+ First off, you should read RFC 1951. Second, yes. Look in zlib's
contrib/puff directory.
-29. Does zlib infringe on any patents?
+31. Does zlib infringe on any patents?
- As far as we know, no. In fact, that was originally the whole point behind
- zlib. Look here for some more information:
+ As far as we know, no. In fact, that was originally the whole point behind
+ zlib. Look here for some more information:
http://www.gzip.org/#faq11
-30. Can zlib work with greater than 4 GB of data?
+32. Can zlib work with greater than 4 GB of data?
- Yes. inflate() and deflate() will process any amount of data correctly.
+ Yes. inflate() and deflate() will process any amount of data correctly.
Each call of inflate() or deflate() is limited to input and output chunks
of the maximum value that can be stored in the compiler's "unsigned int"
- type, but there is no limit to the number of chunks. Note however that the
- strm.total_in and strm_total_out counters may be limited to 4 GB. These
+ type, but there is no limit to the number of chunks. Note however that the
+ strm.total_in and strm_total_out counters may be limited to 4 GB. These
counters are provided as a convenience and are not used internally by
- inflate() or deflate(). The application can easily set up its own counters
+ inflate() or deflate(). The application can easily set up its own counters
updated after each call of inflate() or deflate() to count beyond 4 GB.
compress() and uncompress() may be limited to 4 GB, since they operate in a
- single call. gzseek() and gztell() may be limited to 4 GB depending on how
- zlib is compiled. See the zlibCompileFlags() function in zlib.h.
-
- The word "may" appears several times above since there is a 4 GB limit
- only if the compiler's "long" type is 32 bits. If the compiler's "long"
- type is 64 bits, then the limit is 16 exabytes.
-
-31. Does zlib have any security vulnerabilities?
-
- The only one that we are aware of is potentially in gzprintf(). If zlib
- is compiled to use sprintf() or vsprintf(), then there is no protection
- against a buffer overflow of a 4K string space, other than the caller of
- gzprintf() assuring that the output will not exceed 4K. On the other
- hand, if zlib is compiled to use snprintf() or vsnprintf(), which should
- normally be the case, then there is no vulnerability. The ./configure
- script will display warnings if an insecure variation of sprintf() will
- be used by gzprintf(). Also the zlibCompileFlags() function will return
- information on what variant of sprintf() is used by gzprintf().
+ single call. gzseek() and gztell() may be limited to 4 GB depending on how
+ zlib is compiled. See the zlibCompileFlags() function in zlib.h.
+
+ The word "may" appears several times above since there is a 4 GB limit only
+ if the compiler's "long" type is 32 bits. If the compiler's "long" type is
+ 64 bits, then the limit is 16 exabytes.
+
+33. Does zlib have any security vulnerabilities?
+
+ The only one that we are aware of is potentially in gzprintf(). If zlib is
+ compiled to use sprintf() or vsprintf(), then there is no protection
+ against a buffer overflow of an 8K string space (or other value as set by
+ gzbuffer()), other than the caller of gzprintf() assuring that the output
+ will not exceed 8K. On the other hand, if zlib is compiled to use
+ snprintf() or vsnprintf(), which should normally be the case, then there is
+ no vulnerability. The ./configure script will display warnings if an
+ insecure variation of sprintf() will be used by gzprintf(). Also the
+ zlibCompileFlags() function will return information on what variant of
+ sprintf() is used by gzprintf().
If you don't have snprintf() or vsnprintf() and would like one, you can
find a portable implementation here:
http://www.ijs.si/software/snprintf/
- Note that you should be using the most recent version of zlib. Versions
- 1.1.3 and before were subject to a double-free vulnerability.
+ Note that you should be using the most recent version of zlib. Versions
+ 1.1.3 and before were subject to a double-free vulnerability, and versions
+ 1.2.1 and 1.2.2 were subject to an access exception when decompressing
+ invalid compressed data.
-32. Is there a Java version of zlib?
+34. Is there a Java version of zlib?
Probably what you want is to use zlib in Java. zlib is already included
as part of the Java SDK in the java.util.zip package. If you really want
a version of zlib written in the Java language, look on the zlib home
- page for links: http://www.zlib.org/
+ page for links: http://zlib.net/ .
-33. I get this or that compiler or source-code scanner warning when I crank it
- up to maximally-pendantic. Can't you guys write proper code?
+35. I get this or that compiler or source-code scanner warning when I crank it
+ up to maximally-pedantic. Can't you guys write proper code?
Many years ago, we gave up attempting to avoid warnings on every compiler
- in the universe. It just got to be a waste of time, and some compilers
- were downright silly. So now, we simply make sure that the code always
- works.
-
-34. Will zlib read the (insert any ancient or arcane format here) compressed
+ in the universe. It just got to be a waste of time, and some compilers
+ were downright silly as well as contradicted each other. So now, we simply
+ make sure that the code always works.
+
+36. Valgrind (or some similar memory access checker) says that deflate is
+ performing a conditional jump that depends on an uninitialized value.
+ Isn't that a bug?
+
+ No. That is intentional for performance reasons, and the output of deflate
+ is not affected. This only started showing up recently since zlib 1.2.x
+ uses malloc() by default for allocations, whereas earlier versions used
+ calloc(), which zeros out the allocated memory. Even though the code was
+ correct, versions 1.2.4 and later was changed to not stimulate these
+ checkers.
+
+37. Will zlib read the (insert any ancient or arcane format here) compressed
data format?
Probably not. Look in the comp.compression FAQ for pointers to various
formats and associated software.
-35. How can I encrypt/decrypt zip files with zlib?
+38. How can I encrypt/decrypt zip files with zlib?
- zlib doesn't support encryption. The original PKZIP encryption is very weak
- and can be broken with freely available programs. To get strong encryption,
- use gpg ( http://www.gnupg.org/ ) which already includes zlib compression.
- For PKZIP compatible "encryption", look at http://www.info-zip.org/
+ zlib doesn't support encryption. The original PKZIP encryption is very
+ weak and can be broken with freely available programs. To get strong
+ encryption, use GnuPG, http://www.gnupg.org/ , which already includes zlib
+ compression. For PKZIP compatible "encryption", look at
+ http://www.info-zip.org/
-36. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
+39. What's the difference between the "gzip" and "deflate" HTTP 1.1 encodings?
- "gzip" is the gzip format, and "deflate" is the zlib format. They should
- probably have called the second one "zlib" instead to avoid confusion
- with the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
+ "gzip" is the gzip format, and "deflate" is the zlib format. They should
+ probably have called the second one "zlib" instead to avoid confusion with
+ the raw deflate compressed data format. While the HTTP 1.1 RFC 2616
correctly points to the zlib specification in RFC 1950 for the "deflate"
transfer encoding, there have been reports of servers and browsers that
incorrectly produce or expect raw deflate data per the deflate
- specficiation in RFC 1951, most notably Microsoft. So even though the
+ specficiation in RFC 1951, most notably Microsoft. So even though the
"deflate" transfer encoding using the zlib format would be the more
efficient approach (and in fact exactly what the zlib format was designed
for), using the "gzip" transfer encoding is probably more reliable due to
@@ -302,14 +333,34 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
Bottom line: use the gzip format for HTTP 1.1 encoding.
-37. Does zlib support the new "Deflate64" format introduced by PKWare?
+40. Does zlib support the new "Deflate64" format introduced by PKWare?
+
+ No. PKWare has apparently decided to keep that format proprietary, since
+ they have not documented it as they have previous compression formats. In
+ any case, the compression improvements are so modest compared to other more
+ modern approaches, that it's not worth the effort to implement.
+
+41. I'm having a problem with the zip functions in zlib, can you help?
+
+ There are no zip functions in zlib. You are probably using minizip by
+ Giles Vollant, which is found in the contrib directory of zlib. It is not
+ part of zlib. In fact none of the stuff in contrib is part of zlib. The
+ files in there are not supported by the zlib authors. You need to contact
+ the authors of the respective contribution for help.
+
+42. The match.asm code in contrib is under the GNU General Public License.
+ Since it's part of zlib, doesn't that mean that all of zlib falls under the
+ GNU GPL?
+
+ No. The files in contrib are not part of zlib. They were contributed by
+ other authors and are provided as a convenience to the user within the zlib
+ distribution. Each item in contrib has its own license.
+
+43. Is zlib subject to export controls? What is its ECCN?
- No. PKWare has apparently decided to keep that format proprietary, since
- they have not documented it as they have previous compression formats.
- In any case, the compression improvements are so modest compared to other
- more modern approaches, that it's not worth the effort to implement.
+ zlib is not subject to export controls, and so is classified as EAR99.
-38. Can you please sign these lengthy legal documents and fax them back to us
+44. Can you please sign these lengthy legal documents and fax them back to us
so that we can use your software in our product?
No. Go away. Shoo.
diff --git a/com32/lib/zlib/README b/com32/lib/zlib/README
index 0f12054..d4219bf 100644
--- a/com32/lib/zlib/README
+++ b/com32/lib/zlib/README
@@ -1,57 +1,52 @@
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.1 is a general purpose data compression library. All the code is
+zlib 1.2.5 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
-and rfc1952.txt (gzip format). These documents are also available in other
-formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+and rfc1952.txt (gzip format).
All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact zlib at gzip.org). A usage example
+(volunteer to write man pages welcome, contact zlib at gzip.org). A usage example
of the library is given in the file example.c which also tests that the library
-is working correctly. Another example is given in the file minigzip.c. The
+is working correctly. Another example is given in the file minigzip.c. The
compression library itself is composed of all source files except example.c and
minigzip.c.
To compile all files and run the test program, follow the instructions given at
-the top of Makefile. In short "make test; make install" should work for most
-machines. For Unix: "./configure; make test; make install" For MSDOS, use one
-of the special makefiles such as Makefile.msc. For VMS, use Make_vms.com or
-descrip.mms.
+the top of Makefile.in. In short "./configure; make test", and if that goes
+well, "make install" should work for most flavors of Unix. For Windows, use one
+of the special makefiles in win32/ or contrib/vstudio/ . For VMS, use
+make_vms.com.
Questions about zlib should be sent to <zlib at gzip.org>, or to Gilles Vollant
-<info at winimage.com> for the Windows DLL version. The zlib home page is
-http://www.zlib.org or http://www.gzip.org/zlib/ Before reporting a problem,
-please check this site to verify that you have the latest version of zlib;
-otherwise get the latest version and check whether the problem still exists or
-not.
+<info at winimage.com> for the Windows DLL version. The zlib home page is
+http://zlib.net/ . Before reporting a problem, please check this site to
+verify that you have the latest version of zlib; otherwise get the latest
+version and check whether the problem still exists or not.
-PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html before asking
-for help.
+PLEASE read the zlib FAQ http://zlib.net/zlib_faq.html before asking for help.
-Mark Nelson <markn at ieee.org> wrote an article about zlib for the Jan. 1997
-issue of Dr. Dobb's Journal; a copy of the article is available in
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+Mark Nelson <markn at ieee.org> wrote an article about zlib for the Jan. 1997
+issue of Dr. Dobb's Journal; a copy of the article is available at
+http://marknelson.us/1997/01/01/zlib-engine/ .
-The changes made in version 1.2.1 are documented in the file ChangeLog.
+The changes made in version 1.2.5 are documented in the file ChangeLog.
-Unsupported third party contributions are provided in directory "contrib".
+Unsupported third party contributions are provided in directory contrib/ .
-A Java implementation of zlib is available in the Java Development Kit
-http://java.sun.com/j2se/1.4.2/docs/api/java/util/zip/package-summary.html
-See the zlib home page http://www.zlib.org for details.
+zlib is available in Java using the java.util.zip package, documented at
+http://java.sun.com/developer/technicalArticles/Programming/compression/ .
-A Perl interface to zlib written by Paul Marquess <pmqs at cpan.org> is in the
-CPAN (Comprehensive Perl Archive Network) sites
-http://www.cpan.org/modules/by-module/Compress/
+A Perl interface to zlib written by Paul Marquess <pmqs at cpan.org> is available
+at CPAN (Comprehensive Perl Archive Network) sites, including
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/ .
-A Python interface to zlib written by A.M. Kuchling <amk at magnet.com> is
+A Python interface to zlib written by A.M. Kuchling <amk at amk.ca> is
available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html
+http://www.python.org/doc/lib/module-zlib.html .
-A zlib binding for TCL written by Andreas Kupries <a.kupries at westend.com> is
-availlable at http://www.oche.de/~akupries/soft/trf/trf_zip.html
+zlib is built into tcl: http://wiki.tcl.tk/4610 .
An experimental package to read and write files in .zip format, written on top
of zlib by Gilles Vollant <info at winimage.com>, is available in the
@@ -75,25 +70,21 @@ Notes for some targets:
- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works with
other compilers. Use "make test" to check your compiler.
-- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
+- gzdopen is not supported on RISCOS or BEOS.
- For PalmOs, see http://palmzlib.sourceforge.net/
-- When building a shared, i.e. dynamic library on Mac OS X, the library must be
- installed before testing (do "make install" before "make test"), since the
- library location is specified in the library.
-
Acknowledgments:
- The deflate format used by zlib was defined by Phil Katz. The deflate
- and zlib specifications were written by L. Peter Deutsch. Thanks to all the
- people who reported problems and suggested various improvements in zlib;
- they are too numerous to cite here.
+ The deflate format used by zlib was defined by Phil Katz. The deflate and
+ zlib specifications were written by L. Peter Deutsch. Thanks to all the
+ people who reported problems and suggested various improvements in zlib; they
+ are too numerous to cite here.
Copyright notice:
- (C) 1995-2003 Jean-loup Gailly and Mark Adler
+ (C) 1995-2010 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
@@ -114,13 +105,11 @@ Copyright notice:
Jean-loup Gailly Mark Adler
jloup at gzip.org madler at alumni.caltech.edu
-If you use the zlib library in a product, we would appreciate *not*
-receiving lengthy legal documents to sign. The sources are provided
-for free but without warranty of any kind. The library has been
-entirely written by Jean-loup Gailly and Mark Adler; it does not
-include third-party code.
+If you use the zlib library in a product, we would appreciate *not* receiving
+lengthy legal documents to sign. The sources are provided for free but without
+warranty of any kind. The library has been entirely written by Jean-loup
+Gailly and Mark Adler; it does not include third-party code.
-If you redistribute modified sources, we would appreciate that you include
-in the file ChangeLog history information documenting your changes. Please
-read the FAQ for more information on the distribution of modified source
-versions.
+If you redistribute modified sources, we would appreciate that you include in
+the file ChangeLog history information documenting your changes. Please read
+the FAQ for more information on the distribution of modified source versions.
diff --git a/com32/lib/zlib/adler32.c b/com32/lib/zlib/adler32.c
index 296e45f..65ad6a5 100644
--- a/com32/lib/zlib/adler32.c
+++ b/com32/lib/zlib/adler32.c
@@ -1,22 +1,27 @@
/* adler32.c -- compute the Adler-32 checksum of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2007 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+/* @(#) $Id$ */
-#define ZLIB_INTERNAL
-#include "zlib.h"
+#include "zutil.h"
+
+#define local static
+
+local uLong adler32_combine_(uLong adler1, uLong adler2, z_off64_t len2);
#define BASE 65521UL /* largest prime smaller than 65536 */
#define NMAX 5552
/* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */
-#define DO1(buf,i) {s1 += buf[i]; s2 += s1;}
+#define DO1(buf,i) {adler += (buf)[i]; sum2 += adler;}
#define DO2(buf,i) DO1(buf,i); DO1(buf,i+1);
#define DO4(buf,i) DO2(buf,i); DO2(buf,i+2);
#define DO8(buf,i) DO4(buf,i); DO4(buf,i+4);
#define DO16(buf) DO8(buf,0); DO8(buf,8);
+/* use NO_DIVIDE if your processor does not do division in hardware */
#ifdef NO_DIVIDE
# define MOD(a) \
do { \
@@ -38,8 +43,17 @@
if (a >= (BASE << 1)) a -= (BASE << 1); \
if (a >= BASE) a -= BASE; \
} while (0)
+# define MOD4(a) \
+ do { \
+ if (a >= (BASE << 4)) a -= (BASE << 4); \
+ if (a >= (BASE << 3)) a -= (BASE << 3); \
+ if (a >= (BASE << 2)) a -= (BASE << 2); \
+ if (a >= (BASE << 1)) a -= (BASE << 1); \
+ if (a >= BASE) a -= BASE; \
+ } while (0)
#else
# define MOD(a) a %= BASE
+# define MOD4(a) a %= BASE
#endif
/* ========================================================================= */
@@ -48,26 +62,108 @@ uLong ZEXPORT adler32(adler, buf, len)
const Bytef *buf;
uInt len;
{
- unsigned long s1 = adler & 0xffff;
- unsigned long s2 = (adler >> 16) & 0xffff;
- int k;
+ unsigned long sum2;
+ unsigned n;
+
+ /* split Adler-32 into component sums */
+ sum2 = (adler >> 16) & 0xffff;
+ adler &= 0xffff;
+
+ /* in case user likes doing a byte at a time, keep it fast */
+ if (len == 1) {
+ adler += buf[0];
+ if (adler >= BASE)
+ adler -= BASE;
+ sum2 += adler;
+ if (sum2 >= BASE)
+ sum2 -= BASE;
+ return adler | (sum2 << 16);
+ }
+
+ /* initial Adler-32 value (deferred check for len == 1 speed) */
+ if (buf == Z_NULL)
+ return 1L;
+
+ /* in case short lengths are provided, keep it somewhat fast */
+ if (len < 16) {
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ if (adler >= BASE)
+ adler -= BASE;
+ MOD4(sum2); /* only added so many BASE's */
+ return adler | (sum2 << 16);
+ }
- if (buf == Z_NULL) return 1L;
+ /* do length NMAX blocks -- requires just one modulo operation */
+ while (len >= NMAX) {
+ len -= NMAX;
+ n = NMAX / 16; /* NMAX is divisible by 16 */
+ do {
+ DO16(buf); /* 16 sums unrolled */
+ buf += 16;
+ } while (--n);
+ MOD(adler);
+ MOD(sum2);
+ }
- while (len > 0) {
- k = len < NMAX ? (int)len : NMAX;
- len -= k;
- while (k >= 16) {
+ /* do remaining bytes (less than NMAX, still just one modulo) */
+ if (len) { /* avoid modulos if none remaining */
+ while (len >= 16) {
+ len -= 16;
DO16(buf);
buf += 16;
- k -= 16;
}
- if (k != 0) do {
- s1 += *buf++;
- s2 += s1;
- } while (--k);
- MOD(s1);
- MOD(s2);
+ while (len--) {
+ adler += *buf++;
+ sum2 += adler;
+ }
+ MOD(adler);
+ MOD(sum2);
}
- return (s2 << 16) | s1;
+
+ /* return recombined sums */
+ return adler | (sum2 << 16);
+}
+
+/* ========================================================================= */
+local uLong adler32_combine_(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ unsigned long sum1;
+ unsigned long sum2;
+ unsigned rem;
+
+ /* the derivation of this formula is left as an exercise for the reader */
+ rem = (unsigned)(len2 % BASE);
+ sum1 = adler1 & 0xffff;
+ sum2 = rem * sum1;
+ MOD(sum2);
+ sum1 += (adler2 & 0xffff) + BASE - 1;
+ sum2 += ((adler1 >> 16) & 0xffff) + ((adler2 >> 16) & 0xffff) + BASE - rem;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum1 >= BASE) sum1 -= BASE;
+ if (sum2 >= (BASE << 1)) sum2 -= (BASE << 1);
+ if (sum2 >= BASE) sum2 -= BASE;
+ return sum1 | (sum2 << 16);
+}
+
+/* ========================================================================= */
+uLong ZEXPORT adler32_combine(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
+}
+
+uLong ZEXPORT adler32_combine64(adler1, adler2, len2)
+ uLong adler1;
+ uLong adler2;
+ z_off64_t len2;
+{
+ return adler32_combine_(adler1, adler2, len2);
}
diff --git a/com32/lib/zlib/compress.c b/com32/lib/zlib/compress.c
index 8cc4167..ea4dfbe 100644
--- a/com32/lib/zlib/compress.c
+++ b/com32/lib/zlib/compress.c
@@ -1,8 +1,9 @@
/* compress.c -- compress a memory buffer
- * Copyright (C) 1995-2002 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
@@ -74,5 +75,6 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
uLong ZEXPORT compressBound (sourceLen)
uLong sourceLen;
{
- return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+ (sourceLen >> 25) + 13;
}
diff --git a/com32/lib/zlib/crc32.c b/com32/lib/zlib/crc32.c
index 67e6f31..07265c6 100644
--- a/com32/lib/zlib/crc32.c
+++ b/com32/lib/zlib/crc32.c
@@ -1,14 +1,23 @@
/* crc32.c -- compute the CRC-32 of a data stream
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2006, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Thanks to Rodney Brown <rbrown64 at csc.com.au> for his contribution of faster
* CRC methods: exclusive-oring 32 bits of data at a time, and pre-computing
* tables for updating the shift register in one step with three exclusive-ors
- * instead of four steps with four exclusive-ors. This results about a factor
- * of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
+ * instead of four steps with four exclusive-ors. This results in about a
+ * factor of two increase in speed on a Power PC G4 (PPC7455) using gcc -O3.
*/
+/* @(#) $Id$ */
+
+/*
+ Note on the use of DYNAMIC_CRC_TABLE: there is no mutex or semaphore
+ protection on the static variables used to control the first-use generation
+ of the crc tables. Therefore, if you #define DYNAMIC_CRC_TABLE, you should
+ first call get_crc_table() to initialize the tables before allowing more than
+ one thread to use crc32().
+ */
#ifdef MAKECRCH
# include <stdio.h>
@@ -44,7 +53,7 @@
/* Definitions for doing the crc four data bytes at a time. */
#ifdef BYFOUR
-# define REV(w) (((w)>>24)+(((w)>>8)&0xff00)+ \
+# define REV(w) ((((w)>>24)&0xff)+(((w)>>8)&0xff00)+ \
(((w)&0xff00)<<8)+(((w)&0xff)<<24))
local unsigned long crc32_little OF((unsigned long,
const unsigned char FAR *, unsigned));
@@ -55,15 +64,21 @@
# define TBLS 1
#endif /* BYFOUR */
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+ unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+local uLong crc32_combine_(uLong crc1, uLong crc2, z_off64_t len2);
+
+
#ifdef DYNAMIC_CRC_TABLE
-local int crc_table_empty = 1;
+local volatile int crc_table_empty = 1;
local unsigned long FAR crc_table[TBLS][256];
local void make_crc_table OF((void));
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
#endif /* MAKECRCH */
-
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
@@ -94,38 +109,51 @@ local void make_crc_table()
{
unsigned long c;
int n, k;
- unsigned long poly; /* polynomial exclusive-or pattern */
+ unsigned long poly; /* polynomial exclusive-or pattern */
/* terms of polynomial defining this crc (except x^32): */
+ static volatile int first = 1; /* flag to limit concurrent making */
static const unsigned char p[] = {0,1,2,4,5,7,8,10,11,12,16,22,23,26};
- /* make exclusive-or pattern from polynomial (0xedb88320UL) */
- poly = 0UL;
- for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
- poly |= 1UL << (31 - p[n]);
-
- /* generate a crc for every 8-bit value */
- for (n = 0; n < 256; n++) {
- c = (unsigned long)n;
- for (k = 0; k < 8; k++)
- c = c & 1 ? poly ^ (c >> 1) : c >> 1;
- crc_table[0][n] = c;
- }
+ /* See if another task is already doing this (not thread-safe, but better
+ than nothing -- significantly reduces duration of vulnerability in
+ case the advice about DYNAMIC_CRC_TABLE is ignored) */
+ if (first) {
+ first = 0;
+
+ /* make exclusive-or pattern from polynomial (0xedb88320UL) */
+ poly = 0UL;
+ for (n = 0; n < (int)(sizeof(p)/sizeof(unsigned char)); n++)
+ poly |= 1UL << (31 - p[n]);
+
+ /* generate a crc for every 8-bit value */
+ for (n = 0; n < 256; n++) {
+ c = (unsigned long)n;
+ for (k = 0; k < 8; k++)
+ c = c & 1 ? poly ^ (c >> 1) : c >> 1;
+ crc_table[0][n] = c;
+ }
#ifdef BYFOUR
- /* generate crc for each value followed by one, two, and three zeros, and
- then the byte reversal of those as well as the first table */
- for (n = 0; n < 256; n++) {
- c = crc_table[0][n];
- crc_table[4][n] = REV(c);
- for (k = 1; k < 4; k++) {
- c = crc_table[0][c & 0xff] ^ (c >> 8);
- crc_table[k][n] = c;
- crc_table[k + 4][n] = REV(c);
+ /* generate crc for each value followed by one, two, and three zeros,
+ and then the byte reversal of those as well as the first table */
+ for (n = 0; n < 256; n++) {
+ c = crc_table[0][n];
+ crc_table[4][n] = REV(c);
+ for (k = 1; k < 4; k++) {
+ c = crc_table[0][c & 0xff] ^ (c >> 8);
+ crc_table[k][n] = c;
+ crc_table[k + 4][n] = REV(c);
+ }
}
- }
#endif /* BYFOUR */
- crc_table_empty = 0;
+ crc_table_empty = 0;
+ }
+ else { /* not first */
+ /* wait for the other guy to finish (not efficient, but rare) */
+ while (crc_table_empty)
+ ;
+ }
#ifdef MAKECRCH
/* write out CRC tables to crc32.h */
@@ -179,9 +207,10 @@ local void write_table(out, table)
const unsigned long FAR * ZEXPORT get_crc_table()
{
#ifdef DYNAMIC_CRC_TABLE
- if (crc_table_empty) make_crc_table();
+ if (crc_table_empty)
+ make_crc_table();
#endif /* DYNAMIC_CRC_TABLE */
- return (const unsigned long FAR *)crc_table;
+ return (const unsigned long FAR *)crc_table;
}
/* ========================================================================= */
@@ -192,7 +221,7 @@ const unsigned long FAR * ZEXPORT get_crc_table()
unsigned long ZEXPORT crc32(crc, buf, len)
unsigned long crc;
const unsigned char FAR *buf;
- unsigned len;
+ uInt len;
{
if (buf == Z_NULL) return 0UL;
@@ -247,7 +276,7 @@ local unsigned long crc32_little(crc, buf, len)
len--;
}
- buf4 = (const u4 FAR *)buf;
+ buf4 = (const u4 FAR *)(const void FAR *)buf;
while (len >= 32) {
DOLIT32;
len -= 32;
@@ -287,7 +316,7 @@ local unsigned long crc32_big(crc, buf, len)
len--;
}
- buf4 = (const u4 FAR *)buf;
+ buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4--;
while (len >= 32) {
DOBIG32;
@@ -308,3 +337,106 @@ local unsigned long crc32_big(crc, buf, len)
}
#endif /* BYFOUR */
+
+#define GF2_DIM 32 /* dimension of GF(2) vectors (length of CRC) */
+
+/* ========================================================================= */
+local unsigned long gf2_matrix_times(mat, vec)
+ unsigned long *mat;
+ unsigned long vec;
+{
+ unsigned long sum;
+
+ sum = 0;
+ while (vec) {
+ if (vec & 1)
+ sum ^= *mat;
+ vec >>= 1;
+ mat++;
+ }
+ return sum;
+}
+
+/* ========================================================================= */
+local void gf2_matrix_square(square, mat)
+ unsigned long *square;
+ unsigned long *mat;
+{
+ int n;
+
+ for (n = 0; n < GF2_DIM; n++)
+ square[n] = gf2_matrix_times(mat, mat[n]);
+}
+
+/* ========================================================================= */
+local uLong crc32_combine_(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off64_t len2;
+{
+ int n;
+ unsigned long row;
+ unsigned long even[GF2_DIM]; /* even-power-of-two zeros operator */
+ unsigned long odd[GF2_DIM]; /* odd-power-of-two zeros operator */
+
+ /* degenerate case (also disallow negative lengths) */
+ if (len2 <= 0)
+ return crc1;
+
+ /* put operator for one zero bit in odd */
+ odd[0] = 0xedb88320UL; /* CRC-32 polynomial */
+ row = 1;
+ for (n = 1; n < GF2_DIM; n++) {
+ odd[n] = row;
+ row <<= 1;
+ }
+
+ /* put operator for two zero bits in even */
+ gf2_matrix_square(even, odd);
+
+ /* put operator for four zero bits in odd */
+ gf2_matrix_square(odd, even);
+
+ /* apply len2 zeros to crc1 (first square will put the operator for one
+ zero byte, eight zero bits, in even) */
+ do {
+ /* apply zeros operator for this bit of len2 */
+ gf2_matrix_square(even, odd);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(even, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ if (len2 == 0)
+ break;
+
+ /* another iteration of the loop with odd and even swapped */
+ gf2_matrix_square(odd, even);
+ if (len2 & 1)
+ crc1 = gf2_matrix_times(odd, crc1);
+ len2 >>= 1;
+
+ /* if no more bits set, then done */
+ } while (len2 != 0);
+
+ /* return combined crc */
+ crc1 ^= crc2;
+ return crc1;
+}
+
+/* ========================================================================= */
+uLong ZEXPORT crc32_combine(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off_t len2;
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
+
+uLong ZEXPORT crc32_combine64(crc1, crc2, len2)
+ uLong crc1;
+ uLong crc2;
+ z_off64_t len2;
+{
+ return crc32_combine_(crc1, crc2, len2);
+}
diff --git a/com32/lib/zlib/deflate.c b/com32/lib/zlib/deflate.c
index b66cb98..5c4022f 100644
--- a/com32/lib/zlib/deflate.c
+++ b/com32/lib/zlib/deflate.c
@@ -1,5 +1,5 @@
/* deflate.c -- compress data using the deflation algorithm
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -47,11 +47,12 @@
*
*/
+/* @(#) $Id$ */
#include "deflate.h"
const char deflate_copyright[] =
- " deflate 1.2.1 Copyright 1995-2003 Jean-loup Gailly ";
+ " deflate 1.2.5 Copyright 1995-2010 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -78,21 +79,20 @@ local block_state deflate_fast OF((deflate_state *s, int flush));
#ifndef FASTEST
local block_state deflate_slow OF((deflate_state *s, int flush));
#endif
+local block_state deflate_rle OF((deflate_state *s, int flush));
+local block_state deflate_huff OF((deflate_state *s, int flush));
local void lm_init OF((deflate_state *s));
local void putShortMSB OF((deflate_state *s, uInt b));
local void flush_pending OF((z_streamp strm));
local int read_buf OF((z_streamp strm, Bytef *buf, unsigned size));
-#ifndef FASTEST
#ifdef ASMV
void match_init OF((void)); /* asm code initialization */
uInt longest_match OF((deflate_state *s, IPos cur_match));
#else
local uInt longest_match OF((deflate_state *s, IPos cur_match));
#endif
-#endif
-local uInt longest_match_fast OF((deflate_state *s, IPos cur_match));
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
local void check_match OF((deflate_state *s, IPos start, IPos match,
int length));
#endif
@@ -109,11 +109,6 @@ local void check_match OF((deflate_state *s, IPos start, IPos match,
#endif
/* Matches of length 3 are discarded if their distance exceeds TOO_FAR */
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
/* Values for max_lazy_match, good_match and max_chain_length, depending on
* the desired pack level (0..9). The values given below have been tuned to
* exclude worst case performance for pathological files. Better values may be
@@ -263,7 +258,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
#endif
if (memLevel < 1 || memLevel > MAX_MEM_LEVEL || method != Z_DEFLATED ||
windowBits < 8 || windowBits > 15 || level < 0 || level > 9 ||
- strategy < 0 || strategy > Z_RLE) {
+ strategy < 0 || strategy > Z_FIXED) {
return Z_STREAM_ERROR;
}
if (windowBits == 8) windowBits = 9; /* until 256-byte window bug fixed */
@@ -273,6 +268,7 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
s->strm = strm;
s->wrap = wrap;
+ s->gzhead = Z_NULL;
s->w_bits = windowBits;
s->w_size = 1 << s->w_bits;
s->w_mask = s->w_size - 1;
@@ -286,6 +282,8 @@ int ZEXPORT deflateInit2_(strm, level, method, windowBits, memLevel, strategy,
s->prev = (Posf *) ZALLOC(strm, s->w_size, sizeof(Pos));
s->head = (Posf *) ZALLOC(strm, s->hash_size, sizeof(Pos));
+ s->high_water = 0; /* nothing written to s->window yet */
+
s->lit_bufsize = 1 << (memLevel + 6); /* 16K elements by default */
overlay = (ushf *) ZALLOC(strm, s->lit_bufsize, sizeof(ush)+2);
@@ -330,11 +328,9 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
strm->adler = adler32(strm->adler, dictionary, dictLength);
if (length < MIN_MATCH) return Z_OK;
- if (length > MAX_DIST(s)) {
- length = MAX_DIST(s);
-#ifndef USE_DICT_HEAD
+ if (length > s->w_size) {
+ length = s->w_size;
dictionary += dictLength - length; /* use the tail of the dictionary */
-#endif
}
zmemcpy(s->window, dictionary, length);
s->strstart = length;
@@ -390,6 +386,17 @@ int ZEXPORT deflateReset (strm)
}
/* ========================================================================= */
+int ZEXPORT deflateSetHeader (strm, head)
+ z_streamp strm;
+ gz_headerp head;
+{
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ if (strm->state->wrap != 2) return Z_STREAM_ERROR;
+ strm->state->gzhead = head;
+ return Z_OK;
+}
+
+/* ========================================================================= */
int ZEXPORT deflatePrime (strm, bits, value)
z_streamp strm;
int bits;
@@ -419,14 +426,15 @@ int ZEXPORT deflateParams(strm, level, strategy)
#else
if (level == Z_DEFAULT_COMPRESSION) level = 6;
#endif
- if (level < 0 || level > 9 || strategy < 0 || strategy > Z_RLE) {
+ if (level < 0 || level > 9 || strategy < 0 || strategy > Z_FIXED) {
return Z_STREAM_ERROR;
}
func = configuration_table[s->level].func;
- if (func != configuration_table[level].func && strm->total_in != 0) {
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
+ strm->total_in != 0) {
/* Flush the last buffer: */
- err = deflate(strm, Z_PARTIAL_FLUSH);
+ err = deflate(strm, Z_BLOCK);
}
if (s->level != level) {
s->level = level;
@@ -439,6 +447,25 @@ int ZEXPORT deflateParams(strm, level, strategy)
return err;
}
+/* ========================================================================= */
+int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
+ z_streamp strm;
+ int good_length;
+ int max_lazy;
+ int nice_length;
+ int max_chain;
+{
+ deflate_state *s;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ s = strm->state;
+ s->good_match = good_length;
+ s->max_lazy_match = max_lazy;
+ s->nice_match = nice_length;
+ s->max_chain_length = max_chain;
+ return Z_OK;
+}
+
/* =========================================================================
* For the default windowBits of 15 and memLevel of 8, this function returns
* a close to exact, as well as small, upper bound on the compressed size.
@@ -451,33 +478,66 @@ int ZEXPORT deflateParams(strm, level, strategy)
* resulting from using fixed blocks instead of stored blocks, which deflate
* can emit on compressed data for some combinations of the parameters.
*
- * This function could be more sophisticated to provide closer upper bounds
- * for every combination of windowBits and memLevel, as well as wrap.
- * But even the conservative upper bound of about 14% expansion does not
- * seem onerous for output buffer allocation.
+ * This function could be more sophisticated to provide closer upper bounds for
+ * every combination of windowBits and memLevel. But even the conservative
+ * upper bound of about 14% expansion does not seem onerous for output buffer
+ * allocation.
*/
uLong ZEXPORT deflateBound(strm, sourceLen)
z_streamp strm;
uLong sourceLen;
{
deflate_state *s;
- uLong destLen;
+ uLong complen, wraplen;
+ Bytef *str;
- /* conservative upper bound */
- destLen = sourceLen +
- ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11;
+ /* conservative upper bound for compressed data */
+ complen = sourceLen +
+ ((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
- /* if can't get parameters, return conservative bound */
+ /* if can't get parameters, return conservative bound plus zlib wrapper */
if (strm == Z_NULL || strm->state == Z_NULL)
- return destLen;
+ return complen + 6;
- /* if not default parameters, return conservative bound */
+ /* compute wrapper length */
s = strm->state;
+ switch (s->wrap) {
+ case 0: /* raw deflate */
+ wraplen = 0;
+ break;
+ case 1: /* zlib wrapper */
+ wraplen = 6 + (s->strstart ? 4 : 0);
+ break;
+ case 2: /* gzip wrapper */
+ wraplen = 18;
+ if (s->gzhead != Z_NULL) { /* user-supplied gzip header */
+ if (s->gzhead->extra != Z_NULL)
+ wraplen += 2 + s->gzhead->extra_len;
+ str = s->gzhead->name;
+ if (str != Z_NULL)
+ do {
+ wraplen++;
+ } while (*str++);
+ str = s->gzhead->comment;
+ if (str != Z_NULL)
+ do {
+ wraplen++;
+ } while (*str++);
+ if (s->gzhead->hcrc)
+ wraplen += 2;
+ }
+ break;
+ default: /* for compiler happiness */
+ wraplen = 6;
+ }
+
+ /* if not default parameters, return conservative bound */
if (s->w_bits != 15 || s->hash_bits != 8 + 7)
- return destLen;
+ return complen + wraplen;
/* default settings: return tight bound for that case */
- return compressBound(sourceLen);
+ return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
+ (sourceLen >> 25) + 13 - 6 + wraplen;
}
/* =========================================================================
@@ -527,7 +587,7 @@ int ZEXPORT deflate (strm, flush)
deflate_state *s;
if (strm == Z_NULL || strm->state == Z_NULL ||
- flush > Z_FINISH || flush < 0) {
+ flush > Z_BLOCK || flush < 0) {
return Z_STREAM_ERROR;
}
s = strm->state;
@@ -547,20 +607,47 @@ int ZEXPORT deflate (strm, flush)
if (s->status == INIT_STATE) {
#ifdef GZIP
if (s->wrap == 2) {
+ strm->adler = crc32(0L, Z_NULL, 0);
put_byte(s, 31);
put_byte(s, 139);
put_byte(s, 8);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, 0);
- put_byte(s, s->level == 9 ? 2 :
- (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
- 4 : 0));
- put_byte(s, 255);
- s->status = BUSY_STATE;
- strm->adler = crc32(0L, Z_NULL, 0);
+ if (s->gzhead == Z_NULL) {
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, 0);
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, OS_CODE);
+ s->status = BUSY_STATE;
+ }
+ else {
+ put_byte(s, (s->gzhead->text ? 1 : 0) +
+ (s->gzhead->hcrc ? 2 : 0) +
+ (s->gzhead->extra == Z_NULL ? 0 : 4) +
+ (s->gzhead->name == Z_NULL ? 0 : 8) +
+ (s->gzhead->comment == Z_NULL ? 0 : 16)
+ );
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
+ put_byte(s, s->level == 9 ? 2 :
+ (s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
+ 4 : 0));
+ put_byte(s, s->gzhead->os & 0xff);
+ if (s->gzhead->extra != Z_NULL) {
+ put_byte(s, s->gzhead->extra_len & 0xff);
+ put_byte(s, (s->gzhead->extra_len >> 8) & 0xff);
+ }
+ if (s->gzhead->hcrc)
+ strm->adler = crc32(strm->adler, s->pending_buf,
+ s->pending);
+ s->gzindex = 0;
+ s->status = EXTRA_STATE;
+ }
}
else
#endif
@@ -591,6 +678,110 @@ int ZEXPORT deflate (strm, flush)
strm->adler = adler32(0L, Z_NULL, 0);
}
}
+#ifdef GZIP
+ if (s->status == EXTRA_STATE) {
+ if (s->gzhead->extra != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+
+ while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size)
+ break;
+ }
+ put_byte(s, s->gzhead->extra[s->gzindex]);
+ s->gzindex++;
+ }
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (s->gzindex == s->gzhead->extra_len) {
+ s->gzindex = 0;
+ s->status = NAME_STATE;
+ }
+ }
+ else
+ s->status = NAME_STATE;
+ }
+ if (s->status == NAME_STATE) {
+ if (s->gzhead->name != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->name[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0) {
+ s->gzindex = 0;
+ s->status = COMMENT_STATE;
+ }
+ }
+ else
+ s->status = COMMENT_STATE;
+ }
+ if (s->status == COMMENT_STATE) {
+ if (s->gzhead->comment != Z_NULL) {
+ uInt beg = s->pending; /* start of bytes to update crc */
+ int val;
+
+ do {
+ if (s->pending == s->pending_buf_size) {
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ flush_pending(strm);
+ beg = s->pending;
+ if (s->pending == s->pending_buf_size) {
+ val = 1;
+ break;
+ }
+ }
+ val = s->gzhead->comment[s->gzindex++];
+ put_byte(s, val);
+ } while (val != 0);
+ if (s->gzhead->hcrc && s->pending > beg)
+ strm->adler = crc32(strm->adler, s->pending_buf + beg,
+ s->pending - beg);
+ if (val == 0)
+ s->status = HCRC_STATE;
+ }
+ else
+ s->status = HCRC_STATE;
+ }
+ if (s->status == HCRC_STATE) {
+ if (s->gzhead->hcrc) {
+ if (s->pending + 2 > s->pending_buf_size)
+ flush_pending(strm);
+ if (s->pending + 2 <= s->pending_buf_size) {
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
+ strm->adler = crc32(0L, Z_NULL, 0);
+ s->status = BUSY_STATE;
+ }
+ }
+ else
+ s->status = BUSY_STATE;
+ }
+#endif
/* Flush as much pending output as possible */
if (s->pending != 0) {
@@ -626,7 +817,9 @@ int ZEXPORT deflate (strm, flush)
(flush != Z_NO_FLUSH && s->status != FINISH_STATE)) {
block_state bstate;
- bstate = (*(configuration_table[s->level].func))(s, flush);
+ bstate = s->strategy == Z_HUFFMAN_ONLY ? deflate_huff(s, flush) :
+ (s->strategy == Z_RLE ? deflate_rle(s, flush) :
+ (*(configuration_table[s->level].func))(s, flush));
if (bstate == finish_started || bstate == finish_done) {
s->status = FINISH_STATE;
@@ -647,13 +840,17 @@ int ZEXPORT deflate (strm, flush)
if (bstate == block_done) {
if (flush == Z_PARTIAL_FLUSH) {
_tr_align(s);
- } else { /* FULL_FLUSH or SYNC_FLUSH */
+ } else if (flush != Z_BLOCK) { /* FULL_FLUSH or SYNC_FLUSH */
_tr_stored_block(s, (char*)0, 0L, 0);
/* For a full flush, this empty block will be recognized
* as a special marker by inflate_sync().
*/
if (flush == Z_FULL_FLUSH) {
CLEAR_HASH(s); /* forget history */
+ if (s->lookahead == 0) {
+ s->strstart = 0;
+ s->block_start = 0L;
+ }
}
}
flush_pending(strm);
@@ -703,7 +900,12 @@ int ZEXPORT deflateEnd (strm)
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
status = strm->state->status;
- if (status != INIT_STATE && status != BUSY_STATE &&
+ if (status != INIT_STATE &&
+ status != EXTRA_STATE &&
+ status != NAME_STATE &&
+ status != COMMENT_STATE &&
+ status != HCRC_STATE &&
+ status != BUSY_STATE &&
status != FINISH_STATE) {
return Z_STREAM_ERROR;
}
@@ -743,12 +945,12 @@ int ZEXPORT deflateCopy (dest, source)
ss = source->state;
- *dest = *source;
+ zmemcpy(dest, source, sizeof(z_stream));
ds = (deflate_state *) ZALLOC(dest, 1, sizeof(deflate_state));
if (ds == Z_NULL) return Z_MEM_ERROR;
dest->state = (struct internal_state FAR *) ds;
- *ds = *ss;
+ zmemcpy(ds, ss, sizeof(deflate_state));
ds->strm = dest;
ds->window = (Bytef *) ZALLOC(dest, ds->w_size, 2*sizeof(Byte));
@@ -837,9 +1039,11 @@ local void lm_init (s)
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
s->ins_h = 0;
+#ifndef FASTEST
#ifdef ASMV
match_init(); /* initialize the asm code */
#endif
+#endif
}
#ifndef FASTEST
@@ -908,7 +1112,12 @@ local uInt longest_match(s, cur_match)
match = s->window + cur_match;
/* Skip to next match if the match length cannot increase
- * or if the match length is less than 2:
+ * or if the match length is less than 2. Note that the checks below
+ * for insufficient lookahead only occur occasionally for performance
+ * reasons. Therefore uninitialized memory will be accessed, and
+ * conditional jumps will be made that depend on those values.
+ * However the length of the match is limited to the lookahead, so
+ * the output of deflate is not affected by the uninitialized values.
*/
#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
/* This code assumes sizeof(unsigned short) == 2. Do not use
@@ -994,12 +1203,13 @@ local uInt longest_match(s, cur_match)
return s->lookahead;
}
#endif /* ASMV */
-#endif /* FASTEST */
+
+#else /* FASTEST */
/* ---------------------------------------------------------------------------
- * Optimized version for level == 1 or strategy == Z_RLE only
+ * Optimized version for FASTEST only
*/
-local uInt longest_match_fast(s, cur_match)
+local uInt longest_match(s, cur_match)
deflate_state *s;
IPos cur_match; /* current match */
{
@@ -1052,7 +1262,9 @@ local uInt longest_match_fast(s, cur_match)
return (uInt)len <= s->lookahead ? (uInt)len : s->lookahead;
}
-#ifdef DEBUG_ZLIB
+#endif /* FASTEST */
+
+#ifdef DEBUG
/* ===========================================================================
* Check that the match at match_start is indeed a match.
*/
@@ -1078,7 +1290,7 @@ local void check_match(s, start, match, length)
}
#else
# define check_match(s, start, match, length)
-#endif /* DEBUG_ZLIB */
+#endif /* DEBUG */
/* ===========================================================================
* Fill the window when the lookahead becomes insufficient.
@@ -1181,27 +1393,61 @@ local void fill_window(s)
*/
} while (s->lookahead < MIN_LOOKAHEAD && s->strm->avail_in != 0);
+
+ /* If the WIN_INIT bytes after the end of the current data have never been
+ * written, then zero those bytes in order to avoid memory check reports of
+ * the use of uninitialized (or uninitialised as Julian writes) bytes by
+ * the longest match routines. Update the high water mark for the next
+ * time through here. WIN_INIT is set to MAX_MATCH since the longest match
+ * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead.
+ */
+ if (s->high_water < s->window_size) {
+ ulg curr = s->strstart + (ulg)(s->lookahead);
+ ulg init;
+
+ if (s->high_water < curr) {
+ /* Previous high water mark below current data -- zero WIN_INIT
+ * bytes or up to end of window, whichever is less.
+ */
+ init = s->window_size - curr;
+ if (init > WIN_INIT)
+ init = WIN_INIT;
+ zmemzero(s->window + curr, (unsigned)init);
+ s->high_water = curr + init;
+ }
+ else if (s->high_water < (ulg)curr + WIN_INIT) {
+ /* High water mark at or above current data, but below current data
+ * plus WIN_INIT -- zero out to current data plus WIN_INIT, or up
+ * to end of window, whichever is less.
+ */
+ init = (ulg)curr + WIN_INIT - s->high_water;
+ if (init > s->window_size - s->high_water)
+ init = s->window_size - s->high_water;
+ zmemzero(s->window + s->high_water, (unsigned)init);
+ s->high_water += init;
+ }
+ }
}
/* ===========================================================================
* Flush the current block, with given end-of-file flag.
* IN assertion: strstart is set to the end of the current match.
*/
-#define FLUSH_BLOCK_ONLY(s, eof) { \
+#define FLUSH_BLOCK_ONLY(s, last) { \
_tr_flush_block(s, (s->block_start >= 0L ? \
(charf *)&s->window[(unsigned)s->block_start] : \
(charf *)Z_NULL), \
(ulg)((long)s->strstart - s->block_start), \
- (eof)); \
+ (last)); \
s->block_start = s->strstart; \
flush_pending(s->strm); \
Tracev((stderr,"[FLUSH]")); \
}
/* Same but force premature exit if necessary. */
-#define FLUSH_BLOCK(s, eof) { \
- FLUSH_BLOCK_ONLY(s, eof); \
- if (s->strm->avail_out == 0) return (eof) ? finish_started : need_more; \
+#define FLUSH_BLOCK(s, last) { \
+ FLUSH_BLOCK_ONLY(s, last); \
+ if (s->strm->avail_out == 0) return (last) ? finish_started : need_more; \
}
/* ===========================================================================
@@ -1275,7 +1521,7 @@ local block_state deflate_fast(s, flush)
deflate_state *s;
int flush;
{
- IPos hash_head = NIL; /* head of the hash chain */
+ IPos hash_head; /* head of the hash chain */
int bflush; /* set if current block must be flushed */
for (;;) {
@@ -1295,6 +1541,7 @@ local block_state deflate_fast(s, flush)
/* Insert the string window[strstart .. strstart+2] in the
* dictionary, and set hash_head to the head of the hash chain:
*/
+ hash_head = NIL;
if (s->lookahead >= MIN_MATCH) {
INSERT_STRING(s, s->strstart, hash_head);
}
@@ -1307,19 +1554,8 @@ local block_state deflate_fast(s, flush)
* of window index 0 (in particular we have to avoid a match
* of the string with itself at the start of the input file).
*/
-#ifdef FASTEST
- if ((s->strategy < Z_HUFFMAN_ONLY) ||
- (s->strategy == Z_RLE && s->strstart - hash_head == 1)) {
- s->match_length = longest_match_fast (s, hash_head);
- }
-#else
- if (s->strategy < Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
- s->match_length = longest_match_fast (s, hash_head);
- }
-#endif
- /* longest_match() or longest_match_fast() sets match_start */
+ s->match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
}
if (s->match_length >= MIN_MATCH) {
check_match(s, s->strstart, s->match_start, s->match_length);
@@ -1381,7 +1617,7 @@ local block_state deflate_slow(s, flush)
deflate_state *s;
int flush;
{
- IPos hash_head = NIL; /* head of hash chain */
+ IPos hash_head; /* head of hash chain */
int bflush; /* set if current block must be flushed */
/* Process the input block. */
@@ -1402,6 +1638,7 @@ local block_state deflate_slow(s, flush)
/* Insert the string window[strstart .. strstart+2] in the
* dictionary, and set hash_head to the head of the hash chain:
*/
+ hash_head = NIL;
if (s->lookahead >= MIN_MATCH) {
INSERT_STRING(s, s->strstart, hash_head);
}
@@ -1417,12 +1654,8 @@ local block_state deflate_slow(s, flush)
* of window index 0 (in particular we have to avoid a match
* of the string with itself at the start of the input file).
*/
- if (s->strategy < Z_HUFFMAN_ONLY) {
- s->match_length = longest_match (s, hash_head);
- } else if (s->strategy == Z_RLE && s->strstart - hash_head == 1) {
- s->match_length = longest_match_fast (s, hash_head);
- }
- /* longest_match() or longest_match_fast() sets match_start */
+ s->match_length = longest_match (s, hash_head);
+ /* longest_match() sets match_start */
if (s->match_length <= 5 && (s->strategy == Z_FILTERED
#if TOO_FAR <= 32767
@@ -1499,3 +1732,103 @@ local block_state deflate_slow(s, flush)
return flush == Z_FINISH ? finish_done : block_done;
}
#endif /* FASTEST */
+
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+ uInt prev; /* byte at distance one to match */
+ Bytef *scan, *strend; /* scan goes up to strend for length of run */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the longest encodable run.
+ */
+ if (s->lookahead < MAX_MATCH) {
+ fill_window(s);
+ if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* See how many times the previous byte repeats */
+ s->match_length = 0;
+ if (s->lookahead >= MIN_MATCH && s->strstart > 0) {
+ scan = s->window + s->strstart - 1;
+ prev = *scan;
+ if (prev == *++scan && prev == *++scan && prev == *++scan) {
+ strend = s->window + s->strstart + MAX_MATCH;
+ do {
+ } while (prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ prev == *++scan && prev == *++scan &&
+ scan < strend);
+ s->match_length = MAX_MATCH - (int)(strend - scan);
+ if (s->match_length > s->lookahead)
+ s->match_length = s->lookahead;
+ }
+ }
+
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+ if (s->match_length >= MIN_MATCH) {
+ check_match(s, s->strstart, s->strstart - 1, s->match_length);
+
+ _tr_tally_dist(s, 1, s->match_length - MIN_MATCH, bflush);
+
+ s->lookahead -= s->match_length;
+ s->strstart += s->match_length;
+ s->match_length = 0;
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+
+/* ===========================================================================
+ * For Z_HUFFMAN_ONLY, do not look for matches. Do not maintain a hash table.
+ * (It will be regenerated if this run of deflate switches away from Huffman.)
+ */
+local block_state deflate_huff(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+
+ for (;;) {
+ /* Make sure that we have a literal to write. */
+ if (s->lookahead == 0) {
+ fill_window(s);
+ if (s->lookahead == 0) {
+ if (flush == Z_NO_FLUSH)
+ return need_more;
+ break; /* flush the current block */
+ }
+ }
+
+ /* Output a literal byte */
+ s->match_length = 0;
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
diff --git a/com32/lib/zlib/deflate.h b/com32/lib/zlib/deflate.h
index ea8d9ef..cbf0d1e 100644
--- a/com32/lib/zlib/deflate.h
+++ b/com32/lib/zlib/deflate.h
@@ -1,5 +1,5 @@
/* deflate.h -- internal compression state
- * Copyright (C) 1995-2002 Jean-loup Gailly
+ * Copyright (C) 1995-2010 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -8,6 +8,7 @@
subject to change. Applications should only use zlib.h.
*/
+/* @(#) $Id$ */
#ifndef DEFLATE_H
#define DEFLATE_H
@@ -48,6 +49,10 @@
/* All codes must not exceed MAX_BITS bits */
#define INIT_STATE 42
+#define EXTRA_STATE 69
+#define NAME_STATE 73
+#define COMMENT_STATE 91
+#define HCRC_STATE 103
#define BUSY_STATE 113
#define FINISH_STATE 666
/* Stream status */
@@ -92,9 +97,10 @@ typedef struct internal_state {
Bytef *pending_buf; /* output still pending */
ulg pending_buf_size; /* size of pending_buf */
Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
+ uInt pending; /* nb of bytes in the pending buffer */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
- Byte data_type; /* UNKNOWN, BINARY or ASCII */
+ gz_headerp gzhead; /* gzip header information to write */
+ uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
@@ -240,7 +246,7 @@ typedef struct internal_state {
uInt matches; /* number of string matches in current block */
int last_eob_len; /* bit length of EOB code for last block */
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
ulg compressed_len; /* total bit length of compressed file mod 2^32 */
ulg bits_sent; /* bit length of compressed data sent mod 2^32 */
#endif
@@ -254,6 +260,13 @@ typedef struct internal_state {
* are always zero.
*/
+ ulg high_water;
+ /* High water mark offset in window for initialized bytes -- bytes above
+ * this are set to zero in order to avoid memory check warnings when
+ * longest match routines access bytes past the input. This is then
+ * updated to the new high water mark.
+ */
+
} FAR deflate_state;
/* Output a byte on the stream.
@@ -272,14 +285,18 @@ typedef struct internal_state {
* distances are limited to MAX_DIST instead of WSIZE.
*/
+#define WIN_INIT MAX_MATCH
+/* Number of bytes after end of data in window to initialize in order to avoid
+ memory checker errors from longest match routines */
+
/* in trees.c */
-void _tr_init OF((deflate_state *s));
-int _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
-void _tr_flush_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
-void _tr_align OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
- int eof));
+void ZLIB_INTERNAL _tr_init OF((deflate_state *s));
+int ZLIB_INTERNAL _tr_tally OF((deflate_state *s, unsigned dist, unsigned lc));
+void ZLIB_INTERNAL _tr_flush_block OF((deflate_state *s, charf *buf,
+ ulg stored_len, int last));
+void ZLIB_INTERNAL _tr_align OF((deflate_state *s));
+void ZLIB_INTERNAL _tr_stored_block OF((deflate_state *s, charf *buf,
+ ulg stored_len, int last));
#define d_code(dist) \
((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
@@ -288,15 +305,15 @@ void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
* used.
*/
-#ifndef DEBUG_ZLIB
+#ifndef DEBUG
/* Inline versions of _tr_tally for speed: */
#if defined(GEN_TREES_H) || !defined(STDC)
- extern uch _length_code[];
- extern uch _dist_code[];
+ extern uch ZLIB_INTERNAL _length_code[];
+ extern uch ZLIB_INTERNAL _dist_code[];
#else
- extern const uch _length_code[];
- extern const uch _dist_code[];
+ extern const uch ZLIB_INTERNAL _length_code[];
+ extern const uch ZLIB_INTERNAL _dist_code[];
#endif
# define _tr_tally_lit(s, c, flush) \
diff --git a/com32/lib/zlib/infback.c b/com32/lib/zlib/infback.c
index 110b03b..af3a8c9 100644
--- a/com32/lib/zlib/infback.c
+++ b/com32/lib/zlib/infback.c
@@ -1,5 +1,5 @@
/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2009 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -26,7 +26,7 @@ local void fixedtables OF((struct inflate_state FAR *state));
window and output buffer that is 2**windowBits bytes.
*/
int ZEXPORT inflateBackInit_(strm, windowBits, window, version, stream_size)
-z_stream FAR *strm;
+z_streamp strm;
int windowBits;
unsigned char FAR *window;
const char *version;
@@ -50,11 +50,12 @@ int stream_size;
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
- strm->state = (voidpf)state;
+ strm->state = (struct internal_state FAR *)state;
+ state->dmax = 32768U;
state->wbits = windowBits;
state->wsize = 1U << windowBits;
state->window = window;
- state->write = 0;
+ state->wnext = 0;
state->whave = 0;
return Z_OK;
}
@@ -238,7 +239,7 @@ struct inflate_state FAR *state;
are not correct, i.e. strm is Z_NULL or the state was not initialized.
*/
int ZEXPORT inflateBack(strm, in, in_desc, out, out_desc)
-z_stream FAR *strm;
+z_streamp strm;
in_func in;
void FAR *in_desc;
out_func out;
@@ -252,7 +253,7 @@ void FAR *out_desc;
unsigned bits; /* bits in bit buffer */
unsigned copy; /* number of stored or match bytes to copy */
unsigned char FAR *from; /* where to copy match bytes from */
- code this; /* current decoding table entry */
+ code here; /* current decoding table entry */
code last; /* parent table entry */
unsigned len; /* length to copy for repeats, bits to drop */
int ret; /* return code */
@@ -388,19 +389,19 @@ void FAR *out_desc;
state->have = 0;
while (state->have < state->nlen + state->ndist) {
for (;;) {
- this = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(this.bits) <= bits) break;
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
- if (this.val < 16) {
- NEEDBITS(this.bits);
- DROPBITS(this.bits);
- state->lens[state->have++] = this.val;
+ if (here.val < 16) {
+ NEEDBITS(here.bits);
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
}
else {
- if (this.val == 16) {
- NEEDBITS(this.bits + 2);
- DROPBITS(this.bits);
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
if (state->have == 0) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
@@ -410,16 +411,16 @@ void FAR *out_desc;
copy = 3 + BITS(2);
DROPBITS(2);
}
- else if (this.val == 17) {
- NEEDBITS(this.bits + 3);
- DROPBITS(this.bits);
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
len = 0;
copy = 3 + BITS(3);
DROPBITS(3);
}
else {
- NEEDBITS(this.bits + 7);
- DROPBITS(this.bits);
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
len = 0;
copy = 11 + BITS(7);
DROPBITS(7);
@@ -434,7 +435,19 @@ void FAR *out_desc;
}
}
- /* build code tables */
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 9;
@@ -470,28 +483,28 @@ void FAR *out_desc;
/* get a literal, length, or end-of-block code */
for (;;) {
- this = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(this.bits) <= bits) break;
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
- if (this.op && (this.op & 0xf0) == 0) {
- last = this;
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
for (;;) {
- this = state->lencode[last.val +
+ here = state->lencode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + this.bits) <= bits) break;
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
- DROPBITS(this.bits);
- state->length = (unsigned)this.val;
+ DROPBITS(here.bits);
+ state->length = (unsigned)here.val;
/* process literal */
- if (this.op == 0) {
- Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ if (here.op == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
"inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", this.val));
+ "inflate: literal 0x%02x\n", here.val));
ROOM();
*put++ = (unsigned char)(state->length);
left--;
@@ -500,21 +513,21 @@ void FAR *out_desc;
}
/* process end of block */
- if (this.op & 32) {
+ if (here.op & 32) {
Tracevv((stderr, "inflate: end of block\n"));
state->mode = TYPE;
break;
}
/* invalid code */
- if (this.op & 64) {
+ if (here.op & 64) {
strm->msg = (char *)"invalid literal/length code";
state->mode = BAD;
break;
}
/* length code -- get extra bits, if any */
- state->extra = (unsigned)(this.op) & 15;
+ state->extra = (unsigned)(here.op) & 15;
if (state->extra != 0) {
NEEDBITS(state->extra);
state->length += BITS(state->extra);
@@ -524,30 +537,30 @@ void FAR *out_desc;
/* get distance code */
for (;;) {
- this = state->distcode[BITS(state->distbits)];
- if ((unsigned)(this.bits) <= bits) break;
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
- if ((this.op & 0xf0) == 0) {
- last = this;
+ if ((here.op & 0xf0) == 0) {
+ last = here;
for (;;) {
- this = state->distcode[last.val +
+ here = state->distcode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + this.bits) <= bits) break;
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
}
- DROPBITS(this.bits);
- if (this.op & 64) {
+ DROPBITS(here.bits);
+ if (here.op & 64) {
strm->msg = (char *)"invalid distance code";
state->mode = BAD;
break;
}
- state->offset = (unsigned)this.val;
+ state->offset = (unsigned)here.val;
/* get distance extra bits, if any */
- state->extra = (unsigned)(this.op) & 15;
+ state->extra = (unsigned)(here.op) & 15;
if (state->extra != 0) {
NEEDBITS(state->extra);
state->offset += BITS(state->extra);
@@ -608,7 +621,7 @@ void FAR *out_desc;
}
int ZEXPORT inflateBackEnd(strm)
-z_stream FAR *strm;
+z_streamp strm;
{
if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
return Z_STREAM_ERROR;
diff --git a/com32/lib/zlib/inffast.c b/com32/lib/zlib/inffast.c
index c716440..2f1d60b 100644
--- a/com32/lib/zlib/inffast.c
+++ b/com32/lib/zlib/inffast.c
@@ -1,5 +1,5 @@
/* inffast.c -- fast decoding
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2008, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -19,7 +19,7 @@
- none
No measurable difference:
- Pentium III (Anderson)
- - 68060 (Nikl)
+ - M68060 (Nikl)
*/
#ifdef POSTINC
# define OFF 0
@@ -64,7 +64,7 @@
requires strm->avail_out >= 258 for each loop to avoid checking for
output space.
*/
-void inflate_fast(strm, start)
+void ZLIB_INTERNAL inflate_fast(strm, start)
z_streamp strm;
unsigned start; /* inflate()'s starting value for strm->avail_out */
{
@@ -74,9 +74,12 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
unsigned char FAR *out; /* local strm->next_out */
unsigned char FAR *beg; /* inflate()'s initial strm->next_out */
unsigned char FAR *end; /* while out < end, enough space available */
+#ifdef INFLATE_STRICT
+ unsigned dmax; /* maximum distance from zlib header */
+#endif
unsigned wsize; /* window size or zero if not using window */
unsigned whave; /* valid bytes in the window */
- unsigned write; /* window write index */
+ unsigned wnext; /* window write index */
unsigned char FAR *window; /* allocated sliding window, if wsize != 0 */
unsigned long hold; /* local strm->hold */
unsigned bits; /* local strm->bits */
@@ -84,7 +87,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
code const FAR *dcode; /* local strm->distcode */
unsigned lmask; /* mask for first level of length codes */
unsigned dmask; /* mask for first level of distance codes */
- code this; /* retrieved table entry */
+ code here; /* retrieved table entry */
unsigned op; /* code bits, operation, extra bits, or */
/* window position, window bytes to copy */
unsigned len; /* match length, unused bytes */
@@ -98,9 +101,12 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
out = strm->next_out - OFF;
beg = out - (start - strm->avail_out);
end = out + (strm->avail_out - 257);
+#ifdef INFLATE_STRICT
+ dmax = state->dmax;
+#endif
wsize = state->wsize;
whave = state->whave;
- write = state->write;
+ wnext = state->wnext;
window = state->window;
hold = state->hold;
bits = state->bits;
@@ -118,20 +124,20 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
}
- this = lcode[hold & lmask];
+ here = lcode[hold & lmask];
dolen:
- op = (unsigned)(this.bits);
+ op = (unsigned)(here.bits);
hold >>= op;
bits -= op;
- op = (unsigned)(this.op);
+ op = (unsigned)(here.op);
if (op == 0) { /* literal */
- Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
"inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", this.val));
- PUP(out) = (unsigned char)(this.val);
+ "inflate: literal 0x%02x\n", here.val));
+ PUP(out) = (unsigned char)(here.val);
}
else if (op & 16) { /* length base */
- len = (unsigned)(this.val);
+ len = (unsigned)(here.val);
op &= 15; /* number of extra bits */
if (op) {
if (bits < op) {
@@ -149,14 +155,14 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
hold += (unsigned long)(PUP(in)) << bits;
bits += 8;
}
- this = dcode[hold & dmask];
+ here = dcode[hold & dmask];
dodist:
- op = (unsigned)(this.bits);
+ op = (unsigned)(here.bits);
hold >>= op;
bits -= op;
- op = (unsigned)(this.op);
+ op = (unsigned)(here.op);
if (op & 16) { /* distance base */
- dist = (unsigned)(this.val);
+ dist = (unsigned)(here.val);
op &= 15; /* number of extra bits */
if (bits < op) {
hold += (unsigned long)(PUP(in)) << bits;
@@ -167,6 +173,13 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
}
}
dist += (unsigned)hold & ((1U << op) - 1);
+#ifdef INFLATE_STRICT
+ if (dist > dmax) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#endif
hold >>= op;
bits -= op;
Tracevv((stderr, "inflate: distance %u\n", dist));
@@ -174,12 +187,34 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
if (dist > op) { /* see if copy from window */
op = dist - op; /* distance back in window */
if (op > whave) {
- strm->msg = (char *)"invalid distance too far back";
- state->mode = BAD;
- break;
+ if (state->sane) {
+ strm->msg =
+ (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ if (len <= op - whave) {
+ do {
+ PUP(out) = 0;
+ } while (--len);
+ continue;
+ }
+ len -= op - whave;
+ do {
+ PUP(out) = 0;
+ } while (--op > whave);
+ if (op == 0) {
+ from = out - dist;
+ do {
+ PUP(out) = PUP(from);
+ } while (--len);
+ continue;
+ }
+#endif
}
from = window - OFF;
- if (write == 0) { /* very common case */
+ if (wnext == 0) { /* very common case */
from += wsize - op;
if (op < len) { /* some from window */
len -= op;
@@ -189,17 +224,17 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
from = out - dist; /* rest from output */
}
}
- else if (write < op) { /* wrap around window */
- from += wsize + write - op;
- op -= write;
+ else if (wnext < op) { /* wrap around window */
+ from += wsize + wnext - op;
+ op -= wnext;
if (op < len) { /* some from end of window */
len -= op;
do {
PUP(out) = PUP(from);
} while (--op);
from = window - OFF;
- if (write < len) { /* some from start of window */
- op = write;
+ if (wnext < len) { /* some from start of window */
+ op = wnext;
len -= op;
do {
PUP(out) = PUP(from);
@@ -209,7 +244,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
}
}
else { /* contiguous in window */
- from += write - op;
+ from += wnext - op;
if (op < len) { /* some from window */
len -= op;
do {
@@ -246,7 +281,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
}
}
else if ((op & 64) == 0) { /* 2nd level distance code */
- this = dcode[this.val + (hold & ((1U << op) - 1))];
+ here = dcode[here.val + (hold & ((1U << op) - 1))];
goto dodist;
}
else {
@@ -256,7 +291,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
}
}
else if ((op & 64) == 0) { /* 2nd level length code */
- this = lcode[this.val + (hold & ((1U << op) - 1))];
+ here = lcode[here.val + (hold & ((1U << op) - 1))];
goto dolen;
}
else if (op & 32) { /* end-of-block */
@@ -292,7 +327,7 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */
inflate_fast() speedups that turned out slower (on a PowerPC G3 750CXe):
- Using bit fields for code structure
- Different op definition to avoid & for extra bits (do & for table bits)
- - Three separate decoding do-loops for direct, window, and write == 0
+ - Three separate decoding do-loops for direct, window, and wnext == 0
- Special case for distance > 1 copies to do overlapped load and store copy
- Explicit branch predictions (based on measured branch probabilities)
- Deferring match copy and interspersed it with decoding subsequent codes
diff --git a/com32/lib/zlib/inffast.h b/com32/lib/zlib/inffast.h
index 1e88d2d..e5c1aa4 100644
--- a/com32/lib/zlib/inffast.h
+++ b/com32/lib/zlib/inffast.h
@@ -1,5 +1,5 @@
/* inffast.h -- header to use inffast.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2003, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -8,4 +8,4 @@
subject to change. Applications should only use zlib.h.
*/
-void inflate_fast OF((z_streamp strm, unsigned start));
+void ZLIB_INTERNAL inflate_fast OF((z_streamp strm, unsigned start));
diff --git a/com32/lib/zlib/inflate.c b/com32/lib/zlib/inflate.c
index a53b5c7..a8431ab 100644
--- a/com32/lib/zlib/inflate.c
+++ b/com32/lib/zlib/inflate.c
@@ -1,5 +1,5 @@
/* inflate.c -- zlib decompression
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -45,7 +45,7 @@
* - Rearrange window copies in inflate_fast() for speed and simplification
* - Unroll last copy for window match in inflate_fast()
* - Use local copies of window variables in inflate_fast() for speed
- * - Pull out common write == 0 case for speed in inflate_fast()
+ * - Pull out common wnext == 0 case for speed in inflate_fast()
* - Make op and len in inflate_fast() unsigned for consistency
* - Add FAR to lcode and dcode declarations in inflate_fast()
* - Simplified bad distance check in inflate_fast()
@@ -109,24 +109,69 @@ z_streamp strm;
state = (struct inflate_state FAR *)strm->state;
strm->total_in = strm->total_out = state->total = 0;
strm->msg = Z_NULL;
+ strm->adler = 1; /* to support ill-conceived Java test suite */
state->mode = HEAD;
state->last = 0;
state->havedict = 0;
+ state->dmax = 32768U;
+ state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
+ state->wnext = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
+ state->sane = 1;
+ state->back = -1;
Tracev((stderr, "inflate: reset\n"));
return Z_OK;
}
+int ZEXPORT inflateReset2(strm, windowBits)
+z_streamp strm;
+int windowBits;
+{
+ int wrap;
+ struct inflate_state FAR *state;
+
+ /* get the state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+
+ /* extract wrap request from windowBits parameter */
+ if (windowBits < 0) {
+ wrap = 0;
+ windowBits = -windowBits;
+ }
+ else {
+ wrap = (windowBits >> 4) + 1;
+#ifdef GUNZIP
+ if (windowBits < 48)
+ windowBits &= 15;
+#endif
+ }
+
+ /* set number of window bits, free window if different */
+ if (windowBits && (windowBits < 8 || windowBits > 15))
+ return Z_STREAM_ERROR;
+ if (state->window != Z_NULL && state->wbits != (unsigned)windowBits) {
+ ZFREE(strm, state->window);
+ state->window = Z_NULL;
+ }
+
+ /* update state and reset the rest of it */
+ state->wrap = wrap;
+ state->wbits = (unsigned)windowBits;
+ return inflateReset(strm);
+}
+
int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
z_streamp strm;
int windowBits;
const char *version;
int stream_size;
{
+ int ret;
struct inflate_state FAR *state;
if (version == Z_NULL || version[0] != ZLIB_VERSION[0] ||
@@ -143,25 +188,14 @@ int stream_size;
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
- strm->state = (voidpf)state;
- if (windowBits < 0) {
- state->wrap = 0;
- windowBits = -windowBits;
- }
- else {
- state->wrap = (windowBits >> 4) + 1;
-#ifdef GUNZIP
- if (windowBits < 48) windowBits &= 15;
-#endif
- }
- if (windowBits < 8 || windowBits > 15) {
+ strm->state = (struct internal_state FAR *)state;
+ state->window = Z_NULL;
+ ret = inflateReset2(strm, windowBits);
+ if (ret != Z_OK) {
ZFREE(strm, state);
strm->state = Z_NULL;
- return Z_STREAM_ERROR;
}
- state->wbits = (unsigned)windowBits;
- state->window = Z_NULL;
- return inflateReset(strm);
+ return ret;
}
int ZEXPORT inflateInit_(strm, version, stream_size)
@@ -172,6 +206,27 @@ int stream_size;
return inflateInit2_(strm, DEF_WBITS, version, stream_size);
}
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits < 0) {
+ state->hold = 0;
+ state->bits = 0;
+ return Z_OK;
+ }
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+
/*
Return state with length and distance decoding tables and index sizes set to
fixed code decoding. Normally this returns fixed tables from inffixed.h.
@@ -320,7 +375,7 @@ unsigned out;
/* if window not in use yet, initialize */
if (state->wsize == 0) {
state->wsize = 1U << state->wbits;
- state->write = 0;
+ state->wnext = 0;
state->whave = 0;
}
@@ -328,22 +383,22 @@ unsigned out;
copy = out - strm->avail_out;
if (copy >= state->wsize) {
zmemcpy(state->window, strm->next_out - state->wsize, state->wsize);
- state->write = 0;
+ state->wnext = 0;
state->whave = state->wsize;
}
else {
- dist = state->wsize - state->write;
+ dist = state->wsize - state->wnext;
if (dist > copy) dist = copy;
- zmemcpy(state->window + state->write, strm->next_out - copy, dist);
+ zmemcpy(state->window + state->wnext, strm->next_out - copy, dist);
copy -= dist;
if (copy) {
zmemcpy(state->window, strm->next_out - copy, copy);
- state->write = copy;
+ state->wnext = copy;
state->whave = state->wsize;
}
else {
- state->write += dist;
- if (state->write == state->wsize) state->write = 0;
+ state->wnext += dist;
+ if (state->wnext == state->wsize) state->wnext = 0;
if (state->whave < state->wsize) state->whave += dist;
}
}
@@ -544,7 +599,7 @@ int flush;
unsigned in, out; /* save starting available input and output */
unsigned copy; /* number of stored or match bytes to copy */
unsigned char FAR *from; /* where to copy match bytes from */
- code this; /* current decoding table entry */
+ code here; /* current decoding table entry */
code last; /* parent table entry */
unsigned len; /* length to copy for repeats, bits to drop */
int ret; /* return code */
@@ -581,6 +636,8 @@ int flush;
break;
}
state->flags = 0; /* expect zlib header */
+ if (state->head != Z_NULL)
+ state->head->done = -1;
if (!(state->wrap & 1) || /* check if zlib header allowed */
#else
if (
@@ -596,11 +653,15 @@ int flush;
break;
}
DROPBITS(4);
- if (BITS(4) + 8 > state->wbits) {
+ len = BITS(4) + 8;
+ if (state->wbits == 0)
+ state->wbits = len;
+ else if (len > state->wbits) {
strm->msg = (char *)"invalid window size";
state->mode = BAD;
break;
}
+ state->dmax = 1U << len;
Tracev((stderr, "inflate: zlib header ok\n"));
strm->adler = state->check = adler32(0L, Z_NULL, 0);
state->mode = hold & 0x200 ? DICTID : TYPE;
@@ -620,16 +681,24 @@ int flush;
state->mode = BAD;
break;
}
+ if (state->head != Z_NULL)
+ state->head->text = (int)((hold >> 8) & 1);
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
state->mode = TIME;
case TIME:
NEEDBITS(32);
+ if (state->head != Z_NULL)
+ state->head->time = hold;
if (state->flags & 0x0200) CRC4(state->check, hold);
INITBITS();
state->mode = OS;
case OS:
NEEDBITS(16);
+ if (state->head != Z_NULL) {
+ state->head->xflags = (int)(hold & 0xff);
+ state->head->os = (int)(hold >> 8);
+ }
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
state->mode = EXLEN;
@@ -637,15 +706,26 @@ int flush;
if (state->flags & 0x0400) {
NEEDBITS(16);
state->length = (unsigned)(hold);
+ if (state->head != Z_NULL)
+ state->head->extra_len = (unsigned)hold;
if (state->flags & 0x0200) CRC2(state->check, hold);
INITBITS();
}
+ else if (state->head != Z_NULL)
+ state->head->extra = Z_NULL;
state->mode = EXTRA;
case EXTRA:
if (state->flags & 0x0400) {
copy = state->length;
if (copy > have) copy = have;
if (copy) {
+ if (state->head != Z_NULL &&
+ state->head->extra != Z_NULL) {
+ len = state->head->extra_len - state->length;
+ zmemcpy(state->head->extra + len, next,
+ len + copy > state->head->extra_max ?
+ state->head->extra_max - len : copy);
+ }
if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
@@ -654,6 +734,7 @@ int flush;
}
if (state->length) goto inf_leave;
}
+ state->length = 0;
state->mode = NAME;
case NAME:
if (state->flags & 0x0800) {
@@ -661,13 +742,20 @@ int flush;
copy = 0;
do {
len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->name != Z_NULL &&
+ state->length < state->head->name_max)
+ state->head->name[state->length++] = len;
} while (len && copy < have);
- if (state->flags & 0x02000)
+ if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
if (len) goto inf_leave;
}
+ else if (state->head != Z_NULL)
+ state->head->name = Z_NULL;
+ state->length = 0;
state->mode = COMMENT;
case COMMENT:
if (state->flags & 0x1000) {
@@ -675,13 +763,19 @@ int flush;
copy = 0;
do {
len = (unsigned)(next[copy++]);
+ if (state->head != Z_NULL &&
+ state->head->comment != Z_NULL &&
+ state->length < state->head->comm_max)
+ state->head->comment[state->length++] = len;
} while (len && copy < have);
- if (state->flags & 0x02000)
+ if (state->flags & 0x0200)
state->check = crc32(state->check, next, copy);
have -= copy;
next += copy;
if (len) goto inf_leave;
}
+ else if (state->head != Z_NULL)
+ state->head->comment = Z_NULL;
state->mode = HCRC;
case HCRC:
if (state->flags & 0x0200) {
@@ -693,6 +787,10 @@ int flush;
}
INITBITS();
}
+ if (state->head != Z_NULL) {
+ state->head->hcrc = (int)((state->flags >> 9) & 1);
+ state->head->done = 1;
+ }
strm->adler = state->check = crc32(0L, Z_NULL, 0);
state->mode = TYPE;
break;
@@ -710,7 +808,7 @@ int flush;
strm->adler = state->check = adler32(0L, Z_NULL, 0);
state->mode = TYPE;
case TYPE:
- if (flush == Z_BLOCK) goto inf_leave;
+ if (flush == Z_BLOCK || flush == Z_TREES) goto inf_leave;
case TYPEDO:
if (state->last) {
BYTEBITS();
@@ -730,7 +828,11 @@ int flush;
fixedtables(state);
Tracev((stderr, "inflate: fixed codes block%s\n",
state->last ? " (last)" : ""));
- state->mode = LEN; /* decode codes */
+ state->mode = LEN_; /* decode codes */
+ if (flush == Z_TREES) {
+ DROPBITS(2);
+ goto inf_leave;
+ }
break;
case 2: /* dynamic block */
Tracev((stderr, "inflate: dynamic codes block%s\n",
@@ -755,6 +857,9 @@ int flush;
Tracev((stderr, "inflate: stored length %u\n",
state->length));
INITBITS();
+ state->mode = COPY_;
+ if (flush == Z_TREES) goto inf_leave;
+ case COPY_:
state->mode = COPY;
case COPY:
copy = state->length;
@@ -815,19 +920,19 @@ int flush;
case CODELENS:
while (state->have < state->nlen + state->ndist) {
for (;;) {
- this = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(this.bits) <= bits) break;
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
- if (this.val < 16) {
- NEEDBITS(this.bits);
- DROPBITS(this.bits);
- state->lens[state->have++] = this.val;
+ if (here.val < 16) {
+ NEEDBITS(here.bits);
+ DROPBITS(here.bits);
+ state->lens[state->have++] = here.val;
}
else {
- if (this.val == 16) {
- NEEDBITS(this.bits + 2);
- DROPBITS(this.bits);
+ if (here.val == 16) {
+ NEEDBITS(here.bits + 2);
+ DROPBITS(here.bits);
if (state->have == 0) {
strm->msg = (char *)"invalid bit length repeat";
state->mode = BAD;
@@ -837,16 +942,16 @@ int flush;
copy = 3 + BITS(2);
DROPBITS(2);
}
- else if (this.val == 17) {
- NEEDBITS(this.bits + 3);
- DROPBITS(this.bits);
+ else if (here.val == 17) {
+ NEEDBITS(here.bits + 3);
+ DROPBITS(here.bits);
len = 0;
copy = 3 + BITS(3);
DROPBITS(3);
}
else {
- NEEDBITS(this.bits + 7);
- DROPBITS(this.bits);
+ NEEDBITS(here.bits + 7);
+ DROPBITS(here.bits);
len = 0;
copy = 11 + BITS(7);
DROPBITS(7);
@@ -861,7 +966,19 @@ int flush;
}
}
- /* build code tables */
+ /* handle error breaks in while */
+ if (state->mode == BAD) break;
+
+ /* check for end-of-block code (better have one) */
+ if (state->lens[256] == 0) {
+ strm->msg = (char *)"invalid code -- missing end-of-block";
+ state->mode = BAD;
+ break;
+ }
+
+ /* build code tables -- note: do not change the lenbits or distbits
+ values here (9 and 6) without reading the comments in inftrees.h
+ concerning the ENOUGH constants, which depend on those values */
state->next = state->codes;
state->lencode = (code const FAR *)(state->next);
state->lenbits = 9;
@@ -882,94 +999,110 @@ int flush;
break;
}
Tracev((stderr, "inflate: codes ok\n"));
+ state->mode = LEN_;
+ if (flush == Z_TREES) goto inf_leave;
+ case LEN_:
state->mode = LEN;
case LEN:
if (have >= 6 && left >= 258) {
RESTORE();
inflate_fast(strm, out);
LOAD();
+ if (state->mode == TYPE)
+ state->back = -1;
break;
}
+ state->back = 0;
for (;;) {
- this = state->lencode[BITS(state->lenbits)];
- if ((unsigned)(this.bits) <= bits) break;
+ here = state->lencode[BITS(state->lenbits)];
+ if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
- if (this.op && (this.op & 0xf0) == 0) {
- last = this;
+ if (here.op && (here.op & 0xf0) == 0) {
+ last = here;
for (;;) {
- this = state->lencode[last.val +
+ here = state->lencode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + this.bits) <= bits) break;
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
+ state->back += last.bits;
}
- DROPBITS(this.bits);
- state->length = (unsigned)this.val;
- if ((int)(this.op) == 0) {
- Tracevv((stderr, this.val >= 0x20 && this.val < 0x7f ?
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ state->length = (unsigned)here.val;
+ if ((int)(here.op) == 0) {
+ Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ?
"inflate: literal '%c'\n" :
- "inflate: literal 0x%02x\n", this.val));
+ "inflate: literal 0x%02x\n", here.val));
state->mode = LIT;
break;
}
- if (this.op & 32) {
+ if (here.op & 32) {
Tracevv((stderr, "inflate: end of block\n"));
+ state->back = -1;
state->mode = TYPE;
break;
}
- if (this.op & 64) {
+ if (here.op & 64) {
strm->msg = (char *)"invalid literal/length code";
state->mode = BAD;
break;
}
- state->extra = (unsigned)(this.op) & 15;
+ state->extra = (unsigned)(here.op) & 15;
state->mode = LENEXT;
case LENEXT:
if (state->extra) {
NEEDBITS(state->extra);
state->length += BITS(state->extra);
DROPBITS(state->extra);
+ state->back += state->extra;
}
Tracevv((stderr, "inflate: length %u\n", state->length));
+ state->was = state->length;
state->mode = DIST;
case DIST:
for (;;) {
- this = state->distcode[BITS(state->distbits)];
- if ((unsigned)(this.bits) <= bits) break;
+ here = state->distcode[BITS(state->distbits)];
+ if ((unsigned)(here.bits) <= bits) break;
PULLBYTE();
}
- if ((this.op & 0xf0) == 0) {
- last = this;
+ if ((here.op & 0xf0) == 0) {
+ last = here;
for (;;) {
- this = state->distcode[last.val +
+ here = state->distcode[last.val +
(BITS(last.bits + last.op) >> last.bits)];
- if ((unsigned)(last.bits + this.bits) <= bits) break;
+ if ((unsigned)(last.bits + here.bits) <= bits) break;
PULLBYTE();
}
DROPBITS(last.bits);
+ state->back += last.bits;
}
- DROPBITS(this.bits);
- if (this.op & 64) {
+ DROPBITS(here.bits);
+ state->back += here.bits;
+ if (here.op & 64) {
strm->msg = (char *)"invalid distance code";
state->mode = BAD;
break;
}
- state->offset = (unsigned)this.val;
- state->extra = (unsigned)(this.op) & 15;
+ state->offset = (unsigned)here.val;
+ state->extra = (unsigned)(here.op) & 15;
state->mode = DISTEXT;
case DISTEXT:
if (state->extra) {
NEEDBITS(state->extra);
state->offset += BITS(state->extra);
DROPBITS(state->extra);
+ state->back += state->extra;
}
- if (state->offset > state->whave + out - left) {
+#ifdef INFLATE_STRICT
+ if (state->offset > state->dmax) {
strm->msg = (char *)"invalid distance too far back";
state->mode = BAD;
break;
}
+#endif
Tracevv((stderr, "inflate: distance %u\n", state->offset));
state->mode = MATCH;
case MATCH:
@@ -977,12 +1110,32 @@ int flush;
copy = out - left;
if (state->offset > copy) { /* copy from window */
copy = state->offset - copy;
- if (copy > state->write) {
- copy -= state->write;
+ if (copy > state->whave) {
+ if (state->sane) {
+ strm->msg = (char *)"invalid distance too far back";
+ state->mode = BAD;
+ break;
+ }
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
+ Trace((stderr, "inflate.c too far\n"));
+ copy -= state->whave;
+ if (copy > state->length) copy = state->length;
+ if (copy > left) copy = left;
+ left -= copy;
+ state->length -= copy;
+ do {
+ *put++ = 0;
+ } while (--copy);
+ if (state->length == 0) state->mode = LEN;
+ break;
+#endif
+ }
+ if (copy > state->wnext) {
+ copy -= state->wnext;
from = state->window + (state->wsize - copy);
}
else
- from = state->window + (state->write - copy);
+ from = state->window + (state->wnext - copy);
if (copy > state->length) copy = state->length;
}
else { /* copy from output */
@@ -1075,7 +1228,8 @@ int flush;
strm->adler = state->check =
UPDATE(state->check, strm->next_out - out, out);
strm->data_type = state->bits + (state->last ? 64 : 0) +
- (state->mode == TYPE ? 128 : 0);
+ (state->mode == TYPE ? 128 : 0) +
+ (state->mode == LEN_ || state->mode == COPY_ ? 256 : 0);
if (((in == 0 && out == 0) || flush == Z_FINISH) && ret == Z_OK)
ret = Z_BUF_ERROR;
return ret;
@@ -1106,12 +1260,16 @@ uInt dictLength;
/* check state */
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
- if (state->mode != DICT) return Z_STREAM_ERROR;
+ if (state->wrap != 0 && state->mode != DICT)
+ return Z_STREAM_ERROR;
/* check for correct dictionary id */
- id = adler32(0L, Z_NULL, 0);
- id = adler32(id, dictionary, dictLength);
- if (id != state->check) return Z_DATA_ERROR;
+ if (state->mode == DICT) {
+ id = adler32(0L, Z_NULL, 0);
+ id = adler32(id, dictionary, dictLength);
+ if (id != state->check)
+ return Z_DATA_ERROR;
+ }
/* copy dictionary to window */
if (updatewindow(strm, strm->avail_out)) {
@@ -1133,6 +1291,23 @@ uInt dictLength;
return Z_OK;
}
+int ZEXPORT inflateGetHeader(strm, head)
+z_streamp strm;
+gz_headerp head;
+{
+ struct inflate_state FAR *state;
+
+ /* check state */
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if ((state->wrap & 2) == 0) return Z_STREAM_ERROR;
+
+ /* save header structure */
+ state->head = head;
+ head->done = 0;
+ return Z_OK;
+}
+
/*
Search buf[0..len-1] for the pattern: 0, 0, 0xff, 0xff. Return when found
or when out of input. When called, *have is the number of pattern bytes
@@ -1235,6 +1410,7 @@ z_streamp source;
struct inflate_state FAR *state;
struct inflate_state FAR *copy;
unsigned char FAR *window;
+ unsigned wsize;
/* check input */
if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
@@ -1257,14 +1433,48 @@ z_streamp source;
}
/* copy state */
- *dest = *source;
- *copy = *state;
- copy->lencode = copy->codes + (state->lencode - state->codes);
- copy->distcode = copy->codes + (state->distcode - state->codes);
+ zmemcpy(dest, source, sizeof(z_stream));
+ zmemcpy(copy, state, sizeof(struct inflate_state));
+ if (state->lencode >= state->codes &&
+ state->lencode <= state->codes + ENOUGH - 1) {
+ copy->lencode = copy->codes + (state->lencode - state->codes);
+ copy->distcode = copy->codes + (state->distcode - state->codes);
+ }
copy->next = copy->codes + (state->next - state->codes);
- if (window != Z_NULL)
- zmemcpy(window, state->window, 1U << state->wbits);
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
copy->window = window;
- dest->state = (voidpf)copy;
+ dest->state = (struct internal_state FAR *)copy;
+ return Z_OK;
+}
+
+int ZEXPORT inflateUndermine(strm, subvert)
+z_streamp strm;
+int subvert;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ state->sane = !subvert;
+#ifdef INFLATE_ALLOW_INVALID_DISTANCE_TOOFAR_ARRR
return Z_OK;
+#else
+ state->sane = 1;
+ return Z_DATA_ERROR;
+#endif
+}
+
+long ZEXPORT inflateMark(strm)
+z_streamp strm;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return -1L << 16;
+ state = (struct inflate_state FAR *)strm->state;
+ return ((long)(state->back) << 16) +
+ (state->mode == COPY ? state->length :
+ (state->mode == MATCH ? state->was - state->length : 0));
}
diff --git a/com32/lib/zlib/inflate.h b/com32/lib/zlib/inflate.h
index 9a12c8f..95f4986 100644
--- a/com32/lib/zlib/inflate.h
+++ b/com32/lib/zlib/inflate.h
@@ -1,5 +1,5 @@
/* inflate.h -- internal inflate state definition
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2009 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -19,7 +19,6 @@
/* Possible inflate modes between inflate() calls */
typedef enum {
HEAD, /* i: waiting for magic header */
-#ifdef GUNZIP
FLAGS, /* i: waiting for method and flags (gzip) */
TIME, /* i: waiting for modification time (gzip) */
OS, /* i: waiting for extra flags and operating system (gzip) */
@@ -28,26 +27,25 @@ typedef enum {
NAME, /* i: waiting for end of file name (gzip) */
COMMENT, /* i: waiting for end of comment (gzip) */
HCRC, /* i: waiting for header crc (gzip) */
-#endif
DICTID, /* i: waiting for dictionary check value */
DICT, /* waiting for inflateSetDictionary() call */
TYPE, /* i: waiting for type bits, including last-flag bit */
TYPEDO, /* i: same, but skip check to exit inflate on new block */
STORED, /* i: waiting for stored size (length and complement) */
+ COPY_, /* i/o: same as COPY below, but only first time in */
COPY, /* i/o: waiting for input or output to copy stored block */
TABLE, /* i: waiting for dynamic block table lengths */
LENLENS, /* i: waiting for code length code lengths */
CODELENS, /* i: waiting for length/lit and distance code lengths */
- LEN, /* i: waiting for length/lit code */
+ LEN_, /* i: same as LEN below, but only first time in */
+ LEN, /* i: waiting for length/lit/eob code */
LENEXT, /* i: waiting for length extra bits */
DIST, /* i: waiting for distance code */
DISTEXT, /* i: waiting for distance extra bits */
MATCH, /* o: waiting for output space to copy string */
LIT, /* o: waiting for output space to write literal */
CHECK, /* i: waiting for 32-bit check value */
-#ifdef GUNZIP
LENGTH, /* i: waiting for 32-bit length (gzip) */
-#endif
DONE, /* finished check, done -- remain here until reset */
BAD, /* got a data error -- remain here until reset */
MEM, /* got an inflate() memory error -- remain here until reset */
@@ -57,19 +55,21 @@ typedef enum {
/*
State transitions between above modes -
- (most modes can go to the BAD or MEM mode -- not shown for clarity)
+ (most modes can go to BAD or MEM on error -- not shown for clarity)
Process header:
- HEAD -> (gzip) or (zlib)
- (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME
- NAME -> COMMENT -> HCRC -> TYPE
+ HEAD -> (gzip) or (zlib) or (raw)
+ (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+ HCRC -> TYPE
(zlib) -> DICTID or TYPE
DICTID -> DICT -> TYPE
+ (raw) -> TYPEDO
Read deflate blocks:
- TYPE -> STORED or TABLE or LEN or CHECK
- STORED -> COPY -> TYPE
- TABLE -> LENLENS -> CODELENS -> LEN
- Read deflate codes:
+ TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+ STORED -> COPY_ -> COPY -> TYPE
+ TABLE -> LENLENS -> CODELENS -> LEN_
+ LEN_ -> LEN
+ Read deflate codes in fixed or dynamic block:
LEN -> LENEXT or LIT or TYPE
LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
LIT -> LEN
@@ -77,20 +77,22 @@ typedef enum {
CHECK -> LENGTH -> DONE
*/
-/* state maintained between inflate() calls. Approximately 7K bytes. */
+/* state maintained between inflate() calls. Approximately 10K bytes. */
struct inflate_state {
inflate_mode mode; /* current inflate mode */
int last; /* true if processing last block */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
int havedict; /* true if dictionary provided */
int flags; /* gzip header method and flags (0 if zlib) */
+ unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
unsigned long check; /* protected copy of check value */
unsigned long total; /* protected copy of output count */
+ gz_headerp head; /* where to save gzip header information */
/* sliding window */
unsigned wbits; /* log base 2 of requested window size */
unsigned wsize; /* window size or zero if not using window */
unsigned whave; /* valid bytes in the window */
- unsigned write; /* window write index */
+ unsigned wnext; /* window write index */
unsigned char FAR *window; /* allocated sliding window, if needed */
/* bit accumulator */
unsigned long hold; /* input bit accumulator */
@@ -114,4 +116,7 @@ struct inflate_state {
unsigned short lens[320]; /* temporary storage for code lengths */
unsigned short work[288]; /* work area for code table building */
code codes[ENOUGH]; /* space for code tables */
+ int sane; /* if false, allow invalid distance too far */
+ int back; /* bits back of last unprocessed length/lit */
+ unsigned was; /* initial length of match */
};
diff --git a/com32/lib/zlib/inftrees.c b/com32/lib/zlib/inftrees.c
index 3bb5639..11e9c52 100644
--- a/com32/lib/zlib/inftrees.c
+++ b/com32/lib/zlib/inftrees.c
@@ -1,5 +1,5 @@
/* inftrees.c -- generate Huffman trees for efficient decoding
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
- " inflate 1.2.1 Copyright 1995-2003 Mark Adler ";
+ " inflate 1.2.5 Copyright 1995-2010 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -29,7 +29,7 @@ const char inflate_copyright[] =
table index bits. It will differ if the request is greater than the
longest code or if it is less than the shortest code.
*/
-int inflate_table(type, lens, codes, table, bits, work)
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
codetype type;
unsigned short FAR *lens;
unsigned codes;
@@ -50,7 +50,7 @@ unsigned short FAR *work;
unsigned fill; /* index for replicating entries */
unsigned low; /* low bits for current root entry */
unsigned mask; /* mask for low root bits */
- code this; /* table entry for duplication */
+ code here; /* table entry for duplication */
code FAR *next; /* next available space in table */
const unsigned short FAR *base; /* base value table to use */
const unsigned short FAR *extra; /* extra bits table to use */
@@ -62,7 +62,7 @@ unsigned short FAR *work;
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 76, 66};
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 73, 195};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -114,8 +114,16 @@ unsigned short FAR *work;
for (max = MAXBITS; max >= 1; max--)
if (count[max] != 0) break;
if (root > max) root = max;
- if (max == 0) return -1; /* no codes! */
- for (min = 1; min <= MAXBITS; min++)
+ if (max == 0) { /* no symbols to code at all */
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)1;
+ here.val = (unsigned short)0;
+ *(*table)++ = here; /* make a table to force an error */
+ *(*table)++ = here;
+ *bits = 1;
+ return 0; /* no symbols, but wait for decoding to report error */
+ }
+ for (min = 1; min < max; min++)
if (count[min] != 0) break;
if (root < min) root = min;
@@ -126,7 +134,7 @@ unsigned short FAR *work;
left -= count[len];
if (left < 0) return -1; /* over-subscribed */
}
- if (left > 0 && (type == CODES || (codes - count[0] != 1)))
+ if (left > 0 && (type == CODES || max != 1))
return -1; /* incomplete set */
/* generate offsets into symbol table for each length for sorting */
@@ -158,11 +166,10 @@ unsigned short FAR *work;
entered in the tables.
used keeps track of how many table entries have been allocated from the
- provided *table space. It is checked when a LENS table is being made
- against the space in *table, ENOUGH, minus the maximum space needed by
- the worst case distance code, MAXD. This should never happen, but the
- sufficiency of ENOUGH has not been proven exhaustively, hence the check.
- This assumes that when type == LENS, bits == 9.
+ provided *table space. It is checked for LENS and DIST tables against
+ the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+ the initial root table size constants. See the comments in inftrees.h
+ for more information.
sym increments through all symbols, and the loop terminates when
all codes of length max, i.e. all codes, have been processed. This
@@ -201,32 +208,34 @@ unsigned short FAR *work;
mask = used - 1; /* mask for comparing low */
/* check available table space */
- if (type == LENS && used >= ENOUGH - MAXD)
+ if ((type == LENS && used >= ENOUGH_LENS) ||
+ (type == DISTS && used >= ENOUGH_DISTS))
return 1;
/* process all codes and make table entries */
for (;;) {
/* create table entry */
- this.bits = (unsigned char)(len - drop);
+ here.bits = (unsigned char)(len - drop);
if ((int)(work[sym]) < end) {
- this.op = (unsigned char)0;
- this.val = work[sym];
+ here.op = (unsigned char)0;
+ here.val = work[sym];
}
else if ((int)(work[sym]) > end) {
- this.op = (unsigned char)(extra[work[sym]]);
- this.val = base[work[sym]];
+ here.op = (unsigned char)(extra[work[sym]]);
+ here.val = base[work[sym]];
}
else {
- this.op = (unsigned char)(32 + 64); /* end of block */
- this.val = 0;
+ here.op = (unsigned char)(32 + 64); /* end of block */
+ here.val = 0;
}
/* replicate for those indices with low len bits equal to huff */
incr = 1U << (len - drop);
fill = 1U << curr;
+ min = fill; /* save offset to next table */
do {
fill -= incr;
- next[(huff >> drop) + fill] = this;
+ next[(huff >> drop) + fill] = here;
} while (fill != 0);
/* backwards increment the len-bit code huff */
@@ -254,7 +263,7 @@ unsigned short FAR *work;
drop = root;
/* increment past last table */
- next += 1U << curr;
+ next += min; /* here min is 1 << curr */
/* determine length of next table */
curr = len - drop;
@@ -268,7 +277,8 @@ unsigned short FAR *work;
/* check for enough space */
used += 1U << curr;
- if (type == LENS && used >= ENOUGH - MAXD)
+ if ((type == LENS && used >= ENOUGH_LENS) ||
+ (type == DISTS && used >= ENOUGH_DISTS))
return 1;
/* point entry in root table to sub-table */
@@ -286,21 +296,20 @@ unsigned short FAR *work;
through high index bits. When the current sub-table is filled, the loop
drops back to the root table to fill in any remaining entries there.
*/
- this.op = (unsigned char)64; /* invalid code marker */
- this.bits = (unsigned char)(len - drop);
- this.val = (unsigned short)0;
+ here.op = (unsigned char)64; /* invalid code marker */
+ here.bits = (unsigned char)(len - drop);
+ here.val = (unsigned short)0;
while (huff != 0) {
/* when done with sub-table, drop back to root table */
if (drop != 0 && (huff & mask) != low) {
drop = 0;
len = root;
next = *table;
- curr = root;
- this.bits = (unsigned char)len;
+ here.bits = (unsigned char)len;
}
/* put invalid code marker in table */
- next[huff >> drop] = this;
+ next[huff >> drop] = here;
/* backwards increment the len-bit code huff */
incr = 1U << (len - 1);
diff --git a/com32/lib/zlib/inftrees.h b/com32/lib/zlib/inftrees.h
index 82d365a..baa53a0 100644
--- a/com32/lib/zlib/inftrees.h
+++ b/com32/lib/zlib/inftrees.h
@@ -1,5 +1,5 @@
/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005, 2010 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -35,21 +35,28 @@ typedef struct {
01000000 - invalid code
*/
-/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1004 code structures (850 for length/literals
- and 154 for distances, the latter actually the result of an
- exhaustive search). The true maximum is not known, but the value
- below is more than safe. */
-#define ENOUGH 1440
-#define MAXD 154
+/* Maximum size of the dynamic table. The maximum number of code structures is
+ 1444, which is the sum of 852 for literal/length codes and 592 for distance
+ codes. These values were found by exhaustive searches using the program
+ examples/enough.c found in the zlib distribtution. The arguments to that
+ program are the number of symbols, the initial root table size, and the
+ maximum bit length of a code. "enough 286 9 15" for literal/length codes
+ returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+ The initial root table size (9 or 6) is found in the fifth argument of the
+ inflate_table() calls in inflate.c and infback.c. If the root table size is
+ changed, then these maximum sizes would be need to be recalculated and
+ updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
-/* Type of code to build for inftable() */
+/* Type of code to build for inflate_table() */
typedef enum {
CODES,
LENS,
DISTS
} codetype;
-extern int inflate_table OF((codetype type, unsigned short FAR *lens,
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
unsigned codes, code FAR * FAR *table,
unsigned FAR *bits, unsigned short FAR *work));
diff --git a/com32/lib/zlib/trees.c b/com32/lib/zlib/trees.c
index cf8377c..56e9bb1 100644
--- a/com32/lib/zlib/trees.c
+++ b/com32/lib/zlib/trees.c
@@ -1,5 +1,6 @@
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2003 Jean-loup Gailly
+ * Copyright (C) 1995-2010 Jean-loup Gailly
+ * detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -29,12 +30,13 @@
* Addison-Wesley, 1983. ISBN 0-201-06672-6.
*/
+/* @(#) $Id$ */
/* #define GEN_TREES_H */
#include "deflate.h"
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
# include <ctype.h>
#endif
@@ -151,7 +153,7 @@ local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
int blcodes));
local void compress_block OF((deflate_state *s, ct_data *ltree,
ct_data *dtree));
-local void set_data_type OF((deflate_state *s));
+local int detect_data_type OF((deflate_state *s));
local unsigned bi_reverse OF((unsigned value, int length));
local void bi_windup OF((deflate_state *s));
local void bi_flush OF((deflate_state *s));
@@ -162,11 +164,11 @@ local void copy_block OF((deflate_state *s, charf *buf, unsigned len,
local void gen_trees_header OF((void));
#endif
-#ifndef DEBUG_ZLIB
+#ifndef DEBUG
# define send_code(s, c, tree) send_bits(s, tree[c].Code, tree[c].Len)
/* Send a code of the given tree. c and tree must not have side effects */
-#else /* DEBUG_ZLIB */
+#else /* DEBUG */
# define send_code(s, c, tree) \
{ if (z_verbose>2) fprintf(stderr,"\ncd %3d ",(c)); \
send_bits(s, tree[c].Code, tree[c].Len); }
@@ -185,7 +187,7 @@ local void gen_trees_header OF((void));
* Send a value on a given number of bits.
* IN assertion: length <= 16 and value fits in length bits.
*/
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
local void send_bits OF((deflate_state *s, int value, int length));
local void send_bits(s, value, length)
@@ -202,31 +204,31 @@ local void send_bits(s, value, length)
* unused bits in value.
*/
if (s->bi_valid > (int)Buf_size - length) {
- s->bi_buf |= (value << s->bi_valid);
+ s->bi_buf |= (ush)value << s->bi_valid;
put_short(s, s->bi_buf);
s->bi_buf = (ush)value >> (Buf_size - s->bi_valid);
s->bi_valid += length - Buf_size;
} else {
- s->bi_buf |= value << s->bi_valid;
+ s->bi_buf |= (ush)value << s->bi_valid;
s->bi_valid += length;
}
}
-#else /* !DEBUG_ZLIB */
+#else /* !DEBUG */
#define send_bits(s, value, length) \
{ int len = length;\
if (s->bi_valid > (int)Buf_size - len) {\
int val = value;\
- s->bi_buf |= (val << s->bi_valid);\
+ s->bi_buf |= (ush)val << s->bi_valid;\
put_short(s, s->bi_buf);\
s->bi_buf = (ush)val >> (Buf_size - s->bi_valid);\
s->bi_valid += len - Buf_size;\
} else {\
- s->bi_buf |= (value) << s->bi_valid;\
+ s->bi_buf |= (ush)(value) << s->bi_valid;\
s->bi_valid += len;\
}\
}
-#endif /* DEBUG_ZLIB */
+#endif /* DEBUG */
/* the arguments must not have side effects */
@@ -249,11 +251,13 @@ local void tr_static_init()
if (static_init_done) return;
/* For some embedded targets, global variables are not initialized: */
+#ifdef NO_INIT_GLOBAL_POINTERS
static_l_desc.static_tree = static_ltree;
static_l_desc.extra_bits = extra_lbits;
static_d_desc.static_tree = static_dtree;
static_d_desc.extra_bits = extra_dbits;
static_bl_desc.extra_bits = extra_blbits;
+#endif
/* Initialize the mapping length (0..255) -> length code (0..28) */
length = 0;
@@ -318,7 +322,7 @@ local void tr_static_init()
* Genererate the file trees.h describing the static trees.
*/
#ifdef GEN_TREES_H
-# ifndef DEBUG_ZLIB
+# ifndef DEBUG
# include <stdio.h>
# endif
@@ -347,13 +351,14 @@ void gen_trees_header()
static_dtree[i].Len, SEPARATOR(i, D_CODES-1, 5));
}
- fprintf(header, "const uch _dist_code[DIST_CODE_LEN] = {\n");
+ fprintf(header, "const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {\n");
for (i = 0; i < DIST_CODE_LEN; i++) {
fprintf(header, "%2u%s", _dist_code[i],
SEPARATOR(i, DIST_CODE_LEN-1, 20));
}
- fprintf(header, "const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
+ fprintf(header,
+ "const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {\n");
for (i = 0; i < MAX_MATCH-MIN_MATCH+1; i++) {
fprintf(header, "%2u%s", _length_code[i],
SEPARATOR(i, MAX_MATCH-MIN_MATCH, 20));
@@ -378,7 +383,7 @@ void gen_trees_header()
/* ===========================================================================
* Initialize the tree data structures for a new zlib stream.
*/
-void _tr_init(s)
+void ZLIB_INTERNAL _tr_init(s)
deflate_state *s;
{
tr_static_init();
@@ -395,7 +400,7 @@ void _tr_init(s)
s->bi_buf = 0;
s->bi_valid = 0;
s->last_eob_len = 8; /* enough lookahead for inflate */
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->compressed_len = 0L;
s->bits_sent = 0L;
#endif
@@ -554,7 +559,7 @@ local void gen_bitlen(s, desc)
while (n != 0) {
m = s->heap[--h];
if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
+ if ((unsigned) tree[m].Len != (unsigned) bits) {
Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
s->opt_len += ((long)bits - (long)tree[m].Len)
*(long)tree[m].Freq;
@@ -863,14 +868,14 @@ local void send_all_trees(s, lcodes, dcodes, blcodes)
/* ===========================================================================
* Send a stored block
*/
-void _tr_stored_block(s, buf, stored_len, eof)
+void ZLIB_INTERNAL _tr_stored_block(s, buf, stored_len, last)
deflate_state *s;
charf *buf; /* input block */
ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
+ int last; /* one if this is the last block for a file */
{
- send_bits(s, (STORED_BLOCK<<1)+eof, 3); /* send block type */
-#ifdef DEBUG_ZLIB
+ send_bits(s, (STORED_BLOCK<<1)+last, 3); /* send block type */
+#ifdef DEBUG
s->compressed_len = (s->compressed_len + 3 + 7) & (ulg)~7L;
s->compressed_len += (stored_len + 4) << 3;
#endif
@@ -888,12 +893,12 @@ void _tr_stored_block(s, buf, stored_len, eof)
* To simplify the code, we assume the worst case of last real code encoded
* on one bit only.
*/
-void _tr_align(s)
+void ZLIB_INTERNAL _tr_align(s)
deflate_state *s;
{
send_bits(s, STATIC_TREES<<1, 3);
send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->compressed_len += 10L; /* 3 for block type, 7 for EOB */
#endif
bi_flush(s);
@@ -905,7 +910,7 @@ void _tr_align(s)
if (1 + s->last_eob_len + 10 - s->bi_valid < 9) {
send_bits(s, STATIC_TREES<<1, 3);
send_code(s, END_BLOCK, static_ltree);
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->compressed_len += 10L;
#endif
bi_flush(s);
@@ -917,11 +922,11 @@ void _tr_align(s)
* Determine the best encoding for the current block: dynamic trees, static
* trees or store, and output the encoded block to the zip file.
*/
-void _tr_flush_block(s, buf, stored_len, eof)
+void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
deflate_state *s;
charf *buf; /* input block, or NULL if too old */
ulg stored_len; /* length of input block */
- int eof; /* true if this is the last block for a file */
+ int last; /* one if this is the last block for a file */
{
ulg opt_lenb, static_lenb; /* opt_len and static_len in bytes */
int max_blindex = 0; /* index of last bit length code of non zero freq */
@@ -929,8 +934,9 @@ void _tr_flush_block(s, buf, stored_len, eof)
/* Build the Huffman trees unless a stored block is forced */
if (s->level > 0) {
- /* Check if the file is ascii or binary */
- if (s->data_type == Z_UNKNOWN) set_data_type(s);
+ /* Check if the file is binary or text */
+ if (s->strm->data_type == Z_UNKNOWN)
+ s->strm->data_type = detect_data_type(s);
/* Construct the literal and distance trees */
build_tree(s, (tree_desc *)(&(s->l_desc)));
@@ -976,24 +982,24 @@ void _tr_flush_block(s, buf, stored_len, eof)
* successful. If LIT_BUFSIZE <= WSIZE, it is never too late to
* transform a block into a stored block.
*/
- _tr_stored_block(s, buf, stored_len, eof);
+ _tr_stored_block(s, buf, stored_len, last);
#ifdef FORCE_STATIC
} else if (static_lenb >= 0) { /* force static trees */
#else
- } else if (static_lenb == opt_lenb) {
+ } else if (s->strategy == Z_FIXED || static_lenb == opt_lenb) {
#endif
- send_bits(s, (STATIC_TREES<<1)+eof, 3);
+ send_bits(s, (STATIC_TREES<<1)+last, 3);
compress_block(s, (ct_data *)static_ltree, (ct_data *)static_dtree);
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->compressed_len += 3 + s->static_len;
#endif
} else {
- send_bits(s, (DYN_TREES<<1)+eof, 3);
+ send_bits(s, (DYN_TREES<<1)+last, 3);
send_all_trees(s, s->l_desc.max_code+1, s->d_desc.max_code+1,
max_blindex+1);
compress_block(s, (ct_data *)s->dyn_ltree, (ct_data *)s->dyn_dtree);
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->compressed_len += 3 + s->opt_len;
#endif
}
@@ -1003,21 +1009,21 @@ void _tr_flush_block(s, buf, stored_len, eof)
*/
init_block(s);
- if (eof) {
+ if (last) {
bi_windup(s);
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->compressed_len += 7; /* align on byte boundary */
#endif
}
Tracev((stderr,"\ncomprlen %lu(%lu) ", s->compressed_len>>3,
- s->compressed_len-7*eof));
+ s->compressed_len-7*last));
}
/* ===========================================================================
* Save the match info and tally the frequency counts. Return true if
* the current block must be flushed.
*/
-int _tr_tally (s, dist, lc)
+int ZLIB_INTERNAL _tr_tally (s, dist, lc)
deflate_state *s;
unsigned dist; /* distance of matched string */
unsigned lc; /* match length-MIN_MATCH or unmatched char (if dist==0) */
@@ -1116,21 +1122,45 @@ local void compress_block(s, ltree, dtree)
}
/* ===========================================================================
- * Set the data type to ASCII or BINARY, using a crude approximation:
- * binary if more than 20% of the bytes are <= 6 or >= 128, ascii otherwise.
- * IN assertion: the fields freq of dyn_ltree are set and the total of all
- * frequencies does not exceed 64K (to fit in an int on 16 bit machines).
+ * Check if the data type is TEXT or BINARY, using the following algorithm:
+ * - TEXT if the two conditions below are satisfied:
+ * a) There are no non-portable control characters belonging to the
+ * "black list" (0..6, 14..25, 28..31).
+ * b) There is at least one printable character belonging to the
+ * "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
+ * - BINARY otherwise.
+ * - The following partially-portable control characters form a
+ * "gray list" that is ignored in this detection algorithm:
+ * (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
+ * IN assertion: the fields Freq of dyn_ltree are set.
*/
-local void set_data_type(s)
+local int detect_data_type(s)
deflate_state *s;
{
- int n = 0;
- unsigned ascii_freq = 0;
- unsigned bin_freq = 0;
- while (n < 7) bin_freq += s->dyn_ltree[n++].Freq;
- while (n < 128) ascii_freq += s->dyn_ltree[n++].Freq;
- while (n < LITERALS) bin_freq += s->dyn_ltree[n++].Freq;
- s->data_type = (Byte)(bin_freq > (ascii_freq >> 2) ? Z_BINARY : Z_ASCII);
+ /* black_mask is the bit mask of black-listed bytes
+ * set bits 0..6, 14..25, and 28..31
+ * 0xf3ffc07f = binary 11110011111111111100000001111111
+ */
+ unsigned long black_mask = 0xf3ffc07fUL;
+ int n;
+
+ /* Check for non-textual ("black-listed") bytes. */
+ for (n = 0; n <= 31; n++, black_mask >>= 1)
+ if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
+ return Z_BINARY;
+
+ /* Check for textual ("white-listed") bytes. */
+ if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
+ || s->dyn_ltree[13].Freq != 0)
+ return Z_TEXT;
+ for (n = 32; n < LITERALS; n++)
+ if (s->dyn_ltree[n].Freq != 0)
+ return Z_TEXT;
+
+ /* There are no "black-listed" or "white-listed" bytes:
+ * this stream either is empty or has tolerated ("gray-listed") bytes only.
+ */
+ return Z_BINARY;
}
/* ===========================================================================
@@ -1180,7 +1210,7 @@ local void bi_windup(s)
}
s->bi_buf = 0;
s->bi_valid = 0;
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->bits_sent = (s->bits_sent+7) & ~7;
#endif
}
@@ -1201,11 +1231,11 @@ local void copy_block(s, buf, len, header)
if (header) {
put_short(s, (ush)len);
put_short(s, (ush)~len);
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->bits_sent += 2*16;
#endif
}
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
s->bits_sent += (ulg)len<<3;
#endif
while (len--) {
diff --git a/com32/lib/zlib/trees.h b/com32/lib/zlib/trees.h
index aadfa16..d35639d 100644
--- a/com32/lib/zlib/trees.h
+++ b/com32/lib/zlib/trees.h
@@ -70,7 +70,7 @@ local const ct_data static_dtree[D_CODES] = {
{{19},{ 5}}, {{11},{ 5}}, {{27},{ 5}}, {{ 7},{ 5}}, {{23},{ 5}}
};
-const uch _dist_code[DIST_CODE_LEN] = {
+const uch ZLIB_INTERNAL _dist_code[DIST_CODE_LEN] = {
0, 1, 2, 3, 4, 4, 5, 5, 6, 6, 6, 6, 7, 7, 7, 7, 8, 8, 8, 8,
8, 8, 8, 8, 9, 9, 9, 9, 9, 9, 9, 9, 10, 10, 10, 10, 10, 10, 10, 10,
10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11,
@@ -99,7 +99,7 @@ const uch _dist_code[DIST_CODE_LEN] = {
29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, 29
};
-const uch _length_code[MAX_MATCH-MIN_MATCH+1]= {
+const uch ZLIB_INTERNAL _length_code[MAX_MATCH-MIN_MATCH+1]= {
0, 1, 2, 3, 4, 5, 6, 7, 8, 8, 9, 9, 10, 10, 11, 11, 12, 12, 12, 12,
13, 13, 13, 13, 14, 14, 14, 14, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18, 18, 18, 19, 19, 19, 19,
@@ -125,3 +125,4 @@ local const int base_dist[D_CODES] = {
32, 48, 64, 96, 128, 192, 256, 384, 512, 768,
1024, 1536, 2048, 3072, 4096, 6144, 8192, 12288, 16384, 24576
};
+
diff --git a/com32/lib/zlib/uncompr.c b/com32/lib/zlib/uncompr.c
index c3c9fa6..ad98be3 100644
--- a/com32/lib/zlib/uncompr.c
+++ b/com32/lib/zlib/uncompr.c
@@ -1,8 +1,9 @@
/* uncompr.c -- decompress a memory buffer
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2003, 2010 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+/* @(#) $Id$ */
#define ZLIB_INTERNAL
#include "zlib.h"
@@ -15,8 +16,6 @@
been saved previously by the compressor and transmitted to the decompressor
by some mechanism outside the scope of this compression library.)
Upon exit, destLen is the actual size of the compressed buffer.
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
uncompress returns Z_OK if success, Z_MEM_ERROR if there was not
enough memory, Z_BUF_ERROR if there was not enough room in the output
diff --git a/com32/lib/zlib/zlib.3 b/com32/lib/zlib/zlib.3
index 8900984..27adc4c 100644
--- a/com32/lib/zlib/zlib.3
+++ b/com32/lib/zlib/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "17 November 2003"
+.TH ZLIB 3 "19 Apr 2010"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
@@ -9,15 +9,15 @@ for full description]
The
.I zlib
library is a general purpose data compression library.
-The code is thread safe.
+The code is thread safe, assuming that the standard library functions
+used are thread safe, such as memory allocation routines.
It provides in-memory compression and decompression functions,
including integrity checks of the uncompressed data.
This version of the library supports only one compression method (deflation)
-but other algorithms will be added later
-and will have the same stream interface.
+but other algorithms may be added later
+with the same stream interface.
.LP
Compression can be done in a single step if the buffers are large enough
-(for example if an input file is mmap'ed),
or can be done by repeated calls of the compression function.
In the latter case,
the application must provide more input and/or consume the output
@@ -30,7 +30,7 @@ with an interface similar to that of stdio.
.LP
The library does not install any signal handler.
The decoder checks the consistency of the compressed data,
-so the library should never crash even in case of corrupted input.
+so the library should never crash even in the case of corrupted input.
.LP
All functions of the compression library are documented in the file
.IR zlib.h .
@@ -38,18 +38,19 @@ The distribution source includes examples of use of the library
in the files
.I example.c
and
-.IR minigzip.c .
+.IR minigzip.c,
+as well as other examples in the
+.IR examples/
+directory.
.LP
Changes to this version are documented in the file
.I ChangeLog
-that accompanies the source,
-and are concerned primarily with bug fixes and portability enhancements.
+that accompanies the source.
.LP
-A Java implementation of
.I zlib
-is available in the Java Development Kit 1.1:
+is available in Java using the java.util.zip package:
.IP
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
+http://java.sun.com/developer/technicalArticles/Programming/compression/
.LP
A Perl interface to
.IR zlib ,
@@ -57,7 +58,7 @@ written by Paul Marquess (pmqs at cpan.org),
is available at CPAN (Comprehensive Perl Archive Network) sites,
including:
.IP
-http://www.cpan.org/modules/by-module/Compress/
+http://search.cpan.org/~pmqs/IO-Compress-Zlib/
.LP
A Python interface to
.IR zlib ,
@@ -66,14 +67,11 @@ is available in Python 1.5 and later versions:
.IP
http://www.python.org/doc/lib/module-zlib.html
.LP
-A
.I zlib
-binding for
-.IR tcl (1),
-written by Andreas Kupries (a.kupries at westend.com),
-is availlable at:
+is built into
+.IR tcl:
.IP
-http://www.westend.com/~kupries/doc/trf/man/man.html
+http://wiki.tcl.tk/4610
.LP
An experimental package to read and write files in .zip format,
written on top of
@@ -81,40 +79,34 @@ written on top of
by Gilles Vollant (info at winimage.com),
is available at:
.IP
-http://www.winimage.com/zLibDll/unzip.html
+http://www.winimage.com/zLibDll/minizip.html
and also in the
.I contrib/minizip
directory of the main
.I zlib
-web site.
+source distribution.
.SH "SEE ALSO"
The
.I zlib
-web site can be found at either of these locations:
+web site can be found at:
.IP
-http://www.zlib.org
-.br
-http://www.gzip.org/zlib/
+http://zlib.net/
.LP
The data format used by the zlib library is described by RFC
(Request for Comments) 1950 to 1952 in the files:
.IP
-http://www.ietf.org/rfc/rfc1950.txt (concerning zlib format)
+http://www.ietf.org/rfc/rfc1950.txt (for the zlib header and trailer format)
.br
-http://www.ietf.org/rfc/rfc1951.txt (concerning deflate format)
+http://www.ietf.org/rfc/rfc1951.txt (for the deflate compressed data format)
.br
-http://www.ietf.org/rfc/rfc1952.txt (concerning gzip format)
-.LP
-These documents are also available in other formats from:
-.IP
-ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
+http://www.ietf.org/rfc/rfc1952.txt (for the gzip header and trailer format)
.LP
-Mark Nelson (markn at ieee.org) wrote an article about
+Mark Nelson wrote an article about
.I zlib
for the Jan. 1997 issue of Dr. Dobb's Journal;
a copy of the article is available at:
.IP
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
+http://marknelson.us/1997/01/01/zlib-engine/
.SH "REPORTING PROBLEMS"
Before reporting a problem,
please check the
@@ -127,14 +119,14 @@ Please read the
.I zlib
FAQ at:
.IP
-http://www.gzip.org/zlib/zlib_faq.html
+http://zlib.net/zlib_faq.html
.LP
before asking for help.
Send questions and/or comments to zlib at gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info at winimage.com).
.SH AUTHORS
-Version 1.2.1
-Copyright (C) 1995-2003 Jean-loup Gailly (jloup at gzip.org)
+Version 1.2.5
+Copyright (C) 1995-2010 Jean-loup Gailly (jloup at gzip.org)
and Mark Adler (madler at alumni.caltech.edu).
.LP
This software is provided "as-is,"
diff --git a/com32/lib/zlib/zutil.c b/com32/lib/zlib/zutil.c
index d692e05..898ed34 100644
--- a/com32/lib/zlib/zutil.c
+++ b/com32/lib/zlib/zutil.c
@@ -1,8 +1,9 @@
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2005, 2010 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
+/* @(#) $Id$ */
#include "zutil.h"
@@ -10,10 +11,6 @@
struct internal_state {int dummy;}; /* for buggy compilers */
#endif
-#ifndef STDC
-extern void exit OF((int));
-#endif
-
const char * const z_errmsg[10] = {
"need dictionary", /* Z_NEED_DICT 2 */
"stream end", /* Z_STREAM_END 1 */
@@ -37,31 +34,31 @@ uLong ZEXPORT zlibCompileFlags()
uLong flags;
flags = 0;
- switch (sizeof(uInt)) {
+ switch ((int)(sizeof(uInt))) {
case 2: break;
case 4: flags += 1; break;
case 8: flags += 2; break;
default: flags += 3;
}
- switch (sizeof(uLong)) {
+ switch ((int)(sizeof(uLong))) {
case 2: break;
case 4: flags += 1 << 2; break;
case 8: flags += 2 << 2; break;
default: flags += 3 << 2;
}
- switch (sizeof(voidpf)) {
+ switch ((int)(sizeof(voidpf))) {
case 2: break;
case 4: flags += 1 << 4; break;
case 8: flags += 2 << 4; break;
default: flags += 3 << 4;
}
- switch (sizeof(z_off_t)) {
+ switch ((int)(sizeof(z_off_t))) {
case 2: break;
case 4: flags += 1 << 6; break;
case 8: flags += 2 << 6; break;
default: flags += 3 << 6;
}
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
flags += 1 << 8;
#endif
#if defined(ASMV) || defined(ASMINF)
@@ -77,52 +74,52 @@ uLong ZEXPORT zlibCompileFlags()
flags += 1 << 13;
#endif
#ifdef NO_GZCOMPRESS
- flags += 1 << 16;
+ flags += 1L << 16;
#endif
#ifdef NO_GZIP
- flags += 1 << 17;
+ flags += 1L << 17;
#endif
#ifdef PKZIP_BUG_WORKAROUND
- flags += 1 << 20;
+ flags += 1L << 20;
#endif
#ifdef FASTEST
- flags += 1 << 21;
+ flags += 1L << 21;
#endif
#ifdef STDC
# ifdef NO_vsnprintf
- flags += 1 << 25;
+ flags += 1L << 25;
# ifdef HAS_vsprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# else
# ifdef HAS_vsnprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# endif
#else
- flags += 1 << 24;
+ flags += 1L << 24;
# ifdef NO_snprintf
- flags += 1 << 25;
+ flags += 1L << 25;
# ifdef HAS_sprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# else
# ifdef HAS_snprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# endif
#endif
return flags;
}
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
# ifndef verbose
# define verbose 0
# endif
-int z_verbose = verbose;
+int ZLIB_INTERNAL z_verbose = verbose;
-void z_error (m)
+void ZLIB_INTERNAL z_error (m)
char *m;
{
fprintf(stderr, "%s\n", m);
@@ -140,13 +137,16 @@ const char * ZEXPORT zError(err)
}
#if defined(_WIN32_WCE)
- /* does not exist on WCE */
+ /* The Microsoft C Run-Time Library for Windows CE doesn't have
+ * errno. We define it as a global variable to simplify porting.
+ * Its value is always 0 and should not be used.
+ */
int errno = 0;
#endif
#ifndef HAVE_MEMCPY
-void zmemcpy(dest, source, len)
+void ZLIB_INTERNAL zmemcpy(dest, source, len)
Bytef* dest;
const Bytef* source;
uInt len;
@@ -157,7 +157,7 @@ void zmemcpy(dest, source, len)
} while (--len != 0);
}
-int zmemcmp(s1, s2, len)
+int ZLIB_INTERNAL zmemcmp(s1, s2, len)
const Bytef* s1;
const Bytef* s2;
uInt len;
@@ -170,7 +170,7 @@ int zmemcmp(s1, s2, len)
return 0;
}
-void zmemzero(dest, len)
+void ZLIB_INTERNAL zmemzero(dest, len)
Bytef* dest;
uInt len;
{
@@ -213,7 +213,7 @@ local ptr_table table[MAX_PTR];
* a protected system like OS/2. Use Microsoft C instead.
*/
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, unsigned items, unsigned size)
{
voidpf buf = opaque; /* just to make some compilers happy */
ulg bsize = (ulg)items*size;
@@ -237,7 +237,7 @@ voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
return buf;
}
-void zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
{
int n;
if (*(ush*)&ptr != 0) { /* object < 64K */
@@ -272,13 +272,13 @@ void zcfree (voidpf opaque, voidpf ptr)
# define _hfree hfree
#endif
-voidpf zcalloc (voidpf opaque, unsigned items, unsigned size)
+voidpf ZLIB_INTERNAL zcalloc (voidpf opaque, uInt items, uInt size)
{
if (opaque) opaque = 0; /* to make compiler happy */
return _halloc((long)items, size);
}
-void zcfree (voidpf opaque, voidpf ptr)
+void ZLIB_INTERNAL zcfree (voidpf opaque, voidpf ptr)
{
if (opaque) opaque = 0; /* to make compiler happy */
_hfree(ptr);
@@ -297,7 +297,7 @@ extern voidp calloc OF((uInt items, uInt size));
extern void free OF((voidpf ptr));
#endif
-voidpf zcalloc (opaque, items, size)
+voidpf ZLIB_INTERNAL zcalloc (opaque, items, size)
voidpf opaque;
unsigned items;
unsigned size;
@@ -307,7 +307,7 @@ voidpf zcalloc (opaque, items, size)
(voidpf)calloc(items, size);
}
-void zcfree (opaque, ptr)
+void ZLIB_INTERNAL zcfree (opaque, ptr)
voidpf opaque;
voidpf ptr;
{
diff --git a/com32/lib/zlib/zutil.h b/com32/lib/zlib/zutil.h
index b85cec1..258fa88 100644
--- a/com32/lib/zlib/zutil.h
+++ b/com32/lib/zlib/zutil.h
@@ -1,5 +1,5 @@
/* zutil.h -- internal interface and configuration of the compression library
- * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * Copyright (C) 1995-2010 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -8,23 +8,26 @@
subject to change. Applications should only use zlib.h.
*/
+/* @(#) $Id$ */
#ifndef ZUTIL_H
#define ZUTIL_H
-#define ZLIB_INTERNAL
+#if ((__GNUC__-0) * 10 + __GNUC_MINOR__-0 >= 33) && !defined(NO_VIZ)
+# define ZLIB_INTERNAL __attribute__((visibility ("hidden")))
+#else
+# define ZLIB_INTERNAL
+#endif
+
#include "zlib.h"
#ifdef STDC
-# include <stddef.h>
+# if !(defined(_WIN32_WCE) && defined(_MSC_VER))
+# include <stddef.h>
+# endif
# include <string.h>
# include <stdlib.h>
#endif
-#ifdef NO_ERRNO_H
- extern int errno;
-#else
-# include <errno.h>
-#endif
#ifndef local
# define local static
@@ -76,7 +79,7 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#if defined(MSDOS) || (defined(WINDOWS) && !defined(WIN32))
# define OS_CODE 0x00
# if defined(__TURBOC__) || defined(__BORLANDC__)
-# if(__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
+# if (__STDC__ == 1) && (defined(__LARGE__) || defined(__COMPACT__))
/* Allow compilation with ANSI keywords only enabled */
void _Cdecl farfree( void *block );
void *_Cdecl farmalloc( unsigned long nbytes );
@@ -104,6 +107,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#ifdef OS2
# define OS_CODE 0x06
+# ifdef M_I86
+# include <malloc.h>
+# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
@@ -135,7 +141,7 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# define fdopen(fd,mode) NULL /* No fdopen() */
#endif
-#if (defined(_MSC_VER) && (_MSC_VER > 600))
+#if (defined(_MSC_VER) && (_MSC_VER > 600)) && !defined __INTERIX
# if defined(_WIN32_WCE)
# define fdopen(fd,mode) NULL /* No fdopen() */
# ifndef _PTRDIFF_T_DEFINED
@@ -147,6 +153,18 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# endif
#endif
+#if defined(__BORLANDC__)
+ #pragma warn -8004
+ #pragma warn -8008
+ #pragma warn -8066
+#endif
+
+/* provide prototypes for these when building zlib without LFS */
+#if !defined(_LARGEFILE64_SOURCE) || _LFS64_LARGEFILE-0 == 0
+ ZEXTERN uLong ZEXPORT adler32_combine64 OF((uLong, uLong, z_off_t));
+ ZEXTERN uLong ZEXPORT crc32_combine64 OF((uLong, uLong, z_off_t));
+#endif
+
/* common defaults */
#ifndef OS_CODE
@@ -181,19 +199,17 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# ifdef WIN32
/* In Win32, vsnprintf is available as the "non-ANSI" _vsnprintf. */
# if !defined(vsnprintf) && !defined(NO_vsnprintf)
-# define vsnprintf _vsnprintf
+# if !defined(_MSC_VER) || ( defined(_MSC_VER) && _MSC_VER < 1500 )
+# define vsnprintf _vsnprintf
+# endif
# endif
# endif
# ifdef __SASC
# define NO_vsnprintf
# endif
#endif
-
-#ifdef HAVE_STRERROR
- extern char *strerror OF((int));
-# define zstrerror(errnum) strerror(errnum)
-#else
-# define zstrerror(errnum) ""
+#ifdef VMS
+# define NO_vsnprintf
#endif
#if defined(pyr)
@@ -220,16 +236,16 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
# define zmemzero(dest, len) memset(dest, 0, len)
# endif
#else
- extern void zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
- extern int zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
- extern void zmemzero OF((Bytef* dest, uInt len));
+ void ZLIB_INTERNAL zmemcpy OF((Bytef* dest, const Bytef* source, uInt len));
+ int ZLIB_INTERNAL zmemcmp OF((const Bytef* s1, const Bytef* s2, uInt len));
+ void ZLIB_INTERNAL zmemzero OF((Bytef* dest, uInt len));
#endif
/* Diagnostic functions */
-#ifdef DEBUG_ZLIB
+#ifdef DEBUG
# include <stdio.h>
- extern int z_verbose;
- extern void z_error OF((char *m));
+ extern int ZLIB_INTERNAL z_verbose;
+ extern void ZLIB_INTERNAL z_error OF((char *m));
# define Assert(cond,msg) {if(!(cond)) z_error(msg);}
# define Trace(x) {if (z_verbose>=0) fprintf x ;}
# define Tracev(x) {if (z_verbose>0) fprintf x ;}
@@ -246,8 +262,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#endif
-voidpf zcalloc OF((voidpf opaque, unsigned items, unsigned size));
-void zcfree OF((voidpf opaque, voidpf ptr));
+voidpf ZLIB_INTERNAL zcalloc OF((voidpf opaque, unsigned items,
+ unsigned size));
+void ZLIB_INTERNAL zcfree OF((voidpf opaque, voidpf ptr));
#define ZALLOC(strm, items, size) \
(*((strm)->zalloc))((strm)->opaque, (items), (size))
More information about the Syslinux-commits
mailing list